Hi everyone,
I have a new Acer Aspire 5100 laptop and a FreeBSD 6.2-RC1 installed. When I
shutdown the machine by "shutdown -p now" command, the machine will hang
after printing the "All Buffers Synced. Uptime: xx:xx" messages.
If I use the "reboot" command to reboot the machine, i got the same result
as the shutdown one.
I've tried to add the following lines into /etc/rc.conf, but it didn't work.
apm_enable="YES"
apmd_enable="YES"
I've tried to use some alternative command instead of "shutdown", but they
didn't work too:
acpiconf -s 5
init 0
I've tried to disable the ACPI function on start up, the system will crash
and reboot.
Could anybody kindly help or give some hints to solve this shutting down
problem?
Thanks.
dmesg informations:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RC1 #0: Thu Nov 16 05:01:36 UTC 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table:
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 Mobile Technology MK-36 (1995.02-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x40fc2 Stepping = 2
Features=0x78bfbff
Features2=0x2001
AMD Features=0xea500800
AMD Features2=0x1d,,CR8>
real memory = 535363584 (510 MB)
avail memory = 514461696 (490 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: port 0x62,0x66 on acpi0
cpu0: on acpi0
acpi_lid0: on acpi0
acpi_button0: on acpi0
acpi_button1: on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: at device 2.0 on pci0
pci1: on pcib1
pci1: at device 0.0 (no driver attached)
pcib2: at device 4.0 on pci0
pci2: on pcib2
pcib3: at device 5.0 on pci0
pci4: on pcib3
atapci0: port
0x8440-0x8447,0x8434-0x8437,0x8438-0x843f,0x8430-0x8433,0x8400-0x840f mem
0xc0004000-0xc00041ff irq 22 at device 18.0 on pci0
ata2: on atapci0
ata3: on atapci0
ohci0: mem 0xc0005000-0xc0005fff irq 19 at device
19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: mem 0xc0006000-0xc0006fff irq 19 at device
19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: mem 0xc0007000-0xc0007fff irq 19 at
device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: on ehci0
usb2: USB revision 2.0
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pci0: at device 20.0 (no driver attached)
atapci1: port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0
ata0: on atapci1
ata1: on atapci1
pci0: at device 20.2 (no driver attached)
isab0: at device 20.3 on pci0
isa0: on isab0
pcib4: at device 20.4 on pci0
pci6: on pcib4
rl0: port 0xa000-0xa0ff mem
0xc021-0xc02100ff irq 21 at device 1.0 on pci6
miibus0: on rl0
rlphy0: on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:16:d4:64:fb:64
ath0: mem 0xc020-0xc020 irq 22 at device 2.0 on pci6
ath0: Ethernet address: 00:16:cf:9c:38:59
ath0: mac 7.8 phy 4.5 radio 5.6
cbb0: mem 0xc0211000-0xc0211fff irq 20 at device 4.0 on
pci6
cardbus0: on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci6: at device 4.1 (no driver attached)
pci6: at device 4.2 (no driver attached)
pci6: at device 4.3 (no driver attached)
pci6: at device 4.4 (no driver attached)
acpi_tz0: on acpi0
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: on acpi0
acpi_acad0: on acpi0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0
Timecounter "TSC" frequency 1995015403 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR at ata0-master UDMA33
ad4: 114473MB at ata2-master SATA150
Trying
