9.2
Hi! I have to used FreeBSD 10.0-ALPHA1 for a while but it was to difficult for me. I run FreeBSD on iMac 11,1 which has: Chipset Model: ATI Radeon HD 4850 Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID:0x944a Revision ID: 0x ROM Revision: 113-B9110C-425 EFI Driver Version: 01.00.383 Displays: iMac: Display Type: LCD Resolution: 2560 x 1440 Pixel Depth: 32-Bit Color (ARGB) Main Display: Yes Mirror: Off Online: Yes Built-In: Yes Connection Type: DisplayPort On FreeBSD 10.0-ALPHA1 it worked very good but for me 3D is not important. I installed FreeBSD 9.2 one hour ago without problem and run portsnap fetch extract and I like to install Xorg and KDE. Do I need to have in make.conf with_new_xorg=yes, please? Does xorg t need hal?. Does anyone has Radeon 4850 GPU type, please and it works? I had problems with sound settings on CURRENT and I note that will be better now. Thank you very much. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: sound settings
On Friday 20 September 2013 20:54:08 Martin Alejandro Paredes Sanchez wrote: On Friday 20 September 2013 14:26:08 Ajtim wrote: Hi! My system is FreeBSD 10.0-ALPHA1 #0 r255501: Fri Sep 13 01:57:31 UTC 2013 r...@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 installed on iMac 11,1. It works very good but I don't know how to setup sound system. After start system: cat /dev/sndstat Installed devices: pcm0: ATI R6xx (HDMI) (play) pcm1: Cirrus Logic CS4206 (Internal Analog 4.0/2.0) (play/rec) default pcm2: Cirrus Logic CS4206 (Rear Analog) (play/rec) pcm3: Cirrus Logic CS4206 (Rear Digital) (play/rec) You have 4 devices where the sound can go which one has the speakers pluged in, you especify with (as root) # sysctl hw.snd.default_unit=n test sending a file to the sound system % cat filename /dev/dsp ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org I did but it doesn't work. Computer is iMac. And I found somewhere that hints should be in device.hints but I fon't know how to setup them. -- Mitja --- http://redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
sound settings
Hi! My system is FreeBSD 10.0-ALPHA1 #0 r255501: Fri Sep 13 01:57:31 UTC 2013 r...@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 installed on iMac 11,1. It works very good but I don't know how to setup sound system. After start system: cat /dev/sndstat Installed devices: pcm0: ATI R6xx (HDMI) (play) pcm1: Cirrus Logic CS4206 (Internal Analog 4.0/2.0) (play/rec) default pcm2: Cirrus Logic CS4206 (Rear Analog) (play/rec) pcm3: Cirrus Logic CS4206 (Rear Digital) (play/rec) Than I run sysctl dev.hdaa: dev.hdaa.0.%desc: ATI R6xx Audio Function Group dev.hdaa.0.%driver: hdaa dev.hdaa.0.%location: nid=1 dev.hdaa.0.%pnpinfo: type=0x01 subsystem=0x00aa0100 dev.hdaa.0.%parent: hdacc0 dev.hdaa.0.nid2: audio output Widget cap: 0x0201 DIGITAL STEREO Association: 0 (0x0001) OSS: pcm (pcm) Stream cap: 0x0001 PCM PCM cap: 0x00020070 16 bits, 32 44 48 KHz dev.hdaa.0.nid3: pin: Digital-out (Jack) Widget cap: 0x00400381 DIGITAL UNSOL STEREO Association: 0 (0x0001) Pin cap: 0x0094 PDC OUT HDMI Pin config: 0x18560010 as=1 seq=0 device=Digital-out conn=Jack ctype=Digital loc=0x18 color=Unknown misc=0 Pin control: 0x0040 OUT Connections: 1 + - nid=2 [audio output] dev.hdaa.0.nid3_config: 0x18560010 as=1 seq=0 device=Digital-out conn=Jack ctype=Digital loc=0x18 color=Unknown misc=0 dev.hdaa.0.nid3_original: 0x18560010 as=1 seq=0 device=Digital-out conn=Jack ctype=Digital loc=0x18 color=Unknown misc=0 dev.hdaa.0.config: forcestereo,ivref50,ivref80,ivref100,ivref,vref dev.hdaa.0.gpi_state: dev.hdaa.0.gpio_state: dev.hdaa.0.gpio_config: dev.hdaa.0.gpo_state: dev.hdaa.0.gpo_config: dev.hdaa.0.reconfig: 0 dev.hdaa.1.%desc: Cirrus Logic CS4206 Audio Function Group dev.hdaa.1.%driver: hdaa dev.hdaa.1.%location: nid=1 dev.hdaa.1.%pnpinfo: type=0x01 subsystem=0x106b5100 dev.hdaa.1.%parent: hdacc1 dev.hdaa.1.nid2: audio output Widget cap: 0x000d041d PWR STEREO Association: 4 (0x0001) OSS: pcm (pcm) Stream cap: 0x0003 FLOAT32 PCM PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz Output amp: 0x80017f73 mute=1 step=127 size=1 offset=115 (-57/6dB) dev.hdaa.1.nid3: audio output Widget cap: 0x000d041d PWR STEREO Association: 3 (0x0001) OSS: pcm (pcm) Stream cap: 0x0003 FLOAT32 PCM PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz Output amp: 0x80017f73 mute=1 step=127 size=1 offset=115 (-57/6dB) dev.hdaa.1.nid4: audio output Widget cap: 0x000d041d PWR STEREO Association: 3 (0x0004) OSS: pcm (pcm) Stream cap: 0x0003 FLOAT32 PCM PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz Output amp: 0x80017f73 mute=1 step=127 size=1 offset=115 (-57/6dB) dev.hdaa.1.nid5: audio input Widget cap: 0x0018051b PWR STEREO Association: 1 (0x0001) Stream cap: 0x0003 FLOAT32 PCM PCM cap: 0x001e01f5 16 20 24 32 bits, 8 16 32 44 48 88 96 KHz Input amp: 0x80033f33 mute=1 step=63 size=3 offset=51 (-51/12dB) Connections: 2 + - nid=12 [pin: Line-in (Blue Jack)] (selected) + [DISABLED] - nid=18 [pin: Line-out (None)] [DISABLED] dev.hdaa.1.nid6: audio input Widget cap: 0x0018051b PWR STEREO Association: 0 (0x0001) Stream cap: 0x0003 FLOAT32 PCM PCM cap: 0x001e01f5 16 20 24 32 bits, 8 16 32 44 48 88 96 KHz Input amp: 0x80033f33 mute=1 step=63 size=3 offset=51 (-51/12dB) Connections: 2 + - nid=13 [pin: Mic (Fixed)] (selected) + [DISABLED] - nid=14 [pin: Line-out (None)] [DISABLED] dev.hdaa.1.nid7: audio input Widget cap: 0x00180791 PWR DIGITAL UNSOL STEREO Association: 2 (0x0001) Stream cap: 0x0007 AC3 FLOAT32 PCM PCM cap: 0x001e0570 16 20 24 32 bits, 32 44 48 96 192 KHz Connections: 1 + - nid=15 [pin: SPDIF-in (White Jack)] dev.hdaa.1.nid8: audio output Widget cap: 0x00040611 PWR DIGITAL STEREO Association: 5 (0x0001) OSS: pcm (pcm) Stream cap: 0x0007 AC3 FLOAT32 PCM PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz dev.hdaa.1.nid9: pin: Headphones (Green Jack) Widget cap: 0x00410581 PWR UNSOL STEREO Association: 4 (0x0001) Pin cap: 0x001c PDC HP OUT Pin config: 0x012b4050 as=5 seq=0 device=Headphones conn=Jack ctype=Combo loc=Rear color=Green misc=0 Pin control: 0x00c0 HP OUT Connections: 1 + - nid=2 [audio output] dev.hdaa.1.nid9_config: 0x012b4050 as=5 seq=0 device=Headphones conn=Jack ctype=Combo loc=Rear color=Green misc=0 dev.hdaa.1.nid9_original: 0x012b4050 as=5 seq=0 device=Headphones conn=Jack ctype=Combo loc=Rear color=Green misc=0 dev.hdaa.1.nid10: pin: Speaker (Fixed) Widget cap: 0x00410581 PWR UNSOL STEREO Association: 3 (0x0001) Pin cap: 0x0054 PDC OUT BAL Pin config: 0x90100140 as=4 seq=0 device=Speaker conn=Fixed ctype=Unknown loc=Internal color=Unknown misc=1 Pin control: 0x0040 OUT Connections: 1 + - nid=3 [audio output] dev.hdaa.1.nid10_config: 0x90100140 as=4 seq=0 device=Speaker conn=Fixed ctype=Unknown loc=Internal color=Unknown misc=1 dev.hdaa.1.nid10_original: 0x90100140 as=4 seq=0 device=Speaker conn=Fixed ctype=Unknown loc=Internal color=Unknown misc=1 dev.hdaa.1.nid11: pin: Speaker
RC3 on iMac works
Hi! Today I installed FreeBSD 9.2 RC3 (amd64) on iMac: Model Name:iMac Model Identifier: iMac11,1 Processor Name: Intel Core i7 Processor Speed: 2.8 GHz Number of Processors: 1 Total Number of Cores:4 L2 Cache (per Core): 256 KB L3 Cache: 8 MB Memory: 8 GB ATI Radeon HD 4850: Chipset Model:ATI Radeon HD 4850 Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID:0x944a Revision ID: 0x ROM Revision: 113-B9110C-425 EFI Driver Version: 01.00.383 Displays: iMac: Display Type: LCD Resolution: 2560 x 1440 Pixel Depth: 32-Bit Color (ARGB) Main Display: Yes Mirror: Off Online: Yes Built-In: Yes Connection Type: DisplayPort I didn't installed yet Xorg and I don't know how will be with radeon drivers. I want to install KDE4. Installation was so smooth. I had rEFIt installed and on the end of FreeBSD installation I modified default MBR scheme to GPT partition scheme and it works :). Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: FreeBSD 9.2
http://forums.macrumors.com/showthread.php?t=1619404 It is helpful too… On Aug 15, 2013, at 4:14 PM, Doug Hardie bc...@lafn.org wrote: On 15 August 2013, at 06:37, ajtiM lum...@gmail.com wrote: How will be ATI supported in FreeBSD 9.2, please? I like bluetooth mouse. Is it supported? I try Linux Mint and it works perfect. I am downloading live CD for NetBSD (jibbed) and I will see how is works but I like to install FreeBSD (not double boot, just FreeBSD). See: http://docs.freebsd.org/cgi/mid.cgi?28915479-B712-4ED0-A041-B75F2F59FECA Thats not a complete answer as I don't use any of the user interface stuff. However, it will give a starting point for you. I have updated my two newest minis to run 9.2 (latest candidate). Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: FreeBSD 9.2
Thank you very much. I will wait for 9.2 release or switch to Linux which works but it is not hat I want it… On Aug 15, 2013, at 4:14 PM, Doug Hardie bc...@lafn.org wrote: On 15 August 2013, at 06:37, ajtiM lum...@gmail.com wrote: How will be ATI supported in FreeBSD 9.2, please? I like bluetooth mouse. Is it supported? I try Linux Mint and it works perfect. I am downloading live CD for NetBSD (jibbed) and I will see how is works but I like to install FreeBSD (not double boot, just FreeBSD). See: http://docs.freebsd.org/cgi/mid.cgi?28915479-B712-4ED0-A041-B75F2F59FECA Thats not a complete answer as I don't use any of the user interface stuff. However, it will give a starting point for you. I have updated my two newest minis to run 9.2 (latest candidate). Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
FreeBSD 9.2
Hi! I did stop using FreeBSD three months ago and with to iMac computer (older one) but I like start using FreeBSD again - I like it more. My computer is: iMac 27-inch, Late 2009 Processor 2.8 GHz Intel Core i7 Memory 8GB and graphics cars is ATI Radeon: Chipset Model: ATI Radeon HD 4850 Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) How will be ATI supported in FreeBSD 9.2, please? I like bluetooth mouse. Is it supported? I try Linux Mint and it works perfect. I am downloading live CD for NetBSD (jibbed) and I will see how is works but I like to install FreeBSD (not double boot, just FreeBSD). Thanks in advance. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: reporting clang version?
On Saturday, April 13, 2013 16:40:20 mrkvrg wrote: Hello Robert, Is this what you are looking for? clang --version or clang -v My system reports the following for both parameters: FreeBSD clang version 3.0 (branches/release_30 142614) 20111021 Target: i386-unknown-freebsd9.0 Thread model: posix Cheers ... Marek On Sat, 13 Apr 2013 14:34:41 Robert Huff wrote: Looking at the man page I can find no option for reporting the version - have I missed something? Respectfully, Robert Huff clang -v FreeBSD clang version 3.1 (branches/release_31 156863) 20120523 Target: i386-unknown-freebsd9.0 Thread model: posix /usr/local/bin/clang -v clang version 3.2 (tags/RELEASE_32/final) Target: i386-portbld-freebsd9.1 Thread model: posix Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: portsnap
On Saturday, April 06, 2013 20:37:45 Joshua Isom wrote: On 4/6/2013 5:01 PM, ajtiM wrote: Hi! Are there problems with portsnap servers, please? I saw on fresports.org Opera update long eight or more hours ago but my portsnap fetch update shows: portsnap fetch update Looking up portsnap.FreeBSD.org mirrors... 6 mirrors found. Fetching snapshot tag from your-org.portsnap.freebsd.org... done. Latest snapshot on server matches what we already have. No updates needed. Ports tree is already up to date. Thanks in advance... Mitja The key word is snapshot for portsnap. If you're updating every couple hours, you'll want svn instead. A snapshot is just a state in time, periodic but not continuous. I don't know off hand how often the portsnap snapshot is updated. ___ Thank you for the answer but I never waited more than eight(8) hours for update exceot if it was something wrong and I am user more than three (3) years. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
portsnap
Hi! Are there problems with portsnap servers, please? I saw on fresports.org Opera update long eight or more hours ago but my portsnap fetch update shows: portsnap fetch update Looking up portsnap.FreeBSD.org mirrors... 6 mirrors found. Fetching snapshot tag from your-org.portsnap.freebsd.org... done. Latest snapshot on server matches what we already have. No updates needed. Ports tree is already up to date. Thanks in advance... Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
smartd
Hi! I installed smartmontools, start_smartd=yes I have in rc.conf and I edited /usr/local/etc/smart.conf where I have: /dev/ada0 -a -d auto -o on -S on -s (S/../.././02|L/../../6/03) -m root When I use top there are no smartd and if I run smartd again than top shows me smartd for few seconds and than it gone. smartctl -d auto -i /dev/ada0 show: smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-RELEASE i386] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Device Model: WDC WD800JB-00FSA0 Serial Number:WD-WCAJD1048022 Firmware Version: 77.07W77 User Capacity:80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is:In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 (minor revision not indicated) Local Time is:Sun Mar 31 17:11:23 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled ps auxww | grep smartd shows: root 1342 0.0 0.1 11004 2304 ?? I11:32AM 0:00.02 /usr/local/sbin/smartd -c /usr/local/etc/smartd.conf -p /var/run/smartd.pid root 1659 0.0 0.1 11004 2340 ?? I11:33AM 0:00.02 smartd root 1668 0.0 0.1 11004 2340 ?? I11:35AM 0:00.02 smartd root 7553 0.0 0.1 11004 2364 ?? I11:41AM 0:00.02 smartd root 8589 0.0 0.2 11004 3476 ?? I 3:48PM 0:00.01 smartd root 8936 0.0 0.1 9636 1688 1 S+5:22PM 0:00.00 grep smartd Are my settings correct, please? Is it good that I put in /etc/periodic.conf: daily_status_smart_devices=/dev/ada0 Thanks in advance. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: smartd
On Monday, April 01, 2013 00:39:53 Polytropon wrote: On Sun, 31 Mar 2013 17:25:32 -0500, ajtiM wrote: I installed smartmontools, start_smartd=yes I have in rc.conf Without further investigation - shouldn't that be smartd_enable=YES conforming to the syntax of other service start commands? At least that might be the reason why smartd doesn't automatically start. Sadly I can't find a reference to how to edit rc.conf in man smartd; at least the manual explains the options well... ;-) About smart_enable I red in the bellow link: http://www.freebsddiary.org/smart.php and also here is one: http://forums.freebsd.org/showthread.php?t=29503 Thank you. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: smartd
On Sunday, March 31, 2013 19:24:49 Michael Powell wrote: Polytropon wrote: On Sun, 31 Mar 2013 17:25:32 -0500, ajtiM wrote: I installed smartmontools, start_smartd=yes I have in rc.conf Without further investigation - shouldn't that be smartd_enable=YES conforming to the syntax of other service start commands? At least that might be the reason why smartd doesn't automatically start. Sadly I can't find a reference to how to edit rc.conf in man smartd; at least the manual explains the options well... ;-) This is correct, as per: /usr/ports/sysutils/smartmontools/files/pkg-message.in Don't know if it's a typo in his email but he was missing a on the: daily_status_smart_devices=/dev/ada0 line as well. -Mike Yes, it was a typo and I don't have yet in periodic.conf. Thank you. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
skype
Hi! My system: FreeBSD 9.1-RELEASE #0 r243826: Tue Dec 4 06:55:39 UTC 2012 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 and I use Skype 2.1.0.81 from ports. When I am using Skype, the conversation often (every 1-5 minutes) gets disconnected or better I hear but the other side doesn't hear me. I know that long time ago the line kern.hz=100 in loader.conf help me but it doesn't work anymore. I start using my Androind phone and I don't have any problem. The friend also talking with people from Europe and USA which they have Linux or Windows and it works. Thanks in advance... Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
opera - ghostery
Hi! I am an Opera user long time and I use extension Ghostery long time too but now on Opera 12.14 I had a problem with Ghostery wizard setting each time when I start Opera. When I exit Opera I use Tool-Delete Private Data where I have checked everything except Delete settings and data for all extensions. I uninstalled all other extension but the problem persist. Thanks in advance. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
freebsd-carddeck-kde4
Now that games/freebsd-carddeck-kde4 is DEPRECATED, would it make sense to remove the FREEBSD option from games/kdegames4? I installed KDE 4.9.5 from are51, today I run portmaster -a and it stopped because games/freebsd-carddeck-kde4 is DEPRECATED. How could I solved this problem, please? I didn't find any pkg freebsd- carddeck-kde4 and pkg delete didn't find... Thanks in advance. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: freebsd-carddeck-kde4
On Tuesday 05 February 2013 16:42:08 ajtiM wrote: Now that games/freebsd-carddeck-kde4 is DEPRECATED, would it make sense to remove the FREEBSD option from games/kdegames4? I installed KDE 4.9.5 from are51, today I run portmaster -a and it stopped because games/freebsd-carddeck-kde4 is DEPRECATED. How could I solved this problem, please? I didn't find any pkg freebsd- carddeck-kde4 and pkg delete didn't find... Thanks in advance. I am sorry for the panick...the name is kde4-freebsd-carddeck Thanks. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
ports, area51
Hi! I have installed KDE 4.9.5 and Calligra 2.5.5 from area51. I am not sure how is working: I use portsnap which update ports and KDE 4.9.5 ports are merged. Last time I saw many update for KDE 4.8.4 which update KDE 4.9.5 ports and so on. Does anyone knows when KDE 4.9.5 will be out in ports? They said after FreeBSD 9.1 but when should be the date for after? Thank you. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: [kde-freebsd] ports, area51
On Sunday 03 February 2013 23:40:46 Olivier Smedts wrote: Hi, 2013/2/3 ajtiM lum...@gmail.com: Hi! I have installed KDE 4.9.5 and Calligra 2.5.5 from area51. I am not sure how is working: I use portsnap which update ports and KDE 4.9.5 ports are merged. Last time I saw many update for KDE 4.8.4 which update KDE 4.9.5 ports and so on. Does anyone knows when KDE 4.9.5 will be out in ports? They said after FreeBSD 9.1 but when should be the date for after? I think the answer is now : http://www.freshports.org/commit.php?category=astroport=marblefiles=yesme ssage_id=201302032010.r13kadmh024...@svn.freebsd.org Cheers Thank you. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Opera
On Friday 01 February 2013 23:04:27 Parv wrote: in message 3869488.94aln8e...@luna.wi.rr.com, wrote ajtiM thusly... Hi! I use Opera 12.12. I use KDE 4 and Fluxbox. In operaprefs.ini I have [File Selector] Dialog Toolkit=4 which help me that Opera works othervise I get: libpng error: incorrect data check libpng error: incorrect data check Segmentation fault (core dumped) This happened on KDE but without above lines in operaprefs.ini, Opera works without problem on Fluxbox. What is different, please? (Go to opera:config by typing in the address bar. Then in the search field (one with magnifying lend), type toolkit. You will then see only File Selector: Dialog Toolkit option. When you click the [?] icon, you will the values (0-4) and short explanation.) With that out of way, option value 4 tells opera to use X11 for file selector instead of auto detected one, Qt, GTK, or KDE one. Seems like any or all of opera, kde, png library need to be rebuilt, possibly along with other respective dependencies. Sorry, I couldn't be of much help with this. Looks like Opera has problem autodetect on KDE but not in Fluxbox. Thank you very much for explanation. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Opera
On Saturday 02 February 2013 14:19:17 Polytropon wrote: On Sat, 02 Feb 2013 05:35:46 -0600, ajtiM wrote: Looks like Opera has problem autodetect on KDE but not in Fluxbox. This is because Fluxbox is neither KDE or Gnome. :-) But simply coredumping is a bad default value for how to act when not using KDE or Gnome. I'm using Opera on WindowMaker here for many years without that specific error (11.50 at the moment), so maybe another sign for disimproved software... :-( As I remember a problem started with Opera 12?? (I forgot which one but 12 for sure). Thank you. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Opera
Hi! I use Opera 12.12. I use KDE 4 and Fluxbox. In operaprefs.ini I have [File Selector] Dialog Toolkit=4 which help me that Opera works othervise I get: libpng error: incorrect data check libpng error: incorrect data check Segmentation fault (core dumped) This happened on KDE but without above lines in operaprefs.ini, Opera works without problem on Fluxbox. What is different, please? Thank you. Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: KDE Mouse Themes
On Sunday 27 January 2013 07:26:59 Carmel wrote: I have KDE version 4.8.4 (4.8.4) installed on a FreeBSD-8.3 system. I have tried reading through the KDE documentation; however, I cannot find the setting on my system to change the mouse theme(s). According to the KDE documentation, the settings tab that should exist under settings does not. Is there some special package I have to install to get this ability? I cannot seem to find anything that specifically relates to this problem in the ports tree. I can do this so easily in an MS Windows environment, yet now I am just wasting time trying to do something that should be simple and intuitive. Do you have: System Settings - Input Devices - and there are Keyboard, Mouse and Remote control. -- Mitja -- http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
freebsd-update IDS
Hi! I run freebsd-update on my upgraded FreeBSD 9.1-RELEASE and I got: /var/cache has 0755 permissions, but should have 0750 permissions I don't have a server. Should I change permission, please? Thank you. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: OT - Opera 12.12 crashes while uploading an image on Flickr
On Friday 11 January 2013 03:06:32 p...@pair.com wrote: Recently Opera -- Opera/9.80 (X11; FreeBSD 8.3-STABLE i386) Presto/2.12.388 Version/12.12 -- has been crashing whenever I try to upload an image in JPEG format ... http://farm9.staticflickr.com/8364/8369048901_d47c385819_b_d.jpg ( opened raw file in ufraw 0.18_4; sent to gimp 2.6.12,2; resized saved as JPEG. I uploaded it via Firefox 10.0.11,1 without any problems. ) ... on Flickr via ... http://www.flickr.com/photos/upload/basic/?reason=noflash ... Opera crashes during the transfer (after file has been chosen by pressing Choose ... and pressing UPLOAD). Could anybody tell me if the problem is with Opera-Flickr interaction or something inherent in the file itself? (Also posted to newsgroup opera.linux.) - parv -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org IMO is problem with Opera java or flash because I have a problem to upload files with Opera on redbubble. I use xombrero and it works. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
clang
I had FreeBSD 9.0-RELEASE which was updated with freebsd-update upgrade to RC-3 and RC3 with freebsd-update to 9.1 release: FreeBSD 9.1-RELEASE #0 r243826: Tue Dec 4 06:55:39 UTC 2012 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 Almost 90% of ports I built with clang and in etc/make.conf I have: CC=clang CXX=clang++ CPP=clang-cpp But when I ran clang --version I got: FreeBSD clang version 3.1 (branches/release_31 156863) 20120523 Target: i386-unknown-freebsd9.0 Thread model: posix Is it normal, please? With update of FreeBSD from 9.0 to RC3 and to Release I din't have any problem Thank you. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: working SIP phone for FreeBSD?
On Friday 28 December 2012 03:44:08 Matthias Apitz wrote: El día Friday, December 28, 2012 a las 09:58:41AM +0100, Matthias Apitz escribió: Hi Tzanetos, I've used your port and installed Jitsi on my laptop; thanks; do you know why the account window on my sreen (1024x600) looks so ugly: http://www.unixarea.de/jitsi.jpg it registers fine to my Yahoo account and I will try SIP later on. and I could not make jitsi using /dev/video0 of webcamd (which works fine in Skype and other apps); any idea? matthias I installed jitsti too and registered to XMPP, ippi and iptel. With XMPP (Jabber) and ippi I can connect but on iptel.org I am not succesful with conection. I don't have a camera and I didn't try to talk with anyone because all frinds have Skype. I don't know how sound works because in settings I have just java sound option. I use jitsi on FreeBSD 9.1-Release and KDE 4.8.4. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
pkgng
My system: FreeBSD 9.1-RC3 #0 r242324: Tue Oct 30 00:18:27 UTC 2012 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 I installed new pkg, I have WITH_PKGNG=yes in /etc/make.conf, I ran pkg2ng and I use portmaster. I turned ON SHLIBS=YES in pkg.conf and pkg_check -Ba show: pkg check -Ba pkg: (fltk-1.3.2) shared library libfltk_images.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk_forms.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (fltk-1.3.2) shared library libfltk.so.1.3 not found pkg: (htmldoc-1.8.27_7) shared library libfltk_images.so.1.3 not found pkg: (htmldoc-1.8.27_7) shared library libfltk.so.1.3 not found pkg: (hugin-2011.4.0_3) shared library libhuginbasewx.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbasewx.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbasewx.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginlines.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libceleste.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library liblocalfeatures.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libceleste.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbasewx.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libceleste.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libicpfindlib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbasewx.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginbase.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libhuginvigraimpex.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libmakefilelib.so.0.0 not found pkg: (hugin-2011.4.0_3) shared library libicpfindlib.so.0.0 not
Re: When Is The Ports Tree Going To Be Updated?
On Sunday 25 November 2012 17:30:15 Tim Daneliuk wrote: On 11/25/2012 05:25 PM, Matthew Seaman wrote: On 25/11/2012 23:10, Tim Daneliuk wrote: After the recent security scare, I know the ports tree was temporarily frozen. Does anyone know when it will again be updates. I just upgraded to 9.1-PRE and need to rebuild Firefox Thunderbird against the new libraries and ... they're broken, marked as security hazards... It's been being updated normally since near enough a week ago. Normally means subject to the pre-9.1-RELEASE restrictions on sweeping changes as is usual at this point in a release cycle. FireFox 17 and Thunderbird 17 updates were committed to ports on 20th November. Cheers, Matthew Hmmm, something is amiss: [root] ~portsnap update Ports tree is already up to date. [root] ~cd /usr/ports/www/firefox [root] /usr/ports/www/firefoxmake === firefox-16.0.2,1 has known vulnerabilities: Affected package: firefox-16.0.2,1 Type of problem: mozilla -- multiple vulnerabilities. Reference: http://portaudit.FreeBSD.org/d23119df-335d-11e2-b64c-c8600054b392.html = Please update your ports tree and try again. *** [check-vulnerable] Error code 1 Stop in /usr1/ports/www/firefox. ** [build] Error code 1 Stop in /usr1/ports/www/firefox. I use portsnap fetch update and it works... Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
skype
When using Skype on FreeBSD (.1-RC3, the call often (every 1-5 minutes) gets disconnected or better I hear but the other side doesn't hear me If I remember correct kern.hz=100 in loader.conf solved this problem before I I had this line but it doesn't help me. I have Skype-2.1.0.81 installed. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: skype
On Sunday 18 November 2012 12:57:14 Matthias Apitz wrote: El día Sunday, November 18, 2012 a las 12:45:54PM -0600, ajtiM escribió: When using Skype on FreeBSD (.1-RC3, the call often (every 1-5 minutes) gets disconnected or better I hear but the other side doesn't hear me If I remember correct kern.hz=100 in loader.conf solved this problem before I I had this line but it doesn't help me. I have Skype-2.1.0.81 installed. I know that this does not help much, but I'm using the same Sk in 10-CURRENT very often (also with video), and do not face this problem. Are yo sure that this is caused by FreeBSD or at your end of the call at all? matthias I am sure that is a problem on my side. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: portsnap
On Wednesday 14 November 2012 00:37:47 Elias Chrysocheris wrote: Yeap. Same here: pluto# portsnap fetch update Looking up portsnap.FreeBSD.org mirrors... 6 mirrors found. Fetching snapshot tag from ec2-eu-west-1.portsnap.freebsd.org... done. Latest snapshot on server matches what we already have. No updates needed. Ports tree is already up to date. How can it be possible? 3 years now that I use FreeBSD there was not even a single day that we didn't have updates in the ports tree. How can it be possible for two consecutive days to have No updates needed.? Something is wrong... Regards Elias We have updates but I red somewhere about problem with server. Should be nice to the users if someone sent email to mailing list about a problem. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: gfc-afc-volume-mon
On Sunday 11 November 2012 19:05:59 Shane Ambler wrote: I have been running 9.0 all year and have seen this issue but haven't gone as far as tracking down the cause of it hanging like that. I wondered if it may have an issue with zfs - I run a pure zfs system. I don't use zfs. Maybe is a bug? Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
portsnap
Hi! Is it something wrong with portsnap server or is something wrong with my system. When I run portsnap...: portsnap fetch update Looking up portsnap.FreeBSD.org mirrors... 6 mirrors found. Fetching snapshot tag from your-org.portsnap.freebsd.org... done. Latest snapshot on server matches what we already have. No updates needed. Ports tree is already up to date. but on http://www.freshports.org/ are many new ports (I like update Sage). Thanks in advance. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: portsnap
On Monday 12 November 2012 17:46:44 Aldis Berjoza wrote: 13.11.2012, 01:27, ajtiM lum...@gmail.com: Hi! Is it something wrong with portsnap server or is something wrong with my system. When I run portsnap...: portsnap fetch update Looking up portsnap.FreeBSD.org mirrors... 6 mirrors found. Fetching snapshot tag from your-org.portsnap.freebsd.org... done. Latest snapshot on server matches what we already have. No updates needed. Ports tree is already up to date. but on http://www.freshports.org/ are many new ports (I like update Sage). Thanks in advance. Mitja It takes some time for mirrors to catch up. But is it about 12 hours okay (maybe more)? Thanks. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
gfc-afc-volume-mon
Hi! I use FreeBSD 9.1-RC3 #0 r242324 mnow. After updtae from 9.1-RC2 to RC3 I have a problem with GIMP which start more slow than before and top shows me: THR PRI NICE SIZERES STATE C TIME WCPU COMMAND 3 1020 44176K 9256K CPU10 1:11 100.00% gvfs-afc-volume-mon Firefox and Inkscape wok same as before and gvfs-* doesn't show. Thank you. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
before new version
Hi! Could someone explain, please why ports should be frozen before a new version of FreeBSD came out? It happened all the time and after update (if you update or not) there are so many ports for updating. In case for very long waiting for version 9.1 will be thousands of them. Thank you very much. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: before new version
On Saturday 03 November 2012 12:18:35 Polytropon wrote: On Sat, 3 Nov 2012 11:23:12 -0500, ajtiM wrote: Hi! Could someone explain, please why ports should be frozen before a new version of FreeBSD came out? The idea is to make sure that RELEASE can be shipped with installation media (CD, DVD) for offline use which requires ports mostly to be tested and working in some specific state, and then the packages (those you can access on the installation media) are generated from them. It's handy for systems that do not have Internet access to install software off-line. It happened all the time and after update (if you update or not) there are so many ports for updating. In case for very long waiting for version 9.1 will be thousands of them. That could probably be. Most users who have Internet access and run servers (and also home systems) will tend to update the OS beyond RELEASE and also do so with the ports collection, or alternatively also use pkg_add -r from the Latest/ directory instead of RELEASE (which _always_ contains the ports generated from the frozen ports tree). Thank you very much. BTW: packages are almost all the time outdated. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: before new version
On Saturday 03 November 2012 14:11:22 you wrote: BTW: packages are almost all the time outdated. The packages in the RELEASE directory and on the installation media meet the frozen ports tree (frozen _prior_ to the release date), so yes, they are a bit outdated, but they are considered mostly stable and usable when in use with what is distributed. On the server, both _those_ packages _and_ those in Latest/ (which are periodically built from the advancing ports tree after the release date) are often considered not _that_ current as if you would use CVS or SVN to obtain the bleeding edge latest ports tree and build from source. I didn't complain about bleeding edge sofware which we anywhere don't have (Gimp, Xorg, LibreOffice and all dependencies for those applications and more and more which I don't use and I don't need) but I complain about freezing ports too early before new release came out and after that rebuilt 5000 ports for example just because png new version is coming out. Or am I wrong? So yes, you could say what you said. :-) Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: graphics card
On Tuesday 23 October 2012 01:34:33 Polytropon wrote: On Mon, 22 Oct 2012 15:56:56 -0500, ajtiM wrote: Hi! There are several options for X you can tweak, and the native ati driver is excellent for the older ATI models. Make sure you have DRM/DRI working, and check for GL support (glxinfo, glxgears, xvinfo; install xlockmore and see xlock -nolock -mode fire). I had this computer about 12 years and it works very good still. I didn't have problem with slow Krita before but now is not the same. IMO all graphics programs are more hungry for better gr. cards but GIM works still very good. I have ati native drivers, I have dr/drm installed but I don't use xorg.conf and it works. I ran glxgears -info in the small size windows and I got: glxgears -info GL_RENDERER = Mesa DRI R200 (RV250 4966) 20090101 AGP 4x x86/MMX/SSE2 TCL GL_VERSION= 1.3 Mesa 7.6.1 GL_VENDOR = Tungsten Graphics, Inc. GL_EXTENSIONS = GL_ARB_draw_buffers GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_logic_op GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_APPLE_packed_pixels GL_ATI_blend_equation_separate GL_ATI_texture_env_combine3 GL_ATI_texture_mirror_once GL_ATI_fragment_shader GL_IBM_multimode_draw_arrays GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_INGR_blend_func_separate GL_MESA_pack_invert GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays 9632 frames in 5.0 seconds = 1926.316 FPS 10262 frames in 5.0 seconds = 2052.362 FPS 10254 frames in 5.0 seconds = 2050.631 FPS 10262 frames in 5.0 seconds = 2052.296 FPS 10262 frames in 5.0 seconds = 2052.253 FPS 10262 frames in 5.0 seconds = 2052.279 FPS 10261 frames in 5.0 seconds = 2052.143 FPS 10262 frames in 5.0 seconds = 2052.282 FPS 10260 frames in 5.0 seconds = 2051.818 FPS 10261 frames in 5.0 seconds = 2052.118 FPS glxgears -fullscreen I got: glxgears -fullscreen 1453 frames in 5.0 seconds = 290.501 FPS 1490 frames in 5.0 seconds = 297.973 FPS 1490 frames in 5.0 seconds = 297.976 FPS 1490 frames in 5.0 seconds = 297.981 FPS 1490 frames in 5.0 seconds = 297.975 FPS 1490 frames in 5.0 seconds = 297.981 FPS 1490 frames in 5.0 seconds = 297.990 FPS 1490 frames in 5.0 seconds = 297.989 FPS 1490 frames in 5.0 seconds = 297.985 FPS 1490 frames in 5.0 seconds = 297.982 FPS 1490 frames in 5.0 seconds = 297.989 FPS 1490 frames in 5.0 seconds = 297.913 FPS glxinfo shows: name of display: :0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe, GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_MESA_copy_sub_buffer client glx vendor string: Mesa Project and SGI client glx version string: 1.4 client glx extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap GLX version: 1.2 GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory
graphics card
Hi! I have an old computer but it works good still :). I use KDE and GIMP and I like to use Krita more but a problem is graphics card and it is slow (Gimp is okay). I have ASUS P4P800 mother board and ATI Radeon 9000 AGP graphics card. I look for some Nvidia AGP cards (opengl 2.0) but the problem is because my motherboard AGP supports +1.5V only. Which gr. card would be better than my but I could use on my motherboard, please? Thank in advance, Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
license
Again me Last time I try to make some T-shirts which I have on my redbubble page. It is not a big nmoney, I didn't sell anything just one card :) but I like to make a T-shirt design with Beastie on it too. Do I need a permission for using Beastie or it is free or I cannot use. Thank you. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: graphics card
On Monday 22 October 2012 16:09:22 Gardner Bell wrote: On 22/10/2012 4:56 PM, ajtiM wrote: Hi! I have an old computer but it works good still :). I use KDE and GIMP and I like to use Krita more but a problem is graphics card and it is slow (Gimp is okay). I have ASUS P4P800 mother board and ATI Radeon 9000 AGP graphics card. I look for some Nvidia AGP cards (opengl 2.0) but the problem is because my motherboard AGP supports +1.5V only. Which gr. card would be better than my but I could use on my motherboard, please? Thank in advance, Mitja http://www.redbubble.com/people/lumiwa Maybe the Radeon HD 4670 would be a good card for you to look at. Looks good. I will need a power supply too (400W or 500W) but price is not bad. Mitja http://www.redbubble.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: FreeBSD 9.1 RC2
On Wednesday 10 October 2012 04:18:55 andrew clarke wrote: On Tue 2012-10-09 15:54:23 UTC-0500, ajtiM (lum...@gmail.com) wrote: I saw that is no more iso for FreeBSD RC1. Now is for RC2. Is it possible or better safe to use freebsd-update to update 9.1 RC1 to RC2, please? You can use freebsd-update upgrade -r 9.1-RC2. Safe? You probably wouldn't want to use it on a production server. I did it on my home computer and it was fast and it works. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
FreeBSD 9.1 RC2
Hi! I saw that is no more iso for FreeBSD RC1. Now is for RC2. Is it possible or better safe to use freebsd-update to update 9.1 RC1 to RC2, please? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
sockstat
Hi! I have FreeBSD 9.1-RC1 #0 and I running KDE 4.8.4 too. If I run KDE and try sockstat -l46 I get: sockstat -l46 USER COMMANDPID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS ajtimknemo 35725 10 udp4 *:* *:* root Xorg 33842 1 tcp6 *:6000*:* root Xorg 33842 3 tcp4 *:6000*:* Is it normal root Xorg... I am running Xorg (kde) as user. Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: sockstat
On Tuesday 02 October 2012 05:50:57 Steve O'Hara-Smith wrote: On Tue, 2 Oct 2012 05:42:51 -0500 ajtiM lum...@gmail.com wrote: Hi! I have FreeBSD 9.1-RC1 #0 and I running KDE 4.8.4 too. If I run KDE and try sockstat -l46 I get: sockstat -l46 USER COMMANDPID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS ajtimknemo 35725 10 udp4 *:* *:* root Xorg 33842 1 tcp6 *:6000*:* root Xorg 33842 3 tcp4 *:6000*:* Is it normal root Xorg... I am running Xorg (kde) as user. Yes, the X server needs device access not available to normal users so it run setuid root. Thank you. I have no in /usr/local/bin/startx clientargs=-nolisten tcp serverargs=-nolisten tcp and is okay. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: sockstat
On Tuesday 02 October 2012 17:02:47 Steve O'Hara-Smith wrote: On Tue, 2 Oct 2012 16:26:59 -0500 ajtiM lum...@gmail.com wrote: On Tuesday 02 October 2012 05:50:57 Steve O'Hara-Smith wrote: On Tue, 2 Oct 2012 05:42:51 -0500 ajtiM lum...@gmail.com wrote: Hi! I have FreeBSD 9.1-RC1 #0 and I running KDE 4.8.4 too. If I run KDE and try sockstat -l46 I get: sockstat -l46 USER COMMANDPID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS ajtimknemo 35725 10 udp4 *:* *:* root Xorg 33842 1 tcp6 *:6000*:* root Xorg 33842 3 tcp4 *:6000*:* Is it normal root Xorg... I am running Xorg (kde) as user. Yes, the X server needs device access not available to normal users so it run setuid root. Thank you. I have no in /usr/local/bin/startx clientargs=-nolisten tcp You don't need this in clientargs, serverargs is the right place. It should be harmless though, I think. serverargs=-nolisten tcp and is okay. That serverargs should prevent those sockets being used, so no not OK if the sockets are still open. In general though it's best to pass these to startx (perhaps from another script) rather than editing it, your changes will get lost next time startx gets updated. Done. Thank you. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: libxul
On Saturday 18 August 2012 21:16:09 Antonio Olivares wrote: On Sat, Aug 18, 2012 at 6:25 PM, ajtiM lum...@gmail.com wrote: Hi! There are vulnerabilities in libxul-1.9.2 very long time and looks like nothing is better. Are there a new libxul version somewhere to download, please? portaudit -Fda auditfile.tbz 100% of 79 kB 316 kBps New database installed. Database created: Sat Aug 18 18:15:04 CDT 2012 Affected package: libxul-1.9.2.28_1 Type of problem: mozilla -- multiple vulnerabilities. Reference: http://portaudit.FreeBSD.org/dbf338d0-dce5-11e1- b655-14dae9ebcf89.html Affected package: libxul-1.9.2.28_1 Type of problem: mozilla -- multiple vulnerabilities. Reference: http://portaudit.FreeBSD.org/bfecf7c1- af47-11e1-9580-4061862b8c22.html Affected package: libxul-1.9.2.28_1 Type of problem: mozilla -- multiple vulnerabilities. Reference: http://portaudit.FreeBSD.org/380e8c56-8e32-11e1-9580-4061862b8c22.html 3 problem(s) in your installed packages found. You are advised to update or deinstall the affected package(s) immediately. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org I was wanting to ask this question for a long time, but you have beaten me to it :) I was going to ask specifically if firefox does depend on libxul that it is necessary? Otherwise, why do we have to see this every time we update our ports? I have seen that there's a configuration option for libxul so that it can install, but using portmaster the option is not the same or not present? Anyone want to take a shot at explaining this never ending libxul-* saga? Regards, Antonio I think Firefox doesn't depend but I installled VLC player and VLC Mozilla plugins needs libxul. I used beforeMplayer and Gecko plgins which need libxul too and because that I switched to VLC because I thought that I am free of libxul but no. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
libxul
Hi! There are vulnerabilities in libxul-1.9.2 very long time and looks like nothing is better. Are there a new libxul version somewhere to download, please? portaudit -Fda auditfile.tbz 100% of 79 kB 316 kBps New database installed. Database created: Sat Aug 18 18:15:04 CDT 2012 Affected package: libxul-1.9.2.28_1 Type of problem: mozilla -- multiple vulnerabilities. Reference: http://portaudit.FreeBSD.org/dbf338d0-dce5-11e1- b655-14dae9ebcf89.html Affected package: libxul-1.9.2.28_1 Type of problem: mozilla -- multiple vulnerabilities. Reference: http://portaudit.FreeBSD.org/bfecf7c1- af47-11e1-9580-4061862b8c22.html Affected package: libxul-1.9.2.28_1 Type of problem: mozilla -- multiple vulnerabilities. Reference: http://portaudit.FreeBSD.org/380e8c56-8e32-11e1-9580-4061862b8c22.html 3 problem(s) in your installed packages found. You are advised to update or deinstall the affected package(s) immediately. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Flash in Firefox
On Tuesday 31 July 2012 00:42:42 Jeff Tipton wrote: On 07/31/2012 05:18, Polytropon wrote: On Mon, 30 Jul 2012 14:55:46 -0600 (MDT), Warren Block wrote: On Tue, 31 Jul 2012, Manish Jain wrote: Okay, so can you please go to the URL below and see whether the bubbles work for you ? http://news.discovery.com/human/games-lumosity-word-bubbles.html [...] Works here. amd64, firefox-14.0.1,1 linux-f10-flashplugin-11.2r202.236_1 Set up as the Handbook describes. Also works here, FreeBSD/i386 8.2-STABLE of August 2011, setup according to the Handbook, with the difference that I'm using Opera here with the following ports: opera-11.50 opera-linuxplugins-11.50 linux-f10-flashplugin-10.3r183.5 And it works here. chromium-15.0.874.121 OR midori-0.4.2 linux-f10-flashplugin-11.1r102.55 Setup as per Handbook. I also have IcedTea-Web Plugin (using IcedTea-Web 1.1.4) (for Java applets, also following setup according to Handbook) but I don't think it makes difference here. -Jeff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org Works on Opera here too but after updtae Firefox to 14.0.1 doesn't work on Firefox. Ans as I red on Linux forums they have a problem with Firefox 14.0.1 too. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Flash in Firefox
On Tuesday 31 July 2012 11:44:32 Jerry wrote: On Tue, 31 Jul 2012 05:20:13 -0500 ajtiM articulated: Works on Opera here too but after updtae Firefox to 14.0.1 doesn't work on Firefox. Ans as I red on Linux forums they have a problem with Firefox 14.0.1 too. This one is not working with Firefox 14.0.1 either. http://www.huffingtonpost.com/2012/07/26/jon-stewart-you-didnt-build-that_n _1705264.html?ir=Politicsncid=edlinkusaolp0009utm_hp_ref=fbsrc=spco mm_ref=false#sb=3507831,b=facebook He is good. It works works on Firefox 14.0.1 now. What I did was again run nspluginwrapper -v -a -i and it works. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Flash in Firefox
On Monday 30 July 2012 15:55:46 Warren Block wrote: On Tue, 31 Jul 2012, Manish Jain wrote: I've not experienced any problem with sites that use Flash, including Youtube. Okay, so can you please go to the URL below and see whether the bubbles work for you ? http://news.discovery.com/human/games-lumosity-word-bubbles.html I don't have a problem with YouTube either. But if the flash at the URL above works for you, I request you to kindly share with me the ports I need to install. I spent a lot of time, energy and bandwidth installing/reinstalling over a dozen ports, including opera. But neither opera nor firefox on my system work for the subject URL Works here. amd64, firefox-14.0.1,1 linux-f10-flashplugin-11.2r202.236_1 Set up as the Handbook describes. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org It doesn't work on my computer: FreeBSD 9.0 Release, KDE 4.8.4 I updated Firefox 13 to 14.0.1 and flash doesn't work anymore (on Opera works). In pluginred.dat I have: [INVALID] /usr/local/lib/npapi/linux-f10-flashplugin/libflashplayer.so:$ 1336714805000:$ On the previous version of Firefox I didn't have a problem with the same version of flash plugin. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Flash in Firefox
On Monday 30 July 2012 16:49:09 Warren Block wrote: On Mon, 30 Jul 2012, ajtiM wrote: It doesn't work on my computer: FreeBSD 9.0 Release, KDE 4.8.4 I updated Firefox 13 to 14.0.1 and flash doesn't work anymore (on Opera works). In pluginred.dat I have: [INVALID] /usr/local/lib/npapi/linux-f10-flashplugin/libflashplayer.so:$ 1336714805000:$ On the previous version of Firefox I didn't have a problem with the same version of flash plugin. Is that linux-f10-flashplugin10 or linux-f10-flashplugin11? It is linuxf10-flashplugin11 Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
router
Hi! I have a printer connected through router which works. But the last two days I found three printed papers: two are empty and on the one is: GET http://www.rackspace.com/ HTTP/1.1 Host: www.rackspace.com User-Agent: Mozilla/4.0 (compatible, MSIE 6.0: Windows NT 5.1) Axxept: */* Accept-Language: zh-cn Connection: Keep-Alive and on the other one was: GET http://proxyjudge1.proxyfire.net/fastenv HTTP/1.1 Host: proxyjudge1.proxyfire.net and the other four lines are the same. And the other problem is that I have in the router logs IP 184.58.138.79. Thank you very much. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
llvm/clang 3.1
Hi! Today was upadate for llvm and clang 3.1. My system is FreeBSD 9.0-RELEASE-p3. I update the system with pormaster and llvm was updated to 3.1 but clang shows clang version 3.0 (branches/release_30 142614) 20111021 I installed lang/clang which is 3.1 and I have it in /usr/local/bin: clang version 3.1 (branches/release_31) Target: i386-portbld-freebsd9.0 In /etc/make.conf I have: CC=clang CXX=clang++ CPP=clang-cpp Today I try to build with /usr/local/bin/clang which is 3.1 and it works for graphics/opengtl but it didn't work for multimedia/cuse4bsd-kmod 0.1.24 and than I change back as I wrote above in make.conf and everythink works and I rebuilt opengtl whith clang 3.0 and it works. Is it important just update llvm to 3.1 on FreeBSD 9.0 Rel;ease, please? Do I need to pkg_delete lang/clang? Thank in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Building libreoffice on 8.3 x86-64, not
On Friday 22 June 2012 16:43:06 John Levine wrote: I have an 8.3 x86-64 system, fully patched, all ports but one up to date. When I try to build libreoffice, it fails in various sub-builds. Most of the sub-builds work when I retry them, except for tail_build which fails repeatedly. It's using clang for the build, but I don't see any option to use GCC. Any suggestions? I have 500 megabytes of build logs if anyone wants to look at them. R's, John ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org It doesn't build with clan and nothing better is with gcc. Next version should be okay. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: FreeBSD ports patch count
On Friday 01 June 2012 04:25:12 Matthew Seaman wrote: On 01/06/2012 09:34, Damien Fleuriot wrote: On 6/1/12 9:49 AM, Brent Clark wrote: Hiya I would just like to ask / know. Did anything weird or wonderful happen on the FreeBSD ports. To show you what I mean. [root@torry /usr/home/bclark]# portaudit -F -a; portsnap fetch update; pkg_version -vIL=; freebsd-update fetch install auditfile.tbz 100% of 77 kB 6570 Bps 00m00s New database installed. 0 problem(s) in your installed packages found. Looking up portsnap.FreeBSD.org mirrors... 9 mirrors found. Fetching snapshot tag from geodns-1.portsnap.freebsd.org... done. Fetching snapshot metadata... done. Updating from Thu May 31 19:58:31 SAST 2012 to Fri Jun 1 08:51:05 SAST 2012. Fetching 4 metadata patches... done. Applying metadata patches... done. Fetching 0 metadata files... done. Fetching 4180 patches.10203040 4180 patches really !!! I run the above command almost everyday, so the most I have ever really seen is 300 - 400 patches. But 4180 has got me attention. Thanks Brent I may be mistaken but I would guess it has to do with the vulnerabilities addressed in OpenSSL in the 30/05/2012 update. I'm assuming authors have bumped their ports' revision numbers to force a rebuild, using the patched openssl lib. There might be a little of that, but most of the recent activity is accounted for by * Numerous ports moving to the new OPTIONSng framework * Hundreds of PORTREVISION bumps after an update to graphics/png * Removal of old koffice ports and the import of the Calligra office suite to replace it. Cheers, Matthew My system is FreeBSD 9.0 Release and the lst time I use Clang. It works very good but the lst problem was with Calligra which didn't built. As I red in /usr/ports/UPDATING I ran portmaster -r png- and there are so many ports which should be rebuild. My question is: Is it better (safer) to use gcc or try clang? Or is it better to not update png? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
why I am upset
Why I am upset but not just me? I am running KDE 4.8 from January on my Linux computer. Now is almost June and we got KDE 4.8 on FreeBSD too. 5 months testing and it works? No. The modern OS for the desktop computer doesn;t works. O.K. OS works but installatoon of 5 months testing of KDE doesn;t. And help? Read /usr/ports/UOPDATING!! I red before I start inastallation but I am not sure if helpers did! Thank you for wasting my time. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
epson all in one
Hi! My got a new Epson WorkForce 545 which I connected through router and it works for her but... Does anyone has experience with Epson ALL IN ONE printers on FreeBSD, please? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
policy...
...of freezing ports - why? Whenever we are waiting for the new release of FreeBSD, now is 8.3, ports are frozen. There are no updates and in case of 8.3 coming release is time about three months. Could someone explain, please why is this freezing very important because soon after release came out there will be s many ports for update. On my computaer I spent about two or three days for updating and update is also on the new release. Thank you. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: policy...
On Tuesday 17 April 2012 09:43:50 Mark Felder wrote: Ports are frozen, a snapshot of the ports tree is made for use on their build boxes to make packages for the mirrors. Assuming no issues have been discovered on the build servers (broken ports that need to be fixed) it will be packaged with 8.3-RELEASE. I'm probably missing several important details, but this is the gist of it. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org Thank you very much. I just was wondering why are after the realese is out so many port to rebuilt (as I wrote for two, three days if is going realtively smooth). Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Suggestion
On Saturday 10 March 2012 17:36:53 Da Rock wrote: No system is actually truly capable of this, with the exception of the newest kid on the block Plan9. Winblows, in its current form, is the bastard love child of DOS and some black sheep cousin of Unix (twice-removed), so its not happening there either; just some sleight of hand tricks to partially achieve the result with a decrease of security to boot. IMO it is the Microsoft and CO. tactics how to eliminate concurency - Unix, Mac... They never tried to be better... Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
skype
Skype on my FreeBSD 9.0-RELEASE and KDE 4.7.4 working but after five, sometimes more or less minutes is sound dead. I need to recall again... In /etc/rc.conf I have: linux_enable=YES Thank you. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: skype
On Sunday 19 February 2012 08:20:43 ajtiM wrote: Skype on my FreeBSD 9.0-RELEASE and KDE 4.7.4 working but after five, sometimes more or less minutes is sound dead. I need to recall again... In /etc/rc.conf I have: linux_enable=YES Thank you. Mitja http://jpgmag.com/people/lumiwa kern.hz=100 in /boot/loader.conf solved a problem. Thanks. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Problems with libz since libz.so.5 is gone...
On Thursday 26 January 2012 16:40:59 Dan Nelson wrote: In the last episode (Jan 26), Pierre-Luc Drouin said: so various ports, in particular the java ports, are giving me headaches since /lib/libz.so.5 was replaced by /lib/libz.so.6. I managed to update most of my ports, but the binary java ports, such as diablo-jdk16, are now installing broken binary files. Even if I put an entry such as libz.so.4 libz.so.6 in /etc/libmap.conf libmap (or symlinking) only works for libraries that have a compatible ABI. The version number of libz was bumped precisely because the ABI changed :) Install the misc/compat8x port to get libz.so.5 back until you can replace diablo-jdk16 with openjdk6. I did install openjdk6 with portmaster -o and I have two problems still (I did reinstall Opera and LibreOffice) Opera misses libz.so.5 (I didn't install yet compat-8x) and LibreOffice misses libjawt.so which is in /usr/local/openjdk6/jre/lib/i386/libjawt.so Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
kernel generic options
Hi! My system: FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 Because pkg_libchk show that Opera 11.60 misses libz.so.5 I want to install /misc/compat8x as one user suggested me but generic kernel optins are: # $FreeBSD: release/9.0.0/sys/i386/conf/GENERIC 227305 2011-11-07 13:40:54Z marius $ ... ... options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 ''' ''' O.K. I will rebuild a kernel but my question is why is not options for FreeBSD 8 as default, please? Thanks. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
libjawt.so and libz.so.5
Hi! I ran pkg_libchk on FreeBSD 9.0-RELEASE #0 and I got: libreoffice-3.4.5: /usr/local/lib/libreoffice/basis3.4/program/libofficebean.so misses libjawt.so I did check and I have /usr/local/openjdk6/jre/lib/i386/libjawt.so I had installed diableo which I deinstalled and install openjdk6. I reinstall libreoofice after that but before with diablo-jdk16 I had the same message. The other one is with Opera-11-60: /usr/local/lib/opera/liboperagtk2.so misses libz.so.5 I have on the system ;ibz.so.6 Thanks. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: libjawt.so and libz.so.5
On Friday 20 January 2012 13:41:25 Polytropon wrote: On Fri, 20 Jan 2012 13:21:38 -0600, ajtiM wrote: The other one is with Opera-11-60: /usr/local/lib/opera/liboperagtk2.so misses libz.so.5 I have on the system ;ibz.so.6 I think you need to reinstall Opera so it will be linked against the current version libz.so.6. Maybe you have left out an important step when upgrading from v8 to v9. See /usr/src/Makefile's comment header: [...] 7. `make installworld' 8. `make delete-old' 9. `mergemaster'(you may wish to use -i, along with -U or -F). 10. `reboot' 11. `make delete-old-libs' (in case no 3rd party program uses them anymore) Steps 8 and 11 are important here. In case you've not removed the libs from v8, Opera still seems to link against them even though the version does not match anymore. Make sure you have performed the upgrading steps properly before rebuilding Opera. This is important when rebuilding installed applications after system upgrade (unless you have installed the compat8x-i386-x.y.* port and _not_ installed any further applications). I didn't update version 8 to 9. I mage new install of FreeBSD 9.0-RC3 and than I use freebsd-update upgrade to FreeBSD-RELEASE. I did reinstall Opera two times and it is the same. I don't know whey LibreeOffice didn't saw that I have libjawt.so? Thanks. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
openjdk6
Hi! I have installed diablo-jdk16 and I like start using openjdk6. Is it okay if I run: portmaster -o java/openjdk6 java/diablo-jdk16 Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: dot snap folder
On Sunday 15 January 2012 23:54:52 Chip Camden wrote: Quoth Polytropon on Monday, 16 January 2012: On Sun, 15 Jan 2012 15:40:20 -0800, Jim Pazarena wrote: Is it permissible to delete the dot snap folder which is created in a filesystem? First of all, it's called a directory, not a folder. :-) After all, it doesn't fold (for that you need a little Haskell or OCaml). ...and the answer if is it permissible to delete .snap directory is?? Thank you. There is also .config directory which is made by QT or something of KDE 4 which is possible to delete but it is recreated each time after kde 4 started. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
graphics tablets
Hi! I like to buy a Wacom Bamboo Capture graphics tablet (USB or serial if I will find it. I have FreeBSD 9.0-RELEASE and I use GIMP and Inkscape on KDE 4.7.3. Does anyone has expirience with a Bamboo Capture, please? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: .config
On Monday 19 December 2011 12:43:42 Polytropon wrote: On Mon, 19 Dec 2011 10:48:23 -0500, ill...@gmail.com wrote: On 30 November 2011 14:03, Polytropon free...@edvax.de wrote: On Wed, 30 Nov 2011 13:40:19 -0500, ill...@gmail.com wrote: A dirty workaround might be to link /.config to something innocuous. One could obvio- usly also have /.config mounted as a tmpfs(5). So it couldn't persist from boot to boot. The cleanest solution is to forgo qt/kde, but then you're slightly more limited in what you can use for office-type stuff. The question remains: How is a user-started process (e. g. when you run the startx command) supposed to create directory entries and files on root level /, a thing that only root and root-like users (and programs!) should be allowed to? % mkdir /.config mkdir: /.config: Permission denied As a normal user, you _intendedly_ can't do this. Why would you assume that a program you start can do it? I don't have any QT/KDE stuff but isn't kdm suid ( owned by root)? That could be the reason: kdm, belonging to the KDE world and quite probably using Qt, running with the permissions to access /. You could temporarily try to disable kdm and replace it by xdm, or no display login manager at all. In that case, /.config shouldn't appear anymore. I don't know because I don't use kdm and I don't see that kdm running. I have ksplah but not kdm and I have or re-create directory if I deleted in: / /root and in the user directory which should be. And it is happened when I start kde with 'startx as user and .config isd recreated evrywhere.. In .xinitrc I have just: PATH=/usr/local/kde4/bin:$PATH export PATH startkde Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: blender - python32
On Sunday 11 December 2011 12:31:07 Roland Smith wrote: On Fri, Dec 09, 2011 at 05:35:17PM -0600, ajtiM wrote: H! I have fresh installed 9.0-RC3 FreeBSD 9.0-RC3 #0 and I use KDE 4. I like to install Blender 2.6 but: Required To Build: lang/python32 Required To Run: lang/python32 Installed Python on the system is 2.7. I don't like to update on 32 because some problems (py27-numpy for example). Is it possible to run both versions and don't have problems, please? You can run them side-by-side without problems. And the current numpy whould work with 3.2 as well, although I haven't tried that yet. Roland Thank you very muh. I will give a try. I was not sure with numpy because it needs pythn 2.7 tou build and run as I red on freshports. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
blender - python32
H! I have fresh installed 9.0-RC3 FreeBSD 9.0-RC3 #0 and I use KDE 4. I like to install Blender 2.6 but: Required To Build: lang/python32 Required To Run: lang/python32 Installed Python on the system is 2.7. I don't like to update on 32 because some problems (py27-numpy for example). Is it possible to run both versions and don't have problems, please? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
search path
Hi! On my new installed 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 12 18:09:11 UTC 2011 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 and KDE 4.7.3 I installed with make install krecipes-kde4 and because I didn't like it I deinstall with make deinstall which I did many times before on FreeBSD 8.2 with KDE 4.7.2. Deinstallation looks like works but I got also: /usr/local/kde4/share is not in the search path of XDG_DATA_STORAGE and XDG_DATA_DIRS. I never had this before. Thanks in advance... Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
kvm_getenw
Hi! I had the same problem on FreeBSD 8.2 Release as I have now on 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 12 18:09:11 UTC 2011 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386: console-kit-daemon[1800]: WARNING: kvm_getenvv failed: cannot open /proc /84597/mem In /etc/fstab I have a line: # Device Mountpoint FStype Options Dump Pass # - -- --- --- - linproc /compat/linux/proc linprocfsrw 00 and in /etc/rc.conf is linux_enable=YES mount shows: linprocfs on /compat/linux/proc (linprocfs, local) I use KDE4 not GNOME. How is possiblle to correct the problem, please? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
.config
Hi! I succesfully installed FreeBSD 9.0 RC-2 and I didn't have problems with bsdinstall and others. What I didn't have on 8.2 is when I start KDE4 with startx I got directory .config in /. I have one .config in /home but what it happened? When I deleted as root and I start again KDE4 as user I got it again. Inside is a file Trolltech.conf (the same is in /home/.config). Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: .config
On Wednesday 23 November 2011 05:46:33 Polytropon wrote: On Wed, 23 Nov 2011 05:39:21 -0600, ajtiM wrote: Hi! I succesfully installed FreeBSD 9.0 RC-2 and I didn't have problems with bsdinstall and others. What I didn't have on 8.2 is when I start KDE4 with startx I got directory .config in /. I have one .config in /home but what it happened? When I deleted as root and I start again KDE4 as user I got it again. Inside is a file Trolltech.conf (the same is in /home/.config). That file seems to be part of Qt. How can it be created outside your $HOME when you startx? That's somewhat strange... how _can_ that happen? % cd % touch ../bla touch: ../bla: Permission denied % touch /bla touch: /bla: Permission denied Only root permissions allow the creation of files in that specific directories. Neither /.config or /home/.config should exist. It shoud be ~/.config for your user account. I also have ~/.config/Trolltech.conf. I'm not using KDE, but one KDE program, maybe other Qt-based programs. Maybe one of them has installed the directory (at this correct location)? % ls .config/ Trolltech.conf audacious/ autostart/ gsmartcontrol/ gtk-2.0/ menus/ Okay, seems that other toolkits also use it. :-) I don't know how this happened but I have it start all the time when I startx. Troltech.conf: [Qt%20Plugin%20Cache%204.7.false] usr\local\kde4\lib\kde4\plugins\kauth\backend\kauth_backend_plugin.so=40704, 0, i386 usr/local/share/qt4/mkspecs/freebsd g++-4 full-config, 201 1-11-20T16:14:25 usr\local\kde4\lib\kde4\plugins\kauth\helper\kauth_helper_plugin.so=40704, 0, i386 usr/local/share/qt4/mkspecs/freebsd g++-4 full-config, 2011- 11-20T16:14:25 Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: .config
On Wednesday 23 November 2011 07:31:07 ajtiM wrote: On Wednesday 23 November 2011 05:46:33 Polytropon wrote: On Wed, 23 Nov 2011 05:39:21 -0600, ajtiM wrote: Hi! I succesfully installed FreeBSD 9.0 RC-2 and I didn't have problems with bsdinstall and others. What I didn't have on 8.2 is when I start KDE4 with startx I got directory .config in /. I have one .config in /home but what it happened? When I deleted as root and I start again KDE4 as user I got it again. Inside is a file Trolltech.conf (the same is in /home/.config). That file seems to be part of Qt. How can it be created outside your $HOME when you startx? That's somewhat strange... how _can_ that happen? % cd % touch ../bla touch: ../bla: Permission denied % touch /bla touch: /bla: Permission denied Only root permissions allow the creation of files in that specific directories. Neither /.config or /home/.config should exist. It shoud be ~/.config for your user account. I also have ~/.config/Trolltech.conf. I'm not using KDE, but one KDE program, maybe other Qt-based programs. Maybe one of them has installed the directory (at this correct location)? % ls .config/ Trolltech.conf audacious/ autostart/ gsmartcontrol/ gtk-2.0/ menus/ Okay, seems that other toolkits also use it. :-) I don't know how this happened but I have it start all the time when I startx. Troltech.conf: [Qt%20Plugin%20Cache%204.7.false] usr\local\kde4\lib\kde4\plugins\kauth\backend\kauth_backend_plugin.so=40704 , 0, i386 usr/local/share/qt4/mkspecs/freebsd g++-4 full-config, 201 1-11-20T16:14:25 usr\local\kde4\lib\kde4\plugins\kauth\helper\kauth_helper_plugin.so=40704, 0, i386 usr/local/share/qt4/mkspecs/freebsd g++-4 full-config, 2011- 11-20T16:14:25 Mitja http://jpgmag.com/people/lumiwa I found a link: http://forum.kde.org/viewtopic.php?f=63t=92815 Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: FreeBSD 9.0 RC-2
On Friday 18 November 2011 16:51:39 Matthew Seaman wrote: On 18/11/2011 22:24, ajtiM wrote: I had a problem with memory on y computer with 8.2 and there are some mess. I like to install fresh FreeBSD 9.0. Is it safe to install RC-2 or is better to wait to the final release, please? 9.0-RC2 is (probably) going to be very similar indeed to the eventual 9.0-RELEASE. There will be some bug fixes yet to go in, but it is unlikely these will be show-stoppers. RC2 is not unsafe and there's no reason not to install it for learning or evaluation or development purposes. I wouldn't advise using it for anything your livelihood depends on though. Plan on upgrading to -RELEASE as soon as possible if you do play with -RC2. However, you're unlikely to have a pleasant experience if you've got dodgy RAM in your machine. All bets are off if the computer cannot rely on getting the correct data back from RAM. I wouldn't even try booting up a live CD unless the memory problems have been fixed. Cheers, Matthew Thank you very much. Each school cost something ): Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
qt4-cups
I decided to install FreeBSD 9.0 RC-2. I like to have KDE4 as I have now and my question is: Do I need to have in the make.conf still QT4_OPTIONS=CUPS Thank you. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
file system on 9.0
Hi! One more question before I start installing FreeBSD 9.0 RC-2. Now we have a new bsdinstall and as I red and if I understood correct there is also SU journaling file sistem. I will switch to the GPT partion. If I want to have SU-j file system is it enough that I just choose this option and voila? And another question is about ports. There is an option ports tree which is marked default. It is okay that I use this later with portsnap? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: file system on 9.0
On Saturday 19 November 2011 06:29:40 Denise H. G. wrote: On 2011/11/19 at 20:09, ajtiM lum...@gmail.com wrote: Hi! One more question before I start installing FreeBSD 9.0 RC-2. Now we have a new bsdinstall and as I red and if I understood correct there is also SU journaling file sistem. I will switch to the GPT partion. If I want to have SU-j file system is it enough that I just choose this option and voila? Yes. I think so. 'options UFS_GJOURNAL' is present in GENERIC kernel config. If you use GENERIC kernel, it is there. And another question is about ports. There is an option ports tree which is marked default. It is okay that I use this later with portsnap? Sure. portsnap is designed to work with the ports tree. Thank you and one more, please... Partitioning: if I choose guided than I got: freebsd-boot freebsd-ufs / freebsd-swap If I press enter on freebsd-ufs / than I got options to make moe partitions. Is it okay that I make /, /var, /tmp and /usr as I have now. Thank you very much for the help. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
FreeBSD 9.0 RC-2
Hi! I had a problem with memory on y computer with 8.2 and there are some mess. I like to install fresh FreeBSD 9.0. Is it safe to install RC-2 or is better to wait to the final release, please? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: operapluginwraper
On Tuesday 08 November 2011 18:43:05 Polytropon wrote: On Tue, 8 Nov 2011 15:33:01 -0600, ajtiM wrote: I don't have /proc on my system and I don't know why I should have it? You'll need it in case you're using Linux ABI stuff, and if I remember correctly, this is required for the Opera Flash plugin. I'm using such a combination here. That's why I have # Device Mountpoint FStype Options Dump Pass # - -- --- --- - linproc /compat/linux/proc linprocfsrw 00 in /etc/fstab. This requires options COMPAT_LINUX options LINPROCFS options LINSYSFS in your kernel config, or load the corresponding kernel modules. The line linux_enable=YES in /etc/rc.conf should do that. Thank you. But as I nderstand the Opera should be FreeBSD native. I didn't installed Linux version. And I don't have flash plugin installed either. BTW I use gnash. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: console-kit daemon
On Monday 07 November 2011 18:34:16 Chuck Swiger wrote: On Nov 7, 2011, at 4:19 PM, ajtiM wrote: I ahve a problem that computer freeze when I compailing ports without error. Sometimes freeze (hard reset help) and sometimes reboot. I did ran memtest 24 hours and there were no errors, I used smartmontools for check hard drive and there are no errors but the problem is here still. Running memtest is a great diagnostic for bad memory. It's good that it passed; so this suggests thermal problems, or less likely, a marginal power supply unit which can't handle full load. prime95 / mprime has a diagnostic mode which lets you fully load up both CPU and memory resources, and might be better suited to identifying a problem if memtest didn't find anything Regards, Thank you very much. I will try because I cannot do any update...but I am not ready yet to buy a new computer. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
operapluginwraper
Hi! On my FreeBSD 8.2 Release I use KDE 4 and Opera 11.52. Everytime when I start (use) Opera I have operapluginwraper..core in the /home directory.. In the /var/log/mesages I got also: Nov 8 15:15:20 athena console-kit-daemon[1395]: WARNING: kvm_getenvv failed: cannot open /proc/4679/mem Nov 8 15:15:43 athena hp-systray: hp-systray[4753]: error: option -s not recognized Nov 8 15:15:50 athena dbus[1131]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out Nov 8 15:16:00 athena console-kit-daemon[1395]: WARNING: kvm_getenvv failed: cannot open /proc/4766/mem Nov 8 15:20:56 athena console-kit-daemon[1395]: WARNING: kvm_getenvv failed: cannot open /proc/4689/mem Nov 8 15:20:56 athena console-kit-daemon[1395]: WARNING: kvm_getenvv failed: cannot open /proc/4689/mem Nov 8 15:24:58 athena su: ajtim to root on /dev/pts/1 Nov 8 15:25:43 athena kernel: pid 5937 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:25:43 athena kernel: pid 5941 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:25:43 athena kernel: pid 5943 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:25:43 athena kernel: pid 5945 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:25:43 athena kernel: pid 5947 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:27:43 athena kernel: pid 5965 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:27:43 athena kernel: pid 5969 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:27:43 athena kernel: pid 5971 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:27:43 athena kernel: pid 5973 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:27:43 athena kernel: pid 5975 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:28:30 athena kernel: pid 5982 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:28:30 athena kernel: pid 5986 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:28:30 athena kernel: pid 5988 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:28:30 athena kernel: pid 5990 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) Nov 8 15:28:30 athena kernel: pid 5992 (operapluginwrapper.), uid 1001: exited on signal 11 (core dumped) I don't have /proc on my system and I don't know why I should have it? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
console-kit daemon
Hi! My system: FreeBSD 8.2-RELEASE-p3. I ahve a problem that computer freeze when I compailing ports without error. Sometimes freeze (hard reset help) and sometimes reboot. I did ran memtest 24 hours and there were no errors, I used smartmontools for check hard drive and there are no errors but the problem is here still. In rc.conf I have also:dbus_enable=YES polkitd_enable=YES hald_enable=YES saver=green blanktime=600 linux_enable=YES clamav_clamd_enable=YES clamav_freshclam_enable=YES cupsd_enable=YES smartd_enable=YES I have installed KDE 4 which I start from console (startx) and fluxbox. Today after restart computer happened first time: Nov 7 05:58:52 athena dbus[1127]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper) Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Could not determine active console Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 1 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 4 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 10 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 5 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 6 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 7 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 2 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 8 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 9 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 11 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 12 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 13 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 14 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 15 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 16 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena console-kit-daemon[1610]: WARNING: Error waiting for native console 3 activation: Inappropriate ioctl for device Nov 7 05:58:52 athena dbus[1127]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper) Nov 7 05:58:53 athena dbus[1127]: [system] Successfully activated service 'org.freedesktop.PolicyKit1' Nov 7 05:58:53 athena dbus[1127]: [system] Successfully activated service 'org.freedesktop.ConsoleKit' Thanks in advance... Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
smartmontools
Hi! Today I installed smartmontools on FreeBSD 8.2-RELEASE-p3. In the smartd.conf I changed just DEVICESCAN -a and I have in /var/log/messages: acd0: FAILURE - ATA_IDENTIFY status=51READY,DSC,ERROR error=4ABORTED Do I need to setup something else in the smartd.conf or is something wrong with my HD, please? Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
root waiting for
Hi! My system: FreeBSD 8.2-RELEASE-p3 #0: Tue Sep 27 18:07:27 UTC 2011 /etc/fstab looks like: DeviceMountpoint FStype Options DumpPass# /dev/ad0s1b noneswapsw 0 0 /dev/ad0s1a / ufs rw 1 1 /dev/ad0s1e /tmpufs rw 2 2 /dev/ad0s1f /usrufs rw 2 2 /dev/ad0s1d /varufs rw 2 2 /dev/acd0 /cdrom cd9660 ro,noauto 0 0 I have a HP Business Inkjet 3000 printer which is connected through router but I did also try to connect with USB and from this time (I think) I have root waiting to: usbus4 dmesg shows: ... usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ... Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 Root mount waiting for: usbus4 (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM status: SCSI Status Error (probe0:ata1:0:0:0): SCSI status: Check Condition (probe0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: TSSTcorp CDDVDW SH-S222L SB01 Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ugen4.2: IN-WIN at usbus4 umass0: IN-WIN iAPP CR-e500, class 0/0, rev 2.00/0.96, addr 2 on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x ugen1.2: Logitech at usbus1 ums0: Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.00, addr 2 on usbus1 ums0: 8 buttons and [XYZT] coordinates ID=0 Root mount waiting for: usbus4 And when I have message root waiting... many times when I start or reboot computer is slow and If I try to compile or use KDE4 usually freeze. Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
libreoffice-systray
First thank you for the Libreoffice 3.4.3_1. I built it with systray support, enable in the options and it doesn't work on my FreeBSD 8.2, KDE 4.6.5. Thanks. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: how can I use portmaster to update but skip a package
On Saturday 27 August 2011 00:56:20 Randal L. Schwartz wrote: I use: portmaster -ai I ask you if you want to install or not. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
printer - broadband router
Hi! My system: FreeBSD 8.2-RELEASE-p1 #0m I use KDE 4.6.5 CUPS and HPLIP are installed. I have an old broadband router D-604 (dlink), cable Internet and my computer with FreeBSD and the other one with Windows are connected to the router. I got HP bussiness inkjet 5000 which was connected to the network (my work). And the last one: I never had printer on my computer with FreeBSD and looks like is not so easy to setup. I just run HP Device Manager and it didn't find anything but light where is printer connected blink. How can I start, please. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
gcc 4.4.7
Hi! I decided to switch from portmaster to portupgrade and pkddb -F show many stale dependencies on gcc-4.4.5.20110503 (lang/gcc44). Do I need to put new dependencies to gcc-4.5.4.20110630 or something else, please? For portmaster I put IGNOREMI+ line and it works but I don't know how to do with portupgrade. Thanks in advance. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Ekiga FreeBSD (for a future without Skype)
On Sunday 22 May 2011 12:44:50 Randal L. Schwartz wrote: paid) PSTN-to-SIP bridges, it can nearly completely replace Skype, at least for point-to-point audio/video. (No SILK though... there's nothing that comes close, sadly.) What about Blink: http://icanblink.com/ IMO Ekiga is not good replacemnet for Skype. I comunicate with many Windows users and Skype is the best choice if you like it or not. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: boot error
On Sunday 27 March 2011 09:26:26 Franci Nabalanci wrote: I boot in the single user mode and when I run /sbin fsck -y I got Permission denied. The same is if I /mount -w / and I gor Permission Denied. On Sun, Mar 27, 2011 at 9:11 AM, Erich Dollansky erichfreebsdl...@ovitrap.com wrote: Hi, On Sunday 27 March 2011 20:17:09 Franci Nabalanci wrote: Hi! My system is FreeBSD releaese 8.2. I installed KDE 4.6.1 and run it. And I updated ATI drivers too. When I start KDE It freeze when I try to change a background picture.. After restart of computer I got an error and boot in the single mode. /dev/ad0s1a: LINK COUNT DIR I=376823 OWNER= ROOT mode 40700 SIZE=1024 MTIME= Mar 27 ...COUNT 18 SHOULD BE 19 /dev/ad0s1a LINK COUNT INCREASING /dev/ad0s1a UNEXPECTED INCONSISTENCY: RUN fsck MANUALLY Automatic file system check failed: help! ERROR: ABORTING BOOT (sending SIGTERM to parent)! If I manually run fsck -p (for example) /dev/ad0s1a I got permission denied. you have to boot into single user mode to run fsck on the root partition. Erich I was my mistake, gr. I wrote /sbin/ fsck -y and should nbe /sbin/fsck -y Thanks. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: android phone -pc-ineternet
On Wednesday March 16 2011 19:58:13 Da Rock wrote: On 03/17/11 07:04, ajtiM wrote: On Wednesday March 16 2011 09:39:11 Mark Felder wrote: On Wed, 16 Mar 2011 02:48:45 -0500, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: IF I understand you correctly here, you need to configure the wifi connection on your phone, and have a wifi access point available. Else- see above... No, he's referring to wired tethering over USB. This is the preferred way of tethering to your phone because it doesn't drain your battery or start your phone on fire :) I've not had success with it on FreeBSD but I must admit I haven't put much effort into it. Regards, Mark ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org I want to connect a phone with usb to PC and use Internet through PC. At work Itried on MAC compuer and it easy but onn FreeBSD I don't know how. I don't have wirelless at home and I like to use wired... To do so you'd have to have a rooted Android system to change the routing. They're not designed to operate like that. As for the driver- I posted before that its a project to do... BTW can anyone confirm 8.3 release date and driver support for iPhone and/or Android? Although I'm reasonably sure iPhone uses a very different method than Android from my research. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org The Android phone HTC Inspire 4G is design to use Internet Pass-through (has an option) and mine is not rooted and on Mac computer is not a problem to setup and us it. I read on the forums tha people use on Linux too and Windows. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: android phone -pc-ineternet
On Wednesday March 16 2011 09:39:11 Mark Felder wrote: On Wed, 16 Mar 2011 02:48:45 -0500, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: IF I understand you correctly here, you need to configure the wifi connection on your phone, and have a wifi access point available. Else- see above... No, he's referring to wired tethering over USB. This is the preferred way of tethering to your phone because it doesn't drain your battery or start your phone on fire :) I've not had success with it on FreeBSD but I must admit I haven't put much effort into it. Regards, Mark ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org I want to connect a phone with usb to PC and use Internet through PC. At work Itried on MAC compuer and it easy but onn FreeBSD I don't know how. I don't have wirelless at home and I like to use wired... Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
spam?
In the last week I got four emails like this one today: From: a href=mailto:br...@cran.org.uk;br...@cran.org.uk/abr/ To: a href=mailto:per...@pluto.rain.com;per...@pluto.rain.com/abr/ CC: a href=mailto:free...@edvax.de;free...@edvax.de/a, a href=mailto:lum...@gmail.com;lum...@gmail.com/a, a href=mailto:freebsd- questi...@freebsd.orgfreebsd-questions@freebsd.org Your email was unable reach the intended person that you were sending it to. For more information on our business please click on the following link: http://www.xpbargains.net;Click here for our We look forward to your continued business in the future. Regards Webmaster Thanks. Mitja http://jpgmag.com/people/lumiwa ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
