RE: Does FreeBSD 4.11-STABLE support the 8237R?
I run FreeBSD 4.11 stable, and I need to replace my ASUS K8V Deluxe motherboard. I am thinking about de K8V-X SE. However, instead of the 8237 chipset, it has the 8237R. Is that supported in FreeBSD 4.11 stable as well? Also, instead of the Gigabyte LAN, it has a Realtek 8201CL D version LAN. Will that work, too? I can, for the life of me, no longer find a link on the new FreeBSD site (like http://www.freebsd.org/releases/4.11-STABLE/hardware-i386.html #DISK, for instance). If anyone could tell me where the page is at, or knows the answer, I'd really appreciate it. I have the same board in a server running 4.11 (FreeBSD 4.11-STABLE #0) and no problems to report. The nic is detected as RealTek 8129/8139 but seems to function just fine. I would recommend building a temporary system, doing an install and then once you verify all is well... Swap the board into your existing machine. In regards to the hardware page, you can find it here: ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/4.11-REL EASE/HARDWARE.HTM Scott ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Does FreeBSD 4.11-STABLE support the 8237R?
Did you say you are running a server? That MB is only suitable for desktop use, as it has the slowest ethernet controller known to man on a 32/33Mhz bus. Running this MB as a server is like putting cheap, skinny tires on your porsche. DT Personaly, I appreciate your dedication to maximum performance but please notice this thread is in reference to swapping a MB for another MB and coments like yours are not appreciated. Would you prefer if I had stated? I have the same board in a crappy server running 4.11 (FreeBSD 4.11-STABLE #0) and no problems to report. Please notice I never said what the box was doing nor did I ask for your opinion of what MB/NIC I use in my systems. This SERVER is purpose built and runs stable 24/7 as a low volume outbound mail server so the performance of the NIC is not my primary concern. Please keep your useless comments to yourself as they do nothing but waste disk space, CPU time and the valuable time of people who attempt to help others on this list. Scott ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: ftp server with no shell accounts
I tried the default ftp server with FreeBSD 5.4 and users with no shell accounts but it does not work. Does anyone know of a ftp server that users would still have home directories but no shell access /sbin/nologin and that could still upload files to there home directories. The default ftpd will work with a little tweaking. 1. touch /bin/ftpshell 2. echo /bin/ftpshell /etc/shells 3. When you add your users, set their shell to /bin/ftpshell 4. echo USERNAME /etc/ftpchroot The users will be able to login via ftp and nothing else because there shell is a crap fake shell. The ftpchroot will lock them into their home directory very effectively. Scott ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: daemon to listen on localhost only?
Is there a way to tell a daemon to listen only to the localhost without using a firewall? As others have stated, check the daemon you are trying to run but many can also run via tcpserver (http://cr.yp.to/ucspi-tcp/tcpserver.html). Going this route you can limit the listening IP to localhost or whatever. I personally swear by this route as it is a good/clean method of controling services. Scott ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: daemon to listen on localhost only?
For the stock freebsd ftpd, you should be able to change inetd.conf: FROM ftp stream tcp nowait root/usr/libexec/ftpd ftpd -l TO ftp stream tcp nowait root/usr/libexec/ftpd ftpd -l -a 127.0.0.1 I think that should work but untested. Scott -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sean Murphy Sent: Wednesday, May 10, 2006 4:43 PM To: 'freebsd-questions@freebsd.org' Subject: Re: daemon to listen on localhost only? the ftp daemon that is started with inetd it is the ftp that comes with the freebsd system 5.4. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: daemon to listen on localhost only?
Actually, it would be: ftp stream tcp nowait root/usr/libexec/ftpd ftpd -l -D -a 127.0.0.1 Sorry for the confusion, Scott -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Hiemstra Sent: Wednesday, May 10, 2006 4:54 PM To: freebsd-questions@freebsd.org Subject: RE: daemon to listen on localhost only? For the stock freebsd ftpd, you should be able to change inetd.conf: FROM ftp stream tcp nowait root/usr/libexec/ftpd ftpd -l TO ftp stream tcp nowait root/usr/libexec/ftpd ftpd -l -a 127.0.0.1 I think that should work but untested. Scott -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sean Murphy Sent: Wednesday, May 10, 2006 4:43 PM To: 'freebsd-questions@freebsd.org' Subject: Re: daemon to listen on localhost only? the ftp daemon that is started with inetd it is the ftp that comes with the freebsd system 5.4. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: public samba share annoyingly asking for password
No, it doesn't work. The problem is still there on win 2k or NT clients. Any other option? Vittorio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Vittorio, This works on my network with win NT/2k/2k3/XP machines and we do not get prompted for username/password. The allow hosts portion is not required, I just needed to limit the share a bit. This host is running FreeBSD 4.10-STABLE and samba 2.2.12 so it is a little old but it functions very well. [global] log file = /var/log/samba/log.%m dns proxy = No netbios name = SMBSERVER1 server string = Samba Server socket options = TCP_NODELAY workgroup = OFFICE os level = 20 security = share preferred master = no max log size = 50 [Public Share] guest account = guest writeable = yes public = yes guest only = yes path = /data/shared/public allow hosts = 192.168.1.3 192.168.128.6 192.168.128.35 192.168.128.60 192.168.64.60 Hope this helps, Scott ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Add partition to existing disk
I have an existing system which I cannot reinstall and sysinstall seems like too much of a wizard to use on a well running existing system. When I built the system 2 years ago I decided to leave about 25GB of unpartitioned space for future unknown projects, I now have a use for the space but I can't for the life of me figure out exactly what steps are needed to use the space. The system is configured as follows: Dell PE 2650 with 3x36GB drives in a Hardware RAID 5 on a PERC controller 4.11-STABLE And the currect disklabel is: #disklabel aacd0s1 # /dev/aacd0s1c: type: ESDI disk: aacd0s1 label: flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 8849 sectors/unit: 142175187 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 409600004.2BSD 2048 1638490 # (Cyl.0 - 254*) b: 3072000 4096000 swap# (Cyl. 254*- 446*) c: 1421751870unused0 0# (Cyl.0 - 8849*) e: 12288000 71680004.2BSD 2048 1638489 # (Cyl. 446*- 1211*) f: 4096000 194560004.2BSD 2048 1638490 # (Cyl. 1211*- 1466*) g: 6144 235520004.2BSD 2048 1638489 # (Cyl. 1466*- 5290*) As you can see I have space available from 84992000 through 142175187. I have done similar things in Solaris and other OS's but I'm just not sure exactly what the FreeBSD steps are to utilize this space. Any pointers are appreciated. Thanks, Scott ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Add partition to existing disk
Thanks Jerry... I'll give it a try this evening. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry McAllister Sent: Wednesday, March 29, 2006 10:52 AM To: Scott Hiemstra Cc: freebsd-questions@freebsd.org Subject: Re: Add partition to existing disk Hi, I have an existing system which I cannot reinstall and sysinstall seems like too much of a wizard to use on a well running existing system. When I built the system 2 years ago I decided to leave about 25GB of unpartitioned space for future unknown projects, I now have a use for the space but I can't for the life of me figure out exactly what steps are needed to use the space. The system is configured as follows: Dell PE 2650 with 3x36GB drives in a Hardware RAID 5 on a PERC controller 4.11-STABLE And the currect disklabel is: #disklabel aacd0s1 # /dev/aacd0s1c: type: ESDI disk: aacd0s1 label: flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 8849 sectors/unit: 142175187 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 409600004.2BSD 2048 1638490 # (Cyl.0 - 254*) b: 3072000 4096000 swap# (Cyl. 254*- 446*) c: 1421751870unused0 0# (Cyl.0 - 8849*) e: 12288000 71680004.2BSD 2048 1638489 # (Cyl. 446*- 1211*) f: 4096000 194560004.2BSD 2048 1638490 # (Cyl. 1211*- 1466*) g: 6144 235520004.2BSD 2048 1638489 # (Cyl. 1466*- 5290*) As you can see I have space available from 84992000 through 142175187. I have done similar things in Solaris and other OS's but I'm just not sure exactly what the FreeBSD steps are to utilize this space. Any pointers are appreciated. Go to single user mode. do: fsck -p(shouldn't be needed, but just in case) mount -u / mount -a swapon -a run disklabel -e on the drive disklabel -e [-r] aacd0s1 Add the following line in the edit file it gives you. h: * * 4.2BSD 2048 16384 89 (I am not sure about that 89 for bps/cpg. Just use what it wants to) Write and quit the edit session. Then to an newfs on the /dev/aacds1h partition newfs -b 16384 -f 2048 -i 2048 /dev/raacd0s1h (You could just take the defaults for the newfs, but I like to specify block and frag the same as in the disklabel and the -i causes it to make more inodes which I seem to need on larger file systems) Add a mount point for it however you want, for example mkdir /work add a line to your /etc/fstab /dev/ad0s3h /work ufs rw 2 2 Substitute your own mount point if you created one with a different name. Type mount -aand voila, you have it. You might have to run an fsck on it. Thanks, Scott ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: How to get out of Africa?
Become root cd /stand ./sysinstall select Configure select Time Zone And that will put you into the same interface you selected africa with. Have fun, Scott -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Wayne M Barnes Sent: Tuesday, October 21, 2003 2:25 PM To: [EMAIL PROTECTED] Subject: How to get out of Africa? Dear FreeBSD, During installation, I accidentally hit Africa for my timezone. I have looked all over the documentation, and I cannot find out to reset my time zone. Does anybody else know? I installed 5.1 from the CD. Thank you, Wayne ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: anti-spam and mailing lists
Looks to me like a manager of that list or server doesn't care for your IP address / hostname or your ISP in general. Coming from the ISP industry, Optima Online is not very ISP friendly when it comes to playing nice with others. I would attempt to contact the list manager off-line or contact your ISP and ask them to for you, Scott -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Zonesville Sent: Wednesday, November 12, 2003 11:53 PM To: [EMAIL PROTECTED] Subject: anti-spam and mailing lists My email to freebsd-java is being bounced with the following error: Your message cannot be delivered to the following recipients: Recipient address: [EMAIL PROTECTED] Reason: Remote SMTP server has rejected address Diagnostic code: smtp;554 [EMAIL PROTECTED]: Sender address rejected: Access denied Remote system: dns;mx1.freebsd.org (TCP|167.206.5.69|37826|216.136.204.125|25) (mx1.FreeBSD.org ESMTP Postfix [Postfix Rules!]) What anti-spam lists are the mailing lists using? I'd like to know so I can try to get this rectified. Thanks, -Kurt __ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: environment variables and hostname...
You can use the env command to see a list of Environment variables. On my system, it doesn't appear the hostname is in there but it may be on yours. Scott - Original Message - From: Xpression [EMAIL PROTECTED] To: FreeBSD-questions [EMAIL PROTECTED] Sent: Tuesday, November 04, 2003 6:03 AM Subject: environment variables and hostname... Hi list, there is a way to list or know the environment variables, in fact, I want to know if my hostname is stored in a variable, and all variables that maintain the system...thanks... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Backup Solutions
Just so the original question does get answered, I have successfully used Backup Exec to backup FreeBSD/Linux/Solaris boxes with no real pain to mention. Veritas attempts to hide the fact they have agents for UNIX within backup exec but they are present, you just have to do a little digging on the Veritas web site. The only catches to the entire setup if you wish to use BackupExec is that the backup server must be a windows machine and for backing up FreeBSD machines you must use compat linux. Just my past findings, Scott - Original Message - From: Brendan [EMAIL PROTECTED] To: Jamie [EMAIL PROTECTED] Cc: Stephane Raimbault [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, October 14, 2003 10:06 AM Subject: Re: Backup Solutions The amanda chapter from the O'Reilly book can be found at: http://www.backupcentral.com/amanda.html -Brendan Jamie wrote: Try researching Amanda. http://www.amanda.org Amanda is also covered in O'Reilly's Unix Backup and Recovery. - Jamie On Tue, 14 Oct 2003, Stephane Raimbault wrote: Hi, I am curious as to what people using FreeBSD use for a Backup Solution. Are there any Comercial software available for Tape Backup Solutions that run well on FreeBSD? I'm looking at using a Dell PowerVault 110T LTO tape drive and was looking for software to utilize to backup the 10 servers and growing in my server farm. Thank you, Stephane. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] A friend is someone who lets you have total freedom to be yourself. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: sendmail AUTH_OPTIONS
Noah, I'm no sendmail expert, I prefer qmail myself but with some creative googling I found this which I believe will answer your question. http://www.sendmail.org/m4/tweaking_config.html#confAUTH_OPTIONS Scott Scott Hiemstra [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of admin Sent: Tuesday, June 03, 2003 7:26 PM To: [EMAIL PROTECTED] Subject: sendmail AUTH_OPTIONS Hi, okay I am going around in circles and not able to find a link which describes the AUTH_OPTIONS definitions in the .mc file. I want to know what the A and p mean? and verify that my syntax is correct. --- from sendmail.mc file --- define(`confAUTH_OPTIONS', `A p')dnl Thanks in advance, - Noah ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: DNS and natd
I've never tried it with natd on freebsd but I have on many routers just setup a loopback adapter which will allow your hosts which are inside to loopback into the webserver. I searched through the docs but I can't seem to find a specific example. Perhaps someone here has some experience with this setup. -Just as an example, my home web hiemstra.us is actually served by 192.168.1.20 on my LAN. -I don't have any funny DNS going on to get there. -My router figures out I actually need to get to 68.165.225.111 and routes the requests through the loopback -I get the desired page delivered I'm not 100% sure this is feasible in freebsd but it should be. Good luck, Scott Scott Hiemstra [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Alfonso Romero Sent: Monday, June 02, 2003 9:48 PM To: freebsd-questions Subject: Re: DNS and natd Thanks for your reply. I found the 6.1 Creating a mini-DNS system document from the Pedantic PPP Primer (http://www.freebsd.org/doc/en_US.ISO8859-1/books/ppp-primer/c831.html#AEN83 3) Do you think it fits my needs? - Original Message - From: Jack L. Stone [EMAIL PROTECTED] To: Derrick Ryalls [EMAIL PROTECTED]; 'Alfonso Romero' [EMAIL PROTECTED]; 'freebsd-questions' [EMAIL PROTECTED]; 'Chuck Swiger' [EMAIL PROTECTED] Sent: Monday, June 02, 2003 8:07 PM Subject: RE: DNS and natd At 05:07 PM 6.2.2003 -0700, Derrick Ryalls wrote: Alfonso Romero wrote: I´m using natd on a FreeBSD 4.8 box as a gateway, so my internal LAN can access Internet. I´ve configured a web server, but the local LAN machines can´t access the server by it´s domain name. If I setup my FreeBSD gateway to also act as a DNS server, are my local LAN machines going to be able to access my web server with www.ibacsoft.dynu.com, instead of 192.168.0.2? 10-bjork# nslookup www.ibacsoft.dynu.com Name:www.ibacsoft.dynu.com Address: 200.67.41.134 I believe you would need to set up a DNS server and configure it to give different results depending on the requesting ip. For bind, I think the search term is views. There was a good description of why this is so a while back, but I have long since deleted it. I don't think it will be too hard to set up, but I haven't tried myself yet. Hope this helps. -Derrick Yes, it is an internal DNS setup and I believe views requires BIND9. With BIND8+, you need two DNS setups: 1 for external and 1 for internal (LAN). Best regards, Jack L. Stone, Administrator SageOne Net http://www.sage-one.net [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: PPPoE load balancing
Maybe another option: (BPurchasing a hardware solution; I've never used one personally but I have (Bheard good things about the Fatpipe Superstream from friends ($3,000 or so). (BSeveral other companies make the exact same thing just in different forms. (BIt will allow you to bond multiple dsl/cable whatever and you don't need (BBGP. To implement BGP normally you need a pretty beefy router (My feelings (Bare a cisco 3600 and up). (B (BScott (B (B (B (BScott Hiemstra (B[EMAIL PROTECTED] (B (B (B-Original Message- (BFrom: [EMAIL PROTECTED] (B[mailto:[EMAIL PROTECTED] Behalf Of Adam Maas (BSent: Monday, June 02, 2003 11:23 PM (BTo: lukek; FreeBSD (BSubject: Re: PPPoE load balancing (B (B (B (B (B- Original Message - (BFrom: "lukek" [EMAIL PROTECTED] (BTo: "FreeBSD" [EMAIL PROTECTED] (BSent: Monday, June 02, 2003 11:03 PM (BSubject: PPPoE load balancing (B (B (B Hello, (B Let me apologise firstly if this is a topic which has been thrashed to (Bdeath (B on this list. I need some advice before I get myself into a hole that is (B very deep, dark and lonely. (B (B I need to add an additional DSL line to my exisiting network to keep up (Bwith (B the expanding bandwidth requirements of the users. In a situation like (Bthis (B my first reaction would be to get some fibre into the office and take it (B from there but the building we are currently in is unsuitable for fibre ( (B according to the provider ) therefore for the interim I have no choice but (B to get additional DSL circuits. (B (B My question is how difficult is it to get one FBSD router to reliably (Bmanage (B multiple DSL circuits. These circuits would have static IP addresses (B probably /28 on the outside and there are two distinct networks (Binternally. (B An ethernet segment and a wireless segment. (B (B (BBGP (B (B I am using IPFilter and IPNat to provide simple NAT functions and simple (B firewalling functions. If I create further external links ie tun0 and tun1 (B will this create problems for NAT ? I am contemplating separating the two (B internal networks so that the ethernet segment gets routed to tun0 and (B wireless to tun1. Would I need two instances of IPNat and IPFilter or can (BI (B wrap all the rules into one instance of these tools ? (B (B Is there a smarter way to do this ? (B (B (BA burstable T3 (It's copper) (B (B Any advice is appreciated as I suspect that this is not a trivial thing to (B accomplish reliably and given no other real options at this time I have to (B come up with a solution that is reliable. Ideally it would be great to be (B able to get load balancing and failover working but I won't push my luck. (B (B Regards, (B (B LukeK (B (B (BDSL is not meant for multiple links. Having multiple links and running BGP (Bwith your provider will work, but likely should use a non-PPPoE DSL (Bimplementation . Best solution is either multiple T1's and a real router or (Ba T3 of some sort if you can't get fibre. (B (BAdam (B (B___ (B[EMAIL PROTECTED] mailing list (Bhttp://lists.freebsd.org/mailman/listinfo/freebsd-questions (BTo unsubscribe, send any mail to "[EMAIL PROTECTED]" (B (B (B (B___ (B[EMAIL PROTECTED] mailing list (Bhttp://lists.freebsd.org/mailman/listinfo/freebsd-questions (BTo unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: PPPoE load balancing
Valid point, I must have been dreaming when I originally read his post... (B (BScott (B (B (B (B-Original Message- (BFrom: [EMAIL PROTECTED] (B[mailto:[EMAIL PROTECTED] Behalf Of Adam Maas (BSent: Tuesday, June 03, 2003 8:02 AM (BTo: Scott Hiemstra; FreeBSD (BSubject: Re: PPPoE load balancing (B (B (B (B (B- Original Message - (BFrom: "Scott Hiemstra" [EMAIL PROTECTED] (BTo: "FreeBSD" [EMAIL PROTECTED] (BSent: Monday, June 02, 2003 11:37 PM (BSubject: RE: PPPoE load balancing (B (B (B Maybe another option: (B Purchasing a hardware solution; I've never used one personally but I have (B heard good things about the Fatpipe Superstream from friends ($3,000 or (Bso). (B Several other companies make the exact same thing just in different forms. (B It will allow you to bond multiple dsl/cable whatever and you don't need (B BGP. To implement BGP normally you need a pretty beefy router (My (Bfeelings (B are a cisco 3600 and up). (B (B Scott (B (B (B (BFor what he's doing, I'd just run a routing daemon on a BSD box, or a Cisco (B2600. No need for a full table. (B (BAdam (B (B___ (B[EMAIL PROTECTED] mailing list (Bhttp://lists.freebsd.org/mailman/listinfo/freebsd-questions (BTo unsubscribe, send any mail to "[EMAIL PROTECTED]" (B (B (B (B___ (B[EMAIL PROTECTED] mailing list (Bhttp://lists.freebsd.org/mailman/listinfo/freebsd-questions (BTo unsubscribe, send any mail to "[EMAIL PROTECTED]"