I've got a problem with a Pentax Optio S50. I can't make it work with my fbsd
5.3.
It's first announce as :
umass0: PENTAX product 0x001f, rev 1.10/0.00, addr 2
and some seconds later dmesg says the folowing several times :
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
I can't figure what it come from, the camera work well on the same computer
under XP, and well also under a fbsd 4.10 on an another computer.
I currently have both ehci and ohci in my kernel, but I've tried to separate
them, and it doesn't work.
Any help would be great.
Cheers,
Guzman
here is the complete dump of my dmesg, with connecting and deconnecting the
camera :
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #4: Sun Jan 23 11:35:36 CET 2005
[EMAIL PROTECTED]:/home/src/sys/i386/compile/Barjack
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2390.31-MHz 686-class CPU)
Origin = GenuineIntel Id = 0xf24 Stepping = 4
Features=0x3febf9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real memory = 534708224 (509 MB)
avail memory = 517746688 (493 MB)
npx0: [FAST]
npx0: math processor on motherboard
npx0: INT 16 interface
acpi0: PTLTD RSDT on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: 24-bit timer at 3.579545MHz port 0x8008-0x800b on acpi0
cpu0: ACPI CPU (2 Cx states) on acpi0
acpi_tz0: Thermal Zone on acpi0
acpi_acad0: AC Adapter on acpi0
acpi_cmbat0: Control Method Battery on acpi0
acpi_lid0: Control Method Lid Switch on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
agp0: SiS 645DX host to AGP bridge mem 0xd000-0xdfff at device 0.0 on
pci0
pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ -
AE_NOT_FOUND
pci1: ACPI PCI bus on pcib1
pci1: display, VGA at device 0.0 (no driver attached)
isab0: PCI-ISA bridge at device 2.0 on pci0
isa0: ISA bus on isab0
atapci0: SiS 962/963 UDMA133 controller port
0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: SiS 7012 port 0x1080-0x10ff,0x1400-0x14ff at device 2.7 on pci0
pcm0: [GIANT-LOCKED]
pcm0: Avance Logic ALC200 AC97 Codec
ohci0: SiS 5571 USB controller mem 0xe000-0xefff irq 5 at device 3.0
on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: SiS 5571 USB controller on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: SiS 5571 USB controller mem 0xe0001000-0xe0001fff irq 5 at device 3.1
on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: SiS 5571 USB controller on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: SiS 5571 USB controller mem 0xe0002000-0xe0002fff irq 5 at device 3.2
on pci0
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: SiS 5571 USB controller on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: EHCI (generic) USB 2.0 controller mem 0xe0003000-0xe0003fff at device
3.3 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: EHCI (generic) USB 2.0 controller on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pci0: simple comms at device 6.0 (no driver attached)
rl0: RealTek 8139 10/100BaseTX port 0x1800-0x18ff mem 0xe0004000-0xe00040ff
at device 8.0 on pci0
miibus0: MII bus on rl0
rlphy0: RealTek internal media interface on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:ca:bd:03:1d
cbb0: ENE CB1410 PCI-CardBus Bridge mem 0x8000-0x8fff irq 10 at
device 12.0 on pci0
cardbus0: CardBus bus on cbb0
pccard0: 16-bit PCCard bus on cbb0
fwohci0: Lucent FW322/323 mem 0xe0005000-0xe0005fff at device 13.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:40:ca:01:10:01:81:0f
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: IEEE1394(FireWire
