gptid's in fstab while installing FreeBSD using ISO
Hi All, How do I get gptid's as default in fstab while installing using FreeBSD iso file (Virtual,machine installation) ? Is this possible currently? if not how do I achieve this? I use guided partitioning while installing - If I were to tweak in to the source code which files or drivers I should be focusing on? which drivers write the contents of fstab? PS: any reason why we use device names in the place of gptid's as default in fstab. Thanks, Sainath. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: UUID in fstab.
Thanks John, I have tried as you suggested using a Live CD and yes the partitions uuid's are present in gptid .. I found the UUID's in /dev/gptid - how do I determine which uid corresponds to which partition (ufs or swap or boot) (I used glabel status and after some trial and error I found them) edited the fstab accordingly and everything is working now .. Is there a way to have both the /dev/XXXpYY and /dev/gptid/ present in /dev/ Thanks again for your support. On Sat, Aug 24, 2013 at 12:14 AM, John Baldwin wrote: > On Wednesday, August 21, 2013 4:38:00 pm varanasi sainath wrote: > > Thanks for the support. > > > > I want to use the uuid's found using sysctl -a in fstab. > > /dev/gptid/ has only uuid for boot partition. > > You probably have the other GPT paritions already mounted via > another name which removes the names in /dev/gptid. Try > booting an install CD or USB stick such that you use an > alternate root fs and don't mount any of the partitions on > your drive. Then you should be able to see the entries in > /dev/gptid and update your fstab appropriately. If you > console access you could also try to update your fstab to > use /dev/gptid/ directly instead of /dev/XXXpYY and > reboot. If it works I believe the /dev/XXXpYY names will > now be gone from /dev and the /dev/gptid names present > instead. > > -- > John Baldwin > -- Sainath Varanasi Hyderabad 09000855250 *My Website : http://s21embedded.webs.com **Linked In Profile : http://in.linkedin.com/pub/sainathvaranasi .. .. * ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: UUID in fstab.
Thanks for the support. I want to use the uuid's found using sysctl -a in fstab. /dev/gptid/ has only uuid for boot partition. Cheers Sainath On Wed, Aug 21, 2013 at 11:48 AM, Warner Losh wrote: > /dev/gptid/$UID > > maybe what you are looking for? > > Warner > > On Aug 21, 2013, at 12:16 AM, varanasi sainath wrote: > > > Hello, > > > > How to find UUID's for Disk volumes. > > > > I have used sysctl -a | grep uuid and was able to find > > freebsd-swap > > b55ff220-dcdd-11e2-a324-00155d55b20c > > > > freebsd-ufs > > b55762fc-dcdd-11e2-a324-00155d55b20c > > > > are these the corresponding UUID's for swap and ufs. > > > > I din't find /dev/ufsid folder to get the UUID's > > > > I have used glabel and was able to create labels, system boots well, > > everything works fine but I don't want to use labels (operating > constraint: > > to create labels I have to boot into single user mode, is there a way to > > create labels on mounted partitions (I hope not)). > > > > I found gptid folder which has boot UUID can this be used? > > > > How to use UUID's in fstab? > > > > I have tried using > > # DeviceMountpointFStype Options Dump > > Pass# > > uuid=b55762fc-dcdd-11e2-a324-00155d55b20c / ufs rw 1 1 > > > > that din't work. > > > > I found (from a post) /dev/ufsid/ should be used in fstab but I > don't > > see ufsid in /dev. Do we need to create this or does the system does it? > > > > Note: > > Using FreeBSD 9.1. created partitions using the guided partition tool. > > > > Reason: using a SCSI storage driver which changes the drive name > > accordingly but freebsd installer (boot) is unable to find the drives > which > > results in boot failure. > > > > Thanks, > > Sainath.* > > * > > * > > * > > *"Learning is the key to excellence".* > > ___ > > freebsd-driv...@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-drivers > > To unsubscribe, send any mail to " > freebsd-drivers-unsubscr...@freebsd.org" > > -- Sainath Varanasi Hyderabad 09000855250 *My Website : http://s21embedded.webs.com **Linked In Profile : http://in.linkedin.com/pub/sainathvaranasi .. .. * ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
UUID in fstab.
Hello, How to find UUID's for Disk volumes. I have used sysctl -a | grep uuid and was able to find freebsd-swap b55ff220-dcdd-11e2-a324-00155d55b20c freebsd-ufs b55762fc-dcdd-11e2-a324-00155d55b20c are these the corresponding UUID's for swap and ufs. I din't find /dev/ufsid folder to get the UUID's I have used glabel and was able to create labels, system boots well, everything works fine but I don't want to use labels (operating constraint: to create labels I have to boot into single user mode, is there a way to create labels on mounted partitions (I hope not)). I found gptid folder which has boot UUID can this be used? How to use UUID's in fstab? I have tried using # DeviceMountpointFStype Options Dump Pass# uuid=b55762fc-dcdd-11e2-a324-00155d55b20c / ufs rw 1 1 that din't work. I found (from a post) /dev/ufsid/ should be used in fstab but I don't see ufsid in /dev. Do we need to create this or does the system does it? Note: Using FreeBSD 9.1. created partitions using the guided partition tool. Reason: using a SCSI storage driver which changes the drive name accordingly but freebsd installer (boot) is unable to find the drives which results in boot failure. Thanks, Sainath.* * * * *"Learning is the key to excellence".* ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Kernel Panic - Unix socket communication in kernel module
Hello, I am writing a kernel module in which I am trying to connect to a UNIX socket (UNIX domain sockets use the file system as their address name space). Kernel module (loadable) acts as a client and User mode program acts as server, I have loaded the module using kldload and communication between user and kernel module works fine, when I try to load the kernel module from loader.conf - auto load the kernel module at boot up leads to kernel panic as the file system is not ready and kern_connect fails. How to notify kernel module that File system is ready? (any specific event flags) Is there any specific location for Unix domain socket files? (currently created it under /root/soc/socket ) Using "MODULE_DEPEND" Can I make the module dependent of file system? Thanks. * * ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"