Re: No Subject

2003-02-07 Thread André Ramos 
On Sat, 2003-02-08 at 05:42, Mike Meyer wrote:
> In <1044682305.35995.9.camel@localhost>, André Ramos <[EMAIL PROTECTED]> typed:
> > On Sat, 2003-02-08 at 05:33, Mike Meyer wrote:
> > > In <[EMAIL PROTECTED]>, [EMAIL PROTECTED] typed:
> > > > what are the bbest three languages to learn?
> > > English, Chinese, and Latin.
> > Why would anyone want to learn latin?
> > Go for portuguese english and french or german!
> 
> Because so many of the European languages are based on it. It's a good
> foundation for learning portuguese, french or german. I believe
> chinese fills that role for asian languages.
> 
>

Re: No Subject

2003-02-07 Thread Mike Meyer 
In <1044682305.35995.9.camel@localhost>, André Ramos <[EMAIL PROTECTED]> typed:
> On Sat, 2003-02-08 at 05:33, Mike Meyer wrote:
> > In <[EMAIL PROTECTED]>, [EMAIL PROTECTED] typed:
> > > what are the bbest three languages to learn?
> > English, Chinese, and Latin.
> Why would anyone want to learn latin?
> Go for portuguese english and french or german!

Because so many of the European languages are based on it. It's a good
foundation for learning portuguese, french or german. I believe
chinese fills that role for asian languages.

  http://www.mired.org/consulting.html
Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Re: No Subject

2003-02-07 Thread André Ramos 
On Sat, 2003-02-08 at 05:33, Mike Meyer wrote:
> In <[EMAIL PROTECTED]>, [EMAIL PROTECTED] typed:
> > what are the bbest three languages to learn?
> 
> English, Chinese, and Latin.
> 
> Of course, that does depend on what you're going to use them for.
> 
>

[no subject]

2003-02-07 Thread Mike Meyer 
In <[EMAIL PROTECTED]>, [EMAIL PROTECTED] typed:
> what are the bbest three languages to learn?

English, Chinese, and Latin.

Of course, that does depend on what you're going to use them for.

  http://www.mired.org/consulting.html
Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-07 Thread matrix 
what are the bbest three languages to learn?
thx for your answer

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-04 Thread matrix 
are u using ada in the developpement of freebsd


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-04 Thread Ed Alley 

In addition to being a FreeBSD enthusiast, I am also
a Minix enthusiast. I've learned a great deal about
how UNIX works by hacking the Minix OS myself.
A by-product of my hacks was the development of a
FreeBSD kernel module that impliments the
Minix Version 2 file system. The latest release
that it runs on is FreeBSD 4.6.x.

My question is whether the FreeBSD community
is interested in such a module? If so, then
how does one go about submitting a kernel
module for evaluation and possible inclusion
in the source?

My impression is that the Minix fs is a little
simplistic perhaps for inclusion in the FreeBSD
source. If so, then is it possible to submit it
as a port? I have never seen an example of a
kernel module that was submitted as a port,
however.

Ed Alley

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-03 Thread maildaemon 
subscribe freebsd-questions

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-03 Thread matrix 
in wich language the kernel of freebsd 5.0 is written.
and what are the languages used for the developpement of freebsd.
thank you for your answer

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-03 Thread Mike Meyer 
In <[EMAIL PROTECTED]>, C. W. Talbot <[EMAIL PROTECTED]> 
typed:
[...]
> Screen displays: very large X in middle of scree on a background
>  of large white dots.
> I:   ctl-alt-bkspc

Try pressing ctl-alt-keypad+ there, and see if it cycles to something
useful.

Of course, I'm guessing, since you didn't tell me how you got into the
X configuration process. That's not part of the standard FreeBSD
install process.

  http://www.mired.org/consulting.html
Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-03 Thread C. W. Talbot 




I really hate to bother you -  maybe it's something simple.

I'm loading FreeBSD 4.5 from a CD obatined from a Sam's Unleashed 
publication "FreeBSD Unleashed", authors Michael Urban and Brian Tiemann.

This all takes place during configuration after selecting the mouse, 
keyboard, graphics card and screen size.

I:   click on "done"

Screen:  Attempting to start server

then screen: Unable to start X server
Press enter to reconfigure

I:   press enter

Screen displays: very large X in middle of scree on a background
of large white dots.

I:   ctl-alt-bkspc

screen displays msg: the Free86 configuration process
seems to have failed. Would you like
to try again?



_
Tired of spam? Get advanced junk mail protection with MSN 8. 
http://join.msn.com/?page=features/junkmail


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-03 Thread Alex Huth 
Hi guys!

I want to install openoffice from the ports. When i try this iget the 
following error:


>> helpcontent_49_unix.tgz doesn't seem to exist in 
/usr/ports/distfiles/openoffice.
>> Attempting to fetch from 
http://ny1.mirror.openoffice.org/miscellaneous/helpcontent/.
--10:38:54--  
http://ny1.mirror.openoffice.org/miscellaneous/helpcontent/helpcontent_49_unix.tgz
   => `helpcontent_49_unix.tgz'
Connecting to xy ... connected.
Proxy request sent, awaiting response... 404 Not Found
10:38:54 ERROR 404: Not Found.

Same happened on the folloeing ftp-link. Where is this file? Searching on 
openoffice.org doesn´t help. Can someone help me?

So long ...


Alex Huth
-- 
Unix like TeePee no windows, no gates, Apache inside.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-02 Thread DoubleF 

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-01 Thread Kevin Schooler 
subscribe freebsd-questions [EMAIL PROTECTED]


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-02-01 Thread Remington L. 
I have a Sony VAIO GRX-570 running 5.0-RELEASE. Like many others I do
not have a mouse either and I have no idea how to get it back. I did
anticipate this so when I had 4.7 I documented this:
Psm0:  irq 12 on atkbdc0
Psm0: model Generic PS/2 mouse, device ID 0 

I doubt that helps but can anyone give me some clues on how to fix it



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-31 Thread Ben Compton 
subscribe freebsd-questions

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

USB Joystick (RE: No Subject)

2003-01-29 Thread Scott A. Moberly 
Quick question that i couldn't find in a quick look through the
internet...

I bought one of the nifty little devices called a joystick that plugs
into the USB port.  I have been able to get it to work with applications
that are NetBSD USB Joystick aware; but alas there are others.  Anyway
to get this thing recognized in a generic way, i.e. /dev/joy0 or through
XFree86-4 joystick?

-- 
Scott A. Moberly
[EMAIL PROTECTED]

Microsoft is not the Answer -
Microsoft is the question
and the Answer is no !



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-29 Thread Scott A. Moberly 
Quick question that i couldn't find in a quick look through the internet...

I bought one of the nifty little devices called a joystick that plugs into
the USB port.  I have been able to get it to work with applications that
are NetBSD USB Joystick aware; but alas there are others.  Anyway to get
this thing recognized in a generic way, i.e. /dev/joy0 or through
XFree86-4 joystick?

-- 
Scott A. Moberly
[EMAIL PROTECTED]

Microsoft is not the Answer -
Microsoft is the question
and the Answer is no !




To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-29 Thread tarmon 
None at all, minus the original initilization messages on startup.



---


This seems very odd. Do you have any system messages about the fxp device?


Corey





 

[EMAIL PROTECTED]  
 
Sent by: freebsd-
[EMAIL PROTECTED]   
To: 
owner-freebsd-questions@F   
cc:  
reeBSD.ORG  Subject: Disappearing 
from network (fxp) 

 

 
01/29/03 04:26 
PM  
  

 

 





I don't believe the other went through. If this gets duped, my apologies.


---


Hello,



I've been having problems with my test machines disappearing off of
the
network. When it happens, the machine does not respond to any incoming
traffic.
However, if I ping out, the connection starts working again. I'm guessing
the
card is somehow going to sleep and not responding until it sees outgoing
traffic. The ARP entry
still exists on the switch and router. I've had this problem with various
versions of FreeBSD.



The card is the Intel EtherExpress Pro 100+.




Any help would be appreciated.



Thanks,


Mike

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-29 Thread Charlie Root 


I encountered the errors during make buildworld after a cvsup update.


David



*default  release=cvs
*default  tag=RELENG_4


--
*** output from "uname -a" ***
--

FreeBSD bringback.biz 4.6-RELEASE FreeBSD 4.6-RELEASE #0: Tue Jan 28 09:59:25 PST 2003 
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BRINGBACK_SND  i386
 
   

--
***  error output from "cd /usr/src; make buildworld;" ***
--

building shared library pam_skey.so
building static pam_skey library
ranlib libpam_skey.a
===> lib/libpam/modules/pam_ssh
make: don't know how to make /usr/obj/usr/src/i386/usr/lib/libssh.a. Stop
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
1 error





---
*** error output in pam_ssh ***
---

cc -O -pipe  -I/usr/src/lib/libpam/modules/pam_ssh/../../../../crypto/openssh  -c 
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c -o pam_ssh.o
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:72: `PAM_OPT_STD_MAX' undeclared here 
(not in a function)
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:72: enumerator value for 
`PAM_OPT_KEYFILES' not integer constant
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:74: elements of array `other_options' 
have incomplete type
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:75: warning: excess elements in struct 
initializer
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:75: warning: (near initialization for 
`other_options[0]')
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:75: warning: excess elements in struct 
initializer
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:75: warning: (near initialization for 
`other_options[0]')
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:76: warning: excess elements in struct 
initializer
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:76: warning: (near initialization for 
`other_options[1]')
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:76: warning: excess elements in struct 
initializer
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:76: warning: (near initialization for 
`other_options[1]')
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:77: invalid use of undefined type 
`struct opttab'
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:116: warning: `struct options' declared 
inside parameter list
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:116: warning: its scope is only this 
definition or declaration, which is probably not what you want.
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:186: warning: `struct options' declared 
inside parameter list
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c: In function `pam_sm_authenticate':
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:262: storage size of `options' isn't 
known
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:274: warning: passing arg 2 of 
`pam_std_option' from incompatible pointer type
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:274: too many arguments to function 
`pam_std_option'
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c: In function `pam_sm_open_session':
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:345: storage size of `options' isn't 
known
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:362: warning: passing arg 2 of 
`pam_std_option' from incompatible pointer type
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:362: too many arguments to function 
`pam_std_option'
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c: In function `pam_sm_close_session':
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:575: storage size of `options' isn't 
known
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:582: warning: passing arg 2 of 
`pam_std_option' from incompatible pointer type
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:582: too many arguments to function 
`pam_std_option'
*** Error code 1

Stop in /usr/src/lib/libpam/modules/pam_ssh.


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-26 Thread Steve Graesart 
auth 614146a9 subscribe freebsd-questions \
[EMAIL PROTECTED]

__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-26 Thread Steve Graesart 
auth 614146a9 subscribe freebsd-questions [EMAIL PROTECTED]

__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-25 Thread Michael Wunderlich 
ölkjhgfd


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-19 Thread ivan 
Óâàæàåìûå äàìû è ãîñïîäà !

Ïðåäëàãàåì Âàì íîóòáóêè è êîìïüþòåðû ËÞÁÎÉ êîíôèãóðàöèè, ãîòîâûå è íà ÇÀÊÀÇ.
Äîñòàâêà ïî Ìîñêâå ÁÅÑÏËÀÒÍÎ. ÃÀÐÀÍÒÈß.

Êîìïüþòåðû äëÿ îôèñà:
Celeron 1000E\mb-asus video, sound int\256mb\30Gb \CD 52x\FDD\LAN - 275$
Athlon  1700\32Mb video\Sound\256mb\30Gb\CD 52x\FDD\LAN\ - 285$
Celeron 1700(Ð4-128)\32Mb video\Sound\256mb\30Gb Maxtor7200\CD 52x\FDD\LAN\USB2 - 295$
Pentium 1700(Ð4-256)\32Mb video\Sound\256mb\30Gb Maxtor7200\CD 52x\FDD\LAN\USB2 - 369$

Äëÿ äîìà:
Pentium 2000-512k\64Mb GeForce 4 mx 440 tv\Sound\256DDR\60Gb Maxtor7200\CD52x\FDD - 
499$
Pentium 2400-512k\ASUS\128Mb GeForce 4 mx 440 tv\Sound 
6Ch\256DDR\60GbMaxtor7200\CD52x\FDD - 629$

Äëÿ ðàáîòû ñ ãðàôèêîé:
Athlon 2100+\Gigabyte\64Mb GeForce 4 mx 440 tv\Sound 6Ch\512 DDR333\60Gb 
Maxtor7200\CD52x\FDD\Lan - 539$

Íîóòáóêè MaxSelect  äî 1000$
Íîóòáóêè Toshiba âñå ìîäåëè íåäîðîãî.

Ìîíèòîðû 17" îò 150$ ( LG )

Ñïåöèàëüíîå ïðåäëîæåíèå äëÿ êóïèâøèõ ñèñòåìíûé áëîê:
(äåèñòâóåò òîëüêî äî ïÿòíèöû)
LCD ÌÎÍÈÒÎÐÛ
SONY X72 - 699$
SAMSUNG 152S -375$
SONY S51 - 395$


À òàêæå êîïèðû, ïðèíòåðû, ñêàíåðû ïî ëó÷øèì öåíàì.
748-02-77, 995-07-48  Èâàí, Êàòÿ

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-19 Thread ivan 
Óâàæàåìûå äàìû è ãîñïîäà !

Ïðåäëàãàåì Âàì íîóòáóêè è êîìïüþòåðû ËÞÁÎÉ êîíôèãóðàöèè, ãîòîâûå è íà ÇÀÊÀÇ.
Äîñòàâêà ïî Ìîñêâå ÁÅÑÏËÀÒÍÎ. ÃÀÐÀÍÒÈß.

Êîìïüþòåðû äëÿ îôèñà:
Celeron 1000E\mb-asus video, sound int\256mb\30Gb \CD 52x\FDD\LAN - 275$
Athlon  1700\32Mb video\Sound\256mb\30Gb\CD 52x\FDD\LAN\ - 285$
Celeron 1700(Ð4-128)\32Mb video\Sound\256mb\30Gb Maxtor7200\CD 52x\FDD\LAN\USB2 - 295$
Pentium 1700(Ð4-256)\32Mb video\Sound\256mb\30Gb Maxtor7200\CD 52x\FDD\LAN\USB2 - 369$

Äëÿ äîìà:
Pentium 2000-512k\64Mb GeForce 4 mx 440 tv\Sound\256DDR\60Gb Maxtor7200\CD52x\FDD - 
499$
Pentium 2400-512k\ASUS\128Mb GeForce 4 mx 440 tv\Sound 
6Ch\256DDR\60GbMaxtor7200\CD52x\FDD - 629$

Äëÿ ðàáîòû ñ ãðàôèêîé:
Athlon 2100+\Gigabyte\64Mb GeForce 4 mx 440 tv\Sound 6Ch\512 DDR333\60Gb 
Maxtor7200\CD52x\FDD\Lan - 539$

Íîóòáóêè MaxSelect  äî 1000$
Íîóòáóêè Toshiba âñå ìîäåëè íåäîðîãî.

Ìîíèòîðû 17" îò 150$ ( LG )

Ñïåöèàëüíîå ïðåäëîæåíèå äëÿ êóïèâøèõ ñèñòåìíûé áëîê:
(äåèñòâóåò òîëüêî äî ïÿòíèöû)
LCD ÌÎÍÈÒÎÐÛ
SONY X72 - 699$
SAMSUNG 152S -375$
SONY S51 - 395$


À òàêæå êîïèðû, ïðèíòåðû, ñêàíåðû ïî ëó÷øèì öåíàì.
748-02-77, 995-07-48  Èâàí, Êàòÿ

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-17 Thread Grzegorz E . Matła 



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-05 Thread Sky McKinley 
~v


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-03 Thread freebsd-questions 
unsubscribe freebsd-questions


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2003-01-03 Thread andreas 
Dear FreeBSD-Team,

I have a problem and I hope you can help.
I will install the RouteServerDaemon on FreeBSD
and I need SNMPI, a program for analyzing the
MIBs. My problem is that there is no version for
FreeBSD and I hope you can help me!

Thanks!
Andreas


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-30 Thread shen chao 
Hi:

1.Can you tell me how to log off the user who had logged in manually.
2.how to add a Tab-reminding function for a new user.I want to change his  
shell .

Thanks


Shen Chao




_
MSN 8 with e-mail virus protection service: 3 months FREE*. 
http://join.msn.com/?page=features/virus&xAPID=42&PS=47575&PI=7324&DI=7474&SU= 
http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_eliminateviruses_3mf


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-29 Thread Morten olson 
Hi.. can i update from FreeBSD 4.7-STABLE to FreeBSD 5.0 when its out?
-- 
Morten olson <[EMAIL PROTECTED]>


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-27 Thread Sanja aka A_l_e_x 
I`m running FreeBSD 4.4-RELEASE. when i`m compiling kernel (do command "make"), 
freebsd prints me cc -c -O -pipe  -Wall -Wredundant-decls -Wnested-externs 
-Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  
-fformat-extensions -ansi  -nostdinc -I- -I. -I../.. -I/usr/include 
-I../../contrib/ipfilter  -D_KERNEL -include opt_global.h -elf  
-mpreferred-stack-boundary=2  ../../pci/if_rl.c
../../pci/if_rl.c:214: `miibus_readreg_desc' undeclared here (not in a function)
../../pci/if_rl.c:214: initializer element is not constant
../../pci/if_rl.c:214: (near initialization for `rl_methods[6].desc')
../../pci/if_rl.c:215: `miibus_writereg_desc' undeclared here (not in a function)
../../pci/if_rl.c:215: initializer element is not constant
../../pci/if_rl.c:215: (near initialization for `rl_methods[7].desc')
../../pci/if_rl.c:216: `miibus_statchg_desc' undeclared here (not in a function)
../../pci/if_rl.c:216: initializer element is not constant
../../pci/if_rl.c:216: (near initialization for `rl_methods[8].desc')
*** Error code 1
 Can you help me?
With best regargs, A_l_e_x.

---
http://www.one.lv - Tavs mobilais e-pasts!

Tagad lasi savu e-pastu ar mobilo telefonu - wap.one.lv!

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-26 Thread J. Seth Henry 
I asked almost the exact same question a month ago, and more recently a
few days ago. Apparently no one has been able to get xdm to work across
a network in FreeBSD, or they felt it was some rite of passage and didn't
want to spoil the surprise. Having tried for a month to get it to work
correctly, I suspect the former.

I have a very similar setup, except I plan to use minimalist FreeBSD
systems to connect to the server. The terminals I am attempting to setup
are pure X terminals, and I plan to have them display a logon prompt to
the server directly. My server does have a keyboard and CRT, but they are
stowed away in a wiring closet.

Here is what I do know. You can configure the XDMCP server (xdm) fairly
easily on the server. It involves adding a script to /usr/local/etc/rc.d
or modifying rc.conf to start it. You will need to modify Xaccess in
/usr/X11R6/lib/X11/lib/xdm (I believe), and remove a comment to allow your
X servers to connect.

On the server (or client depending on your POV), you run xdm --broadcast
-and it should pick up the first server it finds.

Unfortunately, I haven't had any luck getting xdm to work either at the
console or from the terminals as yet. I sometimes manage to get a login
prompt, but the login always fails. If you figure out, I'd like to know
how you did it - and I'll likewise remember you if I manage to work it
out.

Good luck,
Seth Henry

Date: Mon, 23 Dec 2002 13:09:26 -0800 (PST)
From: Shvetima Gulati <[EMAIL PROTECTED]>
Subject: simple xdm setup

Hi all,
  I want to set up my X configuration as follows:

1) I want all clients (people) to log in to machine 'Server'using the GUI
login.This brings them to their desktop. Typically these people are on
windows machines running X servers such as eXceed or X-Win32. Some might
be tunneling through ssh (port forwarding)so they would need to connect to
local displays?
2) There is no physical keyboard or mouse attached to 'Server'
3) for administration purposes the command line is adequate, so there is
no need for a GUI console.

Essentially I want the PCs to function like dumb terminals running X
displays. This is a fairly common scenario right ? How do I set up xdm for
this?

I searched the web but clear info was very sparse for FreeBSD (I am on
4.6.2).

All pointers/help appreciated.
Thanks,
Shv.



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-26 Thread Barry Lew 
auth 7052898f subscribe freebsd-questions
[EMAIL PROTECTED]


__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Re: Hard Drive Low Level Format (was No Subject)

2002-12-23 Thread Mark 
- Original Message -
From: "Jud" <[EMAIL PROTECTED]>
To: "Dmitry Ternovoy" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, December 23, 2002 8:50 PM
Subject: Re: Hard Drive Low Level Format (was No Subject)


> On Mon, 23 Dec 2002 19:50:06 +0200 (EET), Dmitry Ternovoy
> <[EMAIL PROTECTED]> wrote:
>
> > it is IDE. As it all the same to make? (Disk low level format or other
> > format)
>
> Jerry McAllister is right: You want to back up your critical data
> *now*.  OK, who is the manufacturer? The reason I ask is to find
> the manufacturer's diagnostic and low level formatting utilities on the
> Web -  or you can do this yourself.


I am no hard disk guru, but last thing I remember is that a low-level format
on an IDE disk is a sure way to hose your entire disk. I'd say, strip all
pertinent data off of it, and get yourself a new hard disk. Better for you,
better for your data. :)

- Mark


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Re: Hard Drive Low Level Format (was No Subject)

2002-12-23 Thread Jud 
On Mon, 23 Dec 2002 19:50:06 +0200 (EET), Dmitry Ternovoy 
<[EMAIL PROTECTED]> wrote:

it is IDE. As it all the same to make? (Disk low level format or other 
format)

Jerry McAllister is right: You want to back up your critical data *now*.  
OK, who is the manufacturer?  The reason I ask is to find the 
manufacturer's diagnostic and low level formatting utilities on the Web - 
or you can do this yourself.
--
Jud

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-23 Thread Dmitry Ternovoy 
it is IDE. As it all the same to make? (Disk low level format or other format)

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-23 Thread Dmitry Ternovoy 
Well! I have very many bad sectors! How can I do to get rid from them?

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-23 Thread Dmitry Ternovoy 
Hi! My BIOS not have tools for low level format (Compaq ProLiant)

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-23 Thread Dmitry Ternovoy 
Hallo! Help me please. How can I do low level format IDE disk on FreeBSD 4.7?

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-21 Thread Voicu Liviu 
my problem is mounting vfat/ext3 partitions:
under linux my table looks like:
/dev/hda1 - > win2k
/dev/hda2 - > root of gentoo linux
/dev/hda3 - > swap of gentoo linux
/dev/hda4 - > my freebsd workstation

Any 1 please, how do I mount the partition of linux/win2k under freebsd?

Every thing is named different in freebsd.
Thanks


-- 
Voicu Liviu


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-20 Thread Tim Strike 
unsubscribe freebsd-questions
unsubscribe freebsd-stable

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-18 Thread Eugene Olkhovick 
Hello questions,

su-2.05a# mount_smbfs -I rivne.fc.kiev.ua //eugeneol@freerivne/samba_1 /backup/
mount_smbfs: vfsload(smbfs): Exec format error

Tell me please how can I fix this problem

-- 
Best regards,
Eugene Olkhovickmailto:[EMAIL PROTECTED]
Finance & Credit Banking Corporation, Rivne branch   (0362)630028


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-18 Thread Fabio 
 
 

___
Busca Yahoo!
O melhor lugar para encontrar tudo o que você procura na Internet
http://br.busca.yahoo.com/

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-17 Thread Noah Garrett Wallach 
subscribe



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-16 Thread Vishal Sharda 
I tried to add dma device. I added the driver and made changes in configuration files.
But I am getting error message "Device not Configured". I am using Intel440 bx chipset 
motherboard.
Can you please tell me what else is to be done.

Regards,
Vishal.



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-12 Thread Nopbhol N.Dumrong 
I useFreeBSD4.5  and set it to run squid. My network has about 100
clients. If
all of them run IE, access time will drop and very slow to access web
page. Can I solve this problem? Number of clients are very large? or
depend on my link speed?

detail of my server:
FreeBSD4.5  + squid service + named
PII 350 MHz
HD SCSI 4.3 GB seagate 
256 MB of ram
internal link is 100 Mb
external link to ISP is 128Kb


Thank you for your suggestion


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-12 Thread Vishal Sharda 
I need information regarding functions splx() and splpe(). What do these functions do 
exactly.

Regards,
Vishal.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-11 Thread Lorin Lund 
which [EMAIL PROTECTED]
which [EMAIL PROTECTED]
which [EMAIL PROTECTED]
which [EMAIL PROTECTED]



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-11 Thread Deroy . B 
hi, i have been reading about usb device for the past 2 weeks and i did not
find what i wanted and wondered if you could give me a tip on how or where i
could find the info.

eia 232 (db 9) to usb

because the mechanical spec is 4 wire for usb (1 ground, 1Vbus, D+ and D-)
+/- 400mv between the two state and that eia 232 uses tx and rx (pin 2 and
3)
i wounder how they manage to put the data on D+ and D- and then switch to Rx
with the same two wire...(D+ D-)

so just to make it clear... D+ D- is tx and rx at the same time so this is
where i get lost.

if you can clarify or help in any way

thank you

Bernard Deroy
[EMAIL PROTECTED]


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-09 Thread Voicu Liviu 
Hi,
I'm a newbiew in FreeBSD ( usage 2 weeks ) and almost 1 year of Gentoo
that works ( in fact gentoo was created by *BSD ports ) almost like Freebsd
 (i mean to the ports )

The problem is how do I see what is going to be installed with some
application that I want.
Let say I want to install Mozilla so in gentoo i'll run "emerge --pretend
mozilla" and it will return me a list with all dependencies.
How do I do this in FreeBSD?

Thanks


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-06 Thread Partha Debnath 


sir,
please send me all category's some free megazine's,catalogs,
Brochures, CD'c, book's and ect., also send some free products.
For Men's
my Jeans - 32
my shirt size haff- 40
my shirt size full- XXL

my mailimg address is
Partha Debnath,
C/O.Sankar Dey,
Northbanamali pur, Near Citty Office.
Agartala,Tripura,INDIA.
PIN - 799001.

thank you
partha



_
MSN 8 with e-mail virus protection service: 2 months FREE* 
http://join.msn.com/?page=features/virus


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-05 Thread NESI 
Subject: Invitation to WEDELMUSIC and MUSICNETWORK events

WEDELMUSIC and MUSICNETWORK events
Final Programs

Several experts of MUSIC and MULTIMEDIA will meet 
in Darmstadt 9-12 December 2002 for discussing about the 
MUSIC Evolution towards the new standards and the future of 
music towards the Internet age. 

Protection models, DRM solutiom, distribution, optical 
music recognition, autio processing, audio understanding, 
format conversion, XML music notation, multimedia music,
accessibility of music, standards, saving the cultural heritage, 
cultural aspects of music, transaction models, libraries, archives, 
mobile systems, web tv and music,  
are only some of the relevant aspects that will be discussed. 

WEDELMUSIC conference program available online at:

http://www.wedelmusic.org/wedelmusic2002
http://www.wedelmusic.org/

MUSICNETWORK opEN WORKSHOP, free registration, final programme available at:

http://callisto.dsi.unifi.it/workshop/workshopprog.html
http://www.interactivemusicnetwork.org

please inform any collegue that could be intrested in the event. 
Please send and email with remove in subject to be removed from this 
list.

see you in Darmstadt.
cheers,
Paolo Nesi

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-05 Thread Partha Debnath 
sir,
please send me all category's some free
megazine's,catalogs,
Brochures, CD'c, book's and ect., also send some free
products.  
For Men's
my Jeans - 32
my shirt size haff- 40
my shirt size full- XXL

my mailimg address is
Partha Debnath,
C/O.Sankar Dey,
Northbanamali pur, Near Citty Office.
Agartala,Tripura,INDIA.
PIN - 799001.

thank you
partha


__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

(no subject)

2002-12-04 Thread Reference Dept at City College of San Francisco 
Hello my name is Dwight Young live 660 Broadway Apt2 San Francisco CA
94133.Would like information and thank you for contact.


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-04 Thread Peter Jamrisko 
Hello,

I already install FreeBSD 4.6.
How to I change sendmail configuration, when I changed hostname
and domain name? Default sendmail's installation working, but
when I change hostname, all sending mails terminated in
CLIENTMQUEUE folder. Please step-by-step help.

Thanks.

Peter

-- 

Vyhraj 2listky na Breakbeat Conference
7.12.2002 v Roxy. zacatek od 22:00
Soutez na http://web.volny.cz
Vice informaci o akci na www.lighthouse.cz


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-04 Thread Partha Debnath 
sir,
please send me all category's some free
megazine's,catalogs,
Brochures, CD'c, book's and ect., also send some free
products.  
For Men's
my Jeans - 32
my shirt size haff- 40
my shirt size full- XXL

my mailimg address is
Partha Debnath,
C/O.Sankar Dey,
Northbanamali pur, Near Citty Office.
Agartala,Tripura,INDIA.
PIN - 799001.

thank you
partha



__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-03 Thread Partha Debnath 
sir,
please send me all category's some free
megazine's,catalogs,
Brochures, CD'c, book's and ect., also send some free
products.  
For Men's
my Jeans - 32
my shirt size haff- 40
my shirt size full- XXL

my mailimg address is
Partha Debnath,
C/O.Sankar Dey,
Northbanamali pur, Near Citty Office.
Agartala,Tripura,INDIA.
PIN - 799001.

thank you
partha


__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-12-02 Thread BaD PiG 





-
Sign up for ICQmail at http://www.icq.com/icqmail/signup.html

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-26 Thread freebsdsinfronteras 
somos espaqoles estamos interesados en la traduccion de source a nuestra lengua natal, 
comentarios de codigo proyectos de traduccion etc todo gratis!!

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-22 Thread Denis Fournier 
Hi everybody I have sent a e-mail for help this morning concerning how to
add a new driver in FreeBSD. I specified that I work in a test bed and I
have installed FreeBSD 2.2.0 up to the current version 4.7. I just want to
know how to add a new driver to a freebsd version. 

I use the example of FreeBSD 2.2.0  and everybody that answered me asked me
why don't you use FreeBSD4.7. Please don't take me wrong, I am happy that
people are respondig to my question, but plesse stop with the use freeBSD
4.7 answer. Everything is explained in my e-mail.





--

Denis Fournier  Communications Research Centre Canada 
Tel:(613) 990-8782   3701 Carling Avenue, 
Fax:(613) 998-9648  Ottawa, Ontario, CANADA 
Email: [EMAIL PROTECTED]   K2H 8S2 


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-21 Thread Eric Dedrick 


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-19 Thread Peter Jamrisko 
Hello, 

Does anybody know the good documentation for installing Apache-SSL.

Now, i have a server running with apache 1.3.26.  I wish to make it
SSL enable server with using SSLeay. Can anyone give me an advice on
how to install Apache-SSL in my current server.

Thanks

Peter.



-- 
---
Výhodné nákupy přes internet, slevové akce, zajímavé ceny, dodávka
až do domu...http://shop.volny.cz

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-19 Thread Tolpanov, Dmitry 
subscribe freebsd-questions

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-18 Thread Jim Argyros 
auth 8823d9ea subscribe freebsd-questions [EMAIL PROTECTED]



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-17 Thread Toomas Vendelin 



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-16 Thread PageDeveloper 


Steven Pierce
Page-Developer
714-841-9246 

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-12 Thread Duncan Patton a Campbell is Dhu 
Subject: 4.7 Problems with gcc
Date: Tue, 12 Nov 2002 03:24:59 -0600
Message-Id: <[EMAIL PROTECTED]>
X-Mailer: Open WebMail 1.70 20020712
X-OriginatingIP: 127.0.0.1 (freebsd)
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1


This weekend I installed a 4.7-RELEASE system and have 
been plagued with problems on the box.  I first noticed when
I had to re-run "make" five or six times to get a mysql
instance
built.  Same problem with apache2.  

Re-installing the machine proved no solution.  So then I did a 
cvsup/buildworld, and ... same thing.

Anyone else running into this?   If not, I have some f$%'d
hardware.

RSVP and Thanks,

Dhu

...
cc -O -pipe 
-DINFODIR=\"/usr/share/info:/usr/local/info:/usr/X11R6/info:.\"
-DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" 
-I/usr/src/gnu/usr.bin/texinfo/info/../../../../contrib/texinfo
-I/usr/src/gnu/usr.bin/texinfo/info/../../../../contrib/texinfo/lib   
-D__FBSDID=__RCSID  -static -o info dir.o display.o doc.o
dribble.o echo-area.o filesys.o footnotes.o gc.o indices.o
info-utils.o info.o infodoc.o infomap.o m-x.o man.o nodemenu.o
nodes.o search.o session.o signals.o terminal.o tilde.o
variables.o window.o -ltermcap
/usr/obj/usr/src/i386/usr/src/gnu/usr.bin/texinfo/info/../libtxi/libtxi.a
===> gnu/usr.bin/texinfo/infokey
cc -O -pipe  -DHAVE_CONFIG_H
-DLOCALEDIR=\"/usr/share/locale\" 
-I/usr/src/gnu/usr.bin/texinfo/infokey/../../../../contrib/texinfo
-I/usr/src/gnu/usr.bin/texinfo/infokey/../../../../contrib/texinfo/lib   
-D__FBSDID=__RCSID -c
/usr/src/gnu/usr.bin/texinfo/infokey/../../../../contrib/texinfo/info/infokey.c
cc: Internal compiler error: program cc1 got fatal signal 11
*** Error code 1

Stop in /usr/src/gnu/usr.bin/texinfo/infokey.
*** Error code 1

Stop in /usr/src/gnu/usr.bin/texinfo.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.


Duncan Patton a Campbell is Duihb

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

(no subject)

2002-11-08 Thread Lefteris Tsintjelis 
unsubscribe freebsd-questions


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-07 Thread Tiago Andre 
Hello there...

I have a host conect do the router,
How do i send my domain name to the dns server,
i can ping by the ip but not by domain

Thanks
Tiago Camilo



_
STOP MORE SPAM with the new MSN 8 and get 2 months FREE* 
http://join.msn.com/?page=features/junkmail


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Re: No Subject

2002-11-05 Thread Giorgos Keramidas 
On 2002-11-05 17:41, Akifyev Sergey <[EMAIL PROTECTED]> wrote:
> On Tue, 2002-11-05 at 16:59, Tiago Andre wrote:
> > Hello there again...
> > iam trying install a program called iptraf, but i have some
> > problems on the instalation, i dont know if this is the good place
> > but here it is:

[...]
> > make install
> > install: unknown group root
>
> In Linux there is a system group with GID=0, called "root". iptraf
> was initially developed for Linux. Easiest way to build/install
> Linux root group dependent software is adding
>   root:*:0:
> to your /etc/groups file, so there will be 2 names for group with
> GID=0.

No.  The best solution is to "port" iptraf, by making the necessary
changes, and then save the differences in proper patch files.  The
existing ports can provide thousands of examples of how this should be
done to be easy to add as a port to the collection :)


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Re: No Subject

2002-11-05 Thread Akifyev Sergey 
On Tue, 2002-11-05 at 16:59, Tiago Andre wrote:
> Hello there again...
> iam trying install a program called iptraf, but i have some problems on the 
> instalation, i dont know if this is the good place but here it is:
> 
> when i make the
> 
> make install
> 
> appears:
> 
> install: unknown group root

In Linux there is a system group with GID=0, called "root". iptraf was
initially developed for Linux. Easiest way to build/install Linux root
group dependent software is adding
root:*:0:
to your /etc/groups file, so there will be 2 names for group with GID=0.

 
> What's the problem? Iam the root??

You are root, but in group "wheel"

> Thanks.
Nothing for...

Regards,
Ded PoXoron


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-11-05 Thread Tiago Andre 
Hello there again...
iam trying install a program called iptraf, but i have some problems on the 
instalation, i dont know if this is the good place but here it is:

when i make the

make install

appears:

install: unknown group root

What's the problem? Iam the root??

Thanks.

_
Get faster connections -- switch to MSN Internet Access! 
http://resourcecenter.msn.com/access/plans/default.asp


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-30 Thread Tiago Andre 
Hello there ...

i've configurated my tunnel ip4-ip6 by typing:

$ifconfig gif0 create
$ifconfig gif0 tunnel 193.137.232.35 193.136.2.2
$ifconfig gif0 inet6 alias 2001:690:2024::1

then i check if the tunnel is woeking by :

$ping6 ff02::1%gif0

and the result was a serals of reply's

then i do
$route add -inet6 default -interface gif0

but when i try to ping someone i dont have the reply (nothing happend's)
but i can ping6 to my selft

_
Unlimited Internet access -- and 2 months free!  Try MSN. 
http://resourcecenter.msn.com/access/plans/2monthsfree.asp


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-29 Thread rlm 

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-28 Thread Sebastian Boldt 
Hello,

how do I make buildworld and let it compile
the MIT Kerberos V port as the system kerberos
instead of heimdal?

thanks in advance...

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-28 Thread James Dean 
I am running FreeBSD stable and am having issues with my CD-RW drive that I 
didn't before.  I have recently reinstalled, due to QT3/KDE3 issues that I 
just gave up on, but the drive was working fine with burncd and such, but no 
I get errors even trying to mount about the device not being configured.  
There are two drives and in my /dev/ there is an acd0a, acd0c, acd1c but no 
acd1a and when I run ./MAKEDEV acd1a I get an error about a limit of 32 
devices.  The handbook said to add device acd1 and acd0 to the kernel, but 
the build says that acd is an unknown device.  Here are the errors and my 
current kernel files, any help would be great.

./MAKEDEV acd1a
[: 1a: bad number
acd1a is invalid -- can't have more than 32 cd devices

mount -t cd9660 /dev/acd1c /cdrom1
cd9660: /dev/acd1c: Device not configured

burncd -f /dev/acd1c -s 6 data WarLinux-0.5cd.iso fixate
burncd: open(/dev/acd1c): Device not configured

machine i386
cpu I686_CPU
ident   BSDGURU
maxusers32

#makeoptionsDEBUG=-g#Build kernel with gdb(1) debug 
symbols

options MATH_EMULATE#Support for x87 emulation
options INET#InterNETworking
options INET6   #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT#FFS usable as root device [keep 
this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big 
directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT#NFS usable as root device, NFS 
required
options MSDOSFS #MSDOS Filesystem
options CD9660  #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 
required
options PROCFS  #Process filesystem
options COMPAT_43   #Compatible with BSD 4.3 [KEEP 
THIS!]
options SCSI_DELAY=15000#Delay (in ms) before probing SCSI
options UCONSOLE#Allow users to grab the console
options USERCONFIG  #boot -c editor
options VISUAL_USERCONFIG   #visual boot -c editor
options KTRACE  #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B#Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM#Rate limit bad replies
options KBD_INSTALL_CDEV# install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT# Print register bitfields in debug
   # output.  Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT# Print register bitfields in debug
   # output.  Adds ~215k to driver.
options CPU_ENABLE_SSE
options USER_LDT
options TCP_DROP_SYNFIN
options EXT2FS  # Mount linux partition
options COMPAT_LINUX

# To make an SMP kernel, the next two are needed
#optionsSMP # Symmetric MultiProcessor Kernel
#optionsAPIC_IO # Symmetric (APIC) I/O

device  isa
device  eisa
device  pci
device  pcm

# Floppy drives
device  fdc0at isa? port IO_FD1 irq 6 drq 2
device  fd0 at fdc0 drive 0

# ATA and ATAPI devices
device  ata0at isa? port IO_WD1 irq 14
device  ata1at isa? port IO_WD2 irq 15
device  ata
device  atadisk # ATA disk drives
device  atapicd # ATAPI CDROM drives
device  atapifd # ATAPI floppy drives
options ATA_STATIC_ID   #Static device numbering

# SCSI peripherals
device  scbus   # SCSI bus (required)
device  da  # Direct Access (disks)
device  cd  # CD

# atkbdc0 controls both the keyboard and the PS/2 mouse
device  atkbdc0 at isa? port IO_KBD
device  atkbd0  at atkbdc? irq 1 flags 0x1
device  psm0at atkbdc? irq 12

device  vga0at isa?

# splash screen/screen saver
pseudo-device   splash

# syscons is the default console driver, resembling an SCO console
device  sc0 at isa? flags 0x100

# Floating point support - do not disable.
device  npx0at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device  apm0at nexus? disable flags 0

[no subject]

2002-10-27 Thread Ivan Sychev 
Hello!

I have one question. Why FreeBSD don`t installing from my Creative
CDROM(infra 54) 36x?
Thank you.

WBR, Ivan!


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-24 Thread partha debnath 
sir,
please send me all category's some free
megazine's,catalogs,
Brochures, CD'c, book's and ect., also send some free
products.  

my mailimg address is
Partha Debnath,
C/O.Sankar Dey,
Northbanamali pur, Near Citty Office.
Agartala,Tripura,INDIA.
PIN - 799001.

thank you
partha

__
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-22 Thread Sander Holthaus 
subscribe [EMAIL PROTECTED]

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-22 Thread Tiago Andre 
Hello there!
Iam a newbie trying to get start is world of Freebsd, but i have a little 
problem conserning the mount of cdrom because i dont no where is the nature 
path of it. I trye the command:
mount /dev/cdrom /mnt/cdrom -t iso9660
and
mount /dev/cd0c /mnt/cdrom -t iso9660
but it doesint work. my freebsd is the 4.7 version
please help me
PS:sorry my english





_
Protect your PC - get McAfee.com VirusScan Online 
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-21 Thread FreeBSD 



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-21 Thread Kozyr A.A. 



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-17 Thread Bryan Cassidy 
I guess this would be the right list to post to about this. I am
running Mozilla as my web browser and when I click a mailto: link it
opens Mozilla Mail. Well, I don't want it to open Mozilla Mail. I want
it to open the compose for Sylpheed. Can someone tell me how to do
this exactly. Thank You.

-
E-Mail: Bryan Cassidy <[EMAIL PROTECTED]>
Operating System: FreeBSD 4.6.2
GAIM: bsdsys
Yahoo Messenger: bsdsys

I have put alot of time in setting up my mail filters so please do not
just Reply-To: <[EMAIL PROTECTED]> Reply to the mailing
lists. This is very annoying for me.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-16 Thread Bryan Cassidy 

I don't know if someone has already asked this but what the hell. I was just wondering 
about pgp and sylpheed. I was wanting to set this up. I am running FreeBSD 4.6.2 with 
Sylpheed 0.8.5 which you probable already see that. I want to know how to set this up 
and put it to use. 

---
E-Mail: Bryan Cassidy <[EMAIL PROTECTED]>
Operating System: FreeBSD 4.6.2
GAIM: bsdsys
Yahoo Messenger: bsdsys

I have put alot of time in setting up my mail filters so please do not
just Reply-To: <[EMAIL PROTECTED]> Reply to the mailing
lists. This is very annoying for me.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-16 Thread Thomas Haug 

Hi people


How can i get my internal gigabit-NIC running on freebsd 4.7 RELEASE ?

Compaq Proliant ML 310 with: 

NC7760 PCI Gigabit Server Adapter (Integrated/Embedded)

hmmm i think this is a Broadcom Gigabit NIC but i cannot find the TYPE :-( The
includet bge device doesn't work.

My Box: FreeBSD 4.7-STABLE


Thanx

Thomas

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-16 Thread Bryan Cassidy 

I was just wondering something. I know this updates the ports but what I want to know 
is what "EXACTLY" does this command do in a little more detailed answers but simple 
enough to understand. The command is this

cvsup -g -L 2 -h cvsup2.freebsd.org /usr/share/examples/cvsup/ports-supfile

Thanks.

---
E-Mail: Bryan Cassidy <[EMAIL PROTECTED]>
Operating System: FreeBSD 4.6.2
GAIM: bsdsys
Yahoo Messenger: bsdsys

I have put alot of time in setting up my mail filters so please do not
just Reply-To: <[EMAIL PROTECTED]> Reply to the mailing
lists. This is very annoying for me.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-15 Thread Axel Gruner 

subscribe freebsd-questions

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-15 Thread Andrew Li 

unsubscribe [EMAIL PROTECTED]


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-15 Thread Brian Henning 

Hello-
I am want to set up a cvs repository on my bsd machine. I know how to do it.
I am just curious how others do it... do you create a new user within the
wheel group? what is the path you would use?  i am using this repository for
a lot of small devel project.
thanks-
brian

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-15 Thread dr diop allioum 

FROM Dr ALLIOUM DIOP
 Abidjan Cote d'Ivoire
 Ivory Coast
 
 Dear Sir,
 
 I am Dr ALLIOUM DIOP, a banking officer in Central 
 Business district in Abidjan Cote d'Ivoire/Ivory Coast.
 I am the account officer in-charge of an account with the
 sum of $9.5M USD belonging to Mr Robert Anselme, a Sierra 
 Leonne GOLD marchand expatriate who died 5 Years ago 
 here in Abidjan Cote d'Ivoire.I have tried so many times 
to contact the address of the next of kin, but there have 
been no response. As the account officer in-charge, I have 
full control over the fund. Now I need a partner who is 
ready to process and receive these fund on a sharing ration 
of 40/60%. Please let me know if you are interested in
 providing an account where I can arrange the transfer of
 the fund to you as the next of kin. If you are ready I
 will change all the document in your favour as the next 
 of kin and submit an application to the bank to transfer 
 these fund into your account as the next of kin and 
 beneficiary of the fund. I will ensure the transaction is 
 completed within a fews days with your co-operation, 
please send a reply and also send to me your telephone/fax 
number via my personal email address: 
[EMAIL PROTECTED]
 if you are ready for these transaction.
 
 Yours sincerely,
 
 Dr ALLIOUM DIOP



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-14 Thread gregmatu 

Hello all

I have problem and need your help.
I tried to build custom kernel but make (after 'config' and
'make depend' command) fails with error message:
if_setlladdr undefined reference to arp_ifinit

Could you give me any advice what is wrong with my custom kernel
configure (I attached this).

Thanks in advance.

-- 
Gregory Matus
mailto: [EMAIL PROTECTED]



Gerbil.gz
Description: GNU Zip compressed data

[No Subject]

2002-10-10 Thread tristan11 

On Thursday, October 10, 2002, at 03:06 PM, Jack L. Stone wrote:

At 05:52 PM 10.10.2002 -0400, [EMAIL PROTECTED] wrote:
Could anyone please tell me what ipfw rules need to be set in order to allow
software installation through the ports collection?  I tried adding a rule to
allow ftp outbound and although I can ftp out, I still cannot fetch the
source
tarball when using the make command in /usr/ports.  What else needs to be
open
for the make command to work?

Thank you,
Michelle



I believe it likes to use port 5999 for cvsuping.

I am able to use cvsup with our firewall.  The problem is when actually trying
to install the software using the make command since the make command tries to
fetch the source tarball from a remote server using ftp.  I cannot get ftp to
dowload data through our firewall.  Is it possible to use the make command
without opening up our firewall completely or is it best to put the source
tarballs in /usr/ports/distfiles manually?

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-10 Thread ksrgyn - 

unsubscribe freebsd-questions

_
Tenha você também um MSN Hotmail, o maior webmail do mundo: 
http://www.hotmail.com/br


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-08 Thread Octavian Hornoiu 

I had the same problem... This is how to fix it.  First, go back into
ports and do a "makde deinstall" and then a "make clean" to get rid of
your previous make configuration stuff.  Then run "make" in the mod_php4
dir and go through the little configuration program for PHP module.
Make sure that you do not check both imap and imap ssl since they are
exclusive.  Also, do not get the normal and ssl versions of any of the
options given.  Then, after you finish the make, do a make install and
it will load.

Octavian Hornoiu


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-07 Thread Tran Thang 




To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-06 Thread soanm singh 

do not reply

__
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-02 Thread Buddy Alexander Jr 

subscribe freebsd-questions

END
-- 
Buddy Alexander Jr

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-02 Thread Manuel Enrique García Cuesta 


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

[no subject]

2002-10-02 Thread Manuel Enrique García Cuesta 


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

<    4   5   6   7   8   9   10   >