Bind 9.3.0 Server on Freebsd
Hello list, i need to install a DNS-Server for more than 1000 Domains, official internet DNS-Server. I tried out to install a bind 9.3.0, but after i start the server a few minutes later it don't answers any dns-requests. Has someone an idea where i find information to tune my dns-server? Volker ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
strange dmesg-output on FreeBSD 5.3
Hello list, if have installed 5.3 and after rebooting i have a strange dmesg-output. Perhaps its nothing to worry about, but perhaps you can have a look on it: ## Waiting 15 seconds for SCSI devices to settle aacd0: RAID 5 on aac0 aacd0: 139995MB (286709760 sectors) aac0: Error 5 sending GetDeviceProbeInfo command aac0: Error 5 sending GetDeviceProbeInfo command ahd0: Recovery Initiated - Card was not paused Dump Card State Begins ahd0: Dumping Card State at program address 0x31 Mode 0x33 INTSTAT[0x0] SELOID[0x8] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x18]:(P_DATAOUT|SELI|ATNI) SCSIPHASE[0x0] SCSIBUS[0x80] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x40]:(ENSELO) SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x10]:(SELINGO) SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 16 CMDS_PENDING = 8 LASTSCB 0x CURRSCB 0x8 NEXTSCB 0x0 qinstart = 15 qinfifonext = 15 QINFIFO: WAITING_TID_QUEUES: 8 ( 0x8 ) 9 ( 0x7 ) 10 ( 0x6 ) 11 ( 0x5 ) 12 ( 0x4 ) 13 ( 0x3 ) 14 ( 0x2 ) 15 ( 0x1 ) Pending list: 1 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xf7]:(TID) 2 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xe7] 3 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xd7] 4 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xc7] 5 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xb7] 6 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xa7] 7 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x97] 8 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x87] Total 8 Kernel Free SCB list: 9 10 11 12 13 14 15 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]: (ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) ahd0: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]: (ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) ahd0: REG0 == 0xa185, SINDEX = 0x120, DINDEX = 0x120 ahd0: SCBPTR == 0x8, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x7 CDB 12 0 0 0 24 0 STACK: 0x23 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Dump Card State Ends (probe29:ahd0:0:15:0): SCB 0x1 - timed out (probe29:ahd0:0:15:0): Other SCB Timeout (probe29:ahd0:0:15:0): No other SCB worth waiting for... ahd0: Issued Channel A Bus Reset. 8 SCBs aborted ahd1: Recovery Initiated - Card was not paused Dump Card State Begins ahd1: Dumping Card State at program address 0x36 Mode 0x33 INTSTAT[0x0] SELOID[0x8] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x18]:(P_DATAOUT|SELI|ATNI) SCSIPHASE[0x0] SCSIBUS[0x80] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x40]:(ENSELO) SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x10]:(SELINGO) SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 16 CMDS_PENDING = 8 LASTSCB 0x CURRSCB 0x8 NEXTSCB 0x0 qinstart = 15 qinfifonext = 15 QINFIFO: WAITING_TID_QUEUES: 8 ( 0x8 ) 9 ( 0x7 ) 10 ( 0x6 ) 11 ( 0x5 ) 12 ( 0x4 ) 13 ( 0x3 ) 14 ( 0x2 ) 15 ( 0x1 ) Pending list: 1 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xf7]:(TID) 2 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xe7] 3 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xd7] 4 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xc7] 5 FIFO_USE[0x0]
Perl 5.005 on Freebsd 5.3
Hello list, i need the perlversion 5.005 on Freebsd 5.3. I tried to compile it by hand, but when i try make i got an error like make: don't know how to make built-in. Stop I need this perl-version only for one application :-/ Perhaps anybody has an idea. I also need version 5.8.5, but thats not the problem. Perhaps you can help me. Volker ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Experiences with systemupdate Freebsd 4.9 - 5.3
Hello list, has anybody tried to update a freebsd 4.9 incl. apache, mysql and other ports to 5.3 or 5.2? I have a server with performanceproblems and want to try an other release. I found a howto on freebsd to update from 4.x to 5.3, but i don't know if it works. Perhaps you can send me your reports/results/tipps and tricks. Volker ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
MultiProcessor Kernel on HP ProLiant
Hallo List, i have problems on a freebsd 4.9 with Multiprocessor on a HP-Server. After compiling and installing the kernel i reboot the Server and the boot-process fails without a detailed error. Has anybody the same problems on HP and Dual-Processeor-maschines? Perhaps someone has a solution... Volker Lieder ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Mbuff on freebsd 4.x
Hello list, i have a problem on several freebsd-servers with the mbufs shown by netstat -m I have already compiled the kernel to switch the allocated size to 128MB mbufs and 32MB mbufs clusters, but some systems take the hole memory by time. First the system only needs 8MB. Has someone the same problems? My issue is that the system has problems to free the memory. Anybody an idea? Volker Lieder ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
German timeoutput on freebsd and php
Hello, i have a freebsd-Server version 4.9 with php 4.3.6 and apache 2.0.49. Now i want to use a php-script which outputs the time in german view. For this i use ? setlocale(LC_TIME, de_DE); print strftime(%A, %d, %B %Y | %Rh); ? But the output i get is Friday, 15, October 2004 | 10:49 Has anybody an idea where i have to put some information for the usage of de_DE? Volker ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Connect from Freebsd 4.10 to Oracle 9i
Hello List, i have a strange problem. I have to connect to an oracle 9i server with a freebsd 4.10 machine. I have tried to compile a 9i client for freebsd, but run in severeal problems. Has anybody a solution or an idea to handle this problem? Perhaps its possible to connect to the database with an older version? We tried the shipped in version 7 from freebsd, but this don't work. Hope anybody has a hint, i spend several hours in this problem :-( Volker Lieder ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Large Backup with Amanda
Hello List, i have a little question. I have to backup nearly 330GB of Data in my company from different hosts. At this moment we have installed 2 Servers. One server catches all the backups from the different clients with amanda and makes a huge folder within all the backup-files. After that we backup these folders in 80GB-portions on the other server which has a backup-tape, also with amanda. Is it possible to backup these files easily with a tar or is an amanda-backup necessary? Or has anybody an other solution or idea? Volker ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Large Backup with Amanda
Martin Hepworth wrote: Why the multilevel backups? Are you using files based tapes in amanda for the 1st machine then real tapes in the 2nd? On the first machine we have virtual devices on a hard disk, on the second machine is a backup-tape on which we backup the files created on the first machine, also with amanda. And i think the second amanda isn't necessary because we already dumped the files on the first machine... you can use tar to backup if really want, but you loose the power of amanda where you can keep the index file separate and it will tell you which tape to go get when you need a restore. -- Martin Hepworth Snr Systems Administrator Solid State Logic Tel: +44 (0)1865 842300 Volker Lieder wrote: Hello List, i have a little question. I have to backup nearly 330GB of Data in my company from different hosts. At this moment we have installed 2 Servers. One server catches all the backups from the different clients with amanda and makes a huge folder within all the backup-files. After that we backup these folders in 80GB-portions on the other server which has a backup-tape, also with amanda. Is it possible to backup these files easily with a tar or is an amanda-backup necessary? Or has anybody an other solution or idea? Volker ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
New Freebsd-FTP-Mirror in Germany
Hello List, we are an internet-service-provider in Frankfurt. We have installed a new mirror for Freebsd. It is soon available on ftp3.de.freebsd.org. The server is placed at DECIX in Frankfurt/Main and has an 1GBit interface. Hope the server helps to make FreeBSD more popular. A rsync is also possible with rsync://212.19.57.133/FreeBSD and also soon with the official hostname from FreeBSD. Nice evening, Volker Lieder Plus.Line AG www.plusline.de ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
HDD-UDMA-100 support at setup
Hello, I want to install a Freebsd 4.9 System with a 40GB UDMA-100 HDD. After the CD has booted i got an error while the IDE-Bus is scanning. Has anybody solved this Problem? On other Systems it is possible to solve this problems with deactivating this function in the bios, but this bios hasn't such a switchbutton. Any idea? Volker ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Special Keys in less
Hello, i have a Freebsd 4.9 installed and have the following wish/problem. I want to use the Pos1 and End-Keys in less. For Pos1 the beginning of the file should be shown and for End the end. Has anybody an idea how to configure less so that this could work? Volker ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Home, End Keys in less with putty on Freebsd
Hello, i have Problems using the home and end key with putty on a freebsd-box. I have read that there are some problems with this, but i didn't find a workaround that works for me. It is a Freebsd 4.9 and the actual putty-client. Has anybody an idea? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]