Re: /dev/psm0 and Xorg woes
On 6/2/07, Daniel Molina Wegener <[EMAIL PROTECTED]> wrote: Yes... why shouldn't work? Try, and comment me the results. With moused you will have a mouse pointer in the console. Sometimes is usefull... Thanks for the help, Daniel. Now I do have a functioning mouse cursor and Xorg does indeed start, but the Synaptics driver won't load. I'm guessing because the touchpad is filtered via /dev/sysmouse and it can't pick up what it needs to run correctly. Now I get the following if I try and use the synaptics driver in Xorg: (EE) Synaptics Touchpad no synaptics touchpad detected and no repeater device (EE) Synaptics Touchpad Unable to query/initialize Synaptics hardware. (EE) PreInit failed for input device "Synaptics Touchpad" Then Xorg fails to start with the errors I mentioned earlier. For the moment I've reverted to the generic mouse driver - at least I can get to X, although the touchpad is still lacking all its wonderful goodies which made it a pleasure to use (scrolling, etc). (Also sending back to the list as I've got an annoying habit of hitting reply, instead of reply all) -- Regards, Paul Fraser http://furyc0de.net/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: /dev/psm0 and Xorg woes
El Vie, 1 de Junio de 2007, 18:13, Paul Fraser escribió: > Hi all, Hello, > > I've got an interesting problem which only just appeared today on my > 6-STABLE laptop. Upon boot, gdm fails to load with the following > error: > > [SNIP] > > Fatal server error: > Caught signal 11. Server aborting > > I do have hw.psm.synaptics_support=1 defined in /boot/loader.conf, and > the kernel does identify it as a touchpad on boot: > > psm0: irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Synaptics Touchpad, device ID 0 > > Trying to do cat /dev/psm0 gives me the following error: > cat: /dev/psm0: Resource temporarily unavailable > > To me (though I'd hardly say I'm qualified to say for sure) this seems > to be the cause of the problem. I'm not running moused on this system, > so there shouldn't be anything locking the device. > > Does anybody have any suggestions? It's quite frustrating, suddenly > being unable to use Xorg on my notebook when it was working perfectly > well just yesterday. But darned if I can think of what changes I > made... Try to check if moused is running. If is running, check if /dev/sysmouse is present. If moused is running, set mouse device in Xorg to /dev/sysmouse. Also, moused is a better option on Xorg. > > FWIW, the touchpad does work fine under Windows. > > -- > Regards, > > Paul Fraser > http://furyc0de.net/ > [SNIP] Regards, -- .O. | Daniel Molina Wegener | C/C++ Developer ..O | dmw [at] unete [dot] cl | FOSS Coding Adict OOO | BSD & Linux User| Standards Rocks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
/dev/psm0 and Xorg woes
Hi all, I've got an interesting problem which only just appeared today on my 6-STABLE laptop. Upon boot, gdm fails to load with the following error: gdm[874]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0 gdm[961]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0 gdm[965]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0 gdm[871]: Failed to start X server several times in a short time period; disabling display :0 Looking at the end of Xorg.0.log seems to indicate this is a problem with the Synaptics Touchpad on the notebook (/dev/psm0): (**) Option "CorePointer" (**) Synaptics Touchpad: Core Pointer (WW) : No Device specified, looking for one... (II) : Setting Device option to "/dev/psm0" (--) : Device: "/dev/psm0" (==) : Protocol: "Auto" (**) Option "AlwaysCore" (**) : always reports core events (==) : Emulate3Buttons, Emulate3Timeout: 50 (**) : ZAxisMapping: buttons 4 and 5 (**) : Buttons: 9 (II) XINPUT: Adding extended input device "" (type: MOUSE) (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE) (II) XINPUT: Adding extended input device "Acer TravelMate 4230 Integrated Keyboard" (type: KEYBOARD) Synaptics DeviceInit called SynapticsCtrl called. Synaptics DeviceOn called (--) Synaptics Touchpad synaptics touchpad found (--) Synaptics Touchpad, model: 0 (--) Firmware: 6.2 (--) Sensor: 18 (--) new absolute packet format (--) Touchpad has extended capability bits (--) -> multifinger detection (--) -> palm detection (WW) fcntl(21, O_ASYNC): Inappropriate ioctl for device (EE) xf86OpenSerial: Cannot open device /dev/psm0 Device busy. (WW) : cannot open input device Fatal server error: Caught signal 11. Server aborting I do have hw.psm.synaptics_support=1 defined in /boot/loader.conf, and the kernel does identify it as a touchpad on boot: psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 Trying to do cat /dev/psm0 gives me the following error: cat: /dev/psm0: Resource temporarily unavailable To me (though I'd hardly say I'm qualified to say for sure) this seems to be the cause of the problem. I'm not running moused on this system, so there shouldn't be anything locking the device. Does anybody have any suggestions? It's quite frustrating, suddenly being unable to use Xorg on my notebook when it was working perfectly well just yesterday. But darned if I can think of what changes I made... FWIW, the touchpad does work fine under Windows. -- Regards, Paul Fraser http://furyc0de.net/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: using KVM switch /dev/psm0 is missing
Malcolm Fitzgerald wrote: I have a no name 2 port KVM switch and a Logitech marble mouse USB with a ps/2 adapter. Richard Burakowski wrote: my cheapo noname kvm presents it's ps2 keyboard and mouse ports as usb devices. Malcolm Fitzgerald wrote: Does yours have USB cabling to match or does it have ps2 cables? Richard Burakowski wrote: it takes two ps2 (key+mouse) and three usb in - then one usb (2 total) out to each box. then there's the video of course. when the kvm switches, the usb devices are detached and then attached to the new target, which means there's a discernable lag (couple seconds) before they become active. also requires moused under x11 as the /dev/ums entry comes and goes - dosen't have the same issue with the keyboard. On Wednesday 22 March 2006 21:10, Malcolm Fitzgerald wrote: I see, mine only has ps/2 connections, so I'm still looking for psm0 when the mouse is plugged into the KVM switch. Plugging the mouse directly to the box is a solution but it is only KV not KVM. On 24/03/2006, at 10:23 AM, hackmiester / Hunter Fuller wrote: How could the machine tell the difference? Does your KVM pretend it is a keyboard and mouse when you are not switched to that machine? Mine does. In that way, I can boot a machine and then switch to it and it will work. That may be the trick, I typically boot both machines at the same time. The windows box doesn't care, it works every time. I turned off the BSD box and rebooted with the KVM selector on its port and everything works. There is still the possibility that the KVM switch is flaky. malcolm ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: using KVM switch /dev/psm0 is missing
On Wednesday 22 March 2006 21:10, Malcolm Fitzgerald wrote: > Malcolm Fitzgerald wrote: > I have a no name 2 port KVM switch and a Logitech marble mouse USB > with a ps/2 adapter. > > Richard Burakowski wrote: > >>> my cheapo noname kvm presents it's ps2 keyboard and mouse ports as > >>> usb devices. > > Malcolm Fitzgerald wrote: > >> Does yours have USB cabling to match or does it have ps2 cables? > > Richard Burakowski wrote: > > it takes two ps2 (key+mouse) and three usb in - then one usb (2 total) > > out to each box. then there's the video of course. > > when the kvm switches, the usb devices are detached and then attached > > to the new target, which means there's a discernable lag (couple > > seconds) before they become active. also requires moused under x11 as > > the /dev/ums entry comes and goes - dosen't have the same issue with > > the keyboard. > > I see, mine only has ps/2 connections, so I'm still looking for psm0 > when the mouse is plugged into the KVM switch. Plugging the mouse > directly to the box is a solution but it is only KV not KVM. How could the machine tell the difference? Does your KVM pretend it is a keyboard and mouse when you are not switched to that machine? Mine does. In that way, I can boot a machine and then switch to it and it will work. > > > malcolm > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" -- --hackmiester Walk a mile in my shoes and you will be a mile away in a new pair of shoes. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFD/yYl3ApzN91C7BcRAoVVAJ97uhjh30nQ4hd9bQ90gJqiwsLEfgCeKSrg bVfqEeJ09WhO6Y51WHEHb6o= =VTUd -END PGP SIGNATURE- -BEGIN GEEK CODE BLOCK- Version: Geek Code v3.1 (PHP) GCS/CM/E/IT d-@ s: a- C++$ UBLS*$ P+ L+++$ E- W++$ !N-- !o+ K-- !w-- !O- M++$ V-- PS@ PE@ Y--? PGP++ !t--- 5--? !X-- !R-- tv-- b+ DI++ D++ G+ e h r+++ z --END GEEK CODE BLOCK-- Quick contact info: Work: [EMAIL PROTECTED] Personal: [EMAIL PROTECTED] Large files/spam: [EMAIL PROTECTED] GTalk:hackmiester/AIM:hackmiester1337/Y!:hackm1ester/IRC:irc.7sinz.net/7sinz pgp8XKvRx6INI.pgp Description: PGP signature
Re: using KVM switch /dev/psm0 is missing
Malcolm Fitzgerald wrote: I have a no name 2 port KVM switch and a Logitech marble mouse USB with a ps/2 adapter. Richard Burakowski wrote: my cheapo noname kvm presents it's ps2 keyboard and mouse ports as usb devices. Malcolm Fitzgerald wrote: Does yours have USB cabling to match or does it have ps2 cables? Richard Burakowski wrote: it takes two ps2 (key+mouse) and three usb in - then one usb (2 total) out to each box. then there's the video of course. when the kvm switches, the usb devices are detached and then attached to the new target, which means there's a discernable lag (couple seconds) before they become active. also requires moused under x11 as the /dev/ums entry comes and goes - dosen't have the same issue with the keyboard. I see, mine only has ps/2 connections, so I'm still looking for psm0 when the mouse is plugged into the KVM switch. Plugging the mouse directly to the box is a solution but it is only KV not KVM. malcolm ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: using KVM switch /dev/psm0 is missing
Malcolm Fitzgerald wrote: On 22/03/2006, at 8:40 PM, Richard Burakowski wrote: Malcolm Fitzgerald wrote: I have a no name 2 port KVM switch and a Logitech marble mouse USB with a ps/2 adapter. my cheapo noname kvm presents it's ps2 keyboard and mouse ports as usb devices. Does yours have USB cabling to match or does it have ps2 cables? malcolm it takes two ps2 (key+mouse) and three usb in - then one usb (2 total) out to each box. then there's the video of course. when the kvm switches, the usb devices are detached and then attached to the new target, which means there's a discernable lag (couple seconds) before they become active. also requires moused under x11 as the /dev/ums entry comes and goes - dosen't have the same issue with the keyboard. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: using KVM switch /dev/psm0 is missing
On 22/03/2006, at 8:40 PM, Richard Burakowski wrote: Malcolm Fitzgerald wrote: I have a no name 2 port KVM switch and a Logitech marble mouse USB with a ps/2 adapter. my cheapo noname kvm presents it's ps2 keyboard and mouse ports as usb devices. Does yours have USB cabling to match or does it have ps2 cables? malcolm ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: using KVM switch /dev/psm0 is missing
Malcolm Fitzgerald wrote: I have a no name 2 port KVM switch and a Logitech marble mouse USB with a ps/2 adapter. my cheapo noname kvm presents it's ps2 keyboard and mouse ports as usb devices. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
using KVM switch /dev/psm0 is missing
I have a no name 2 port KVM switch and a Logitech marble mouse USB with a ps/2 adapter. The KVM switch works on port 1 and 2 when it is connected to the windows box. The mouse works on the ps/2 port when it is connected directly to the BSD box. When the mouse is connected via the KVM switch the mouse doesn't work and there is no psm0 in /dev. What can I do to discover the mouse and get /dev/psm0 ? -- Malcolm Fitzgerald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
mknod /dev/psm0 c 21 1 root:wheel (fails..)
Subject: mknod /dev/psm0 c 21 1 root:wheel (fails..) Hello, I've been trying to figure out "what" creates /dev/psm0 on FreeBSD-5.2.1 for I'm stuck with a new Dell-Inspiron-5150 where FreeBSD cannot see the standard mouse. As I stated in my last email, Linux and Windows-XP has not displayed this problem. Sooo, I took a look on my other FreeBSD-5.2.1 laptop, a Fujitsu and saw that the files that are missing are on this laptop so I read the manpage for "mknod" and ran the following commands in hope of creating /dev/psm0 I used the same major:minor numbers from my laptop and got the following error. #> mknod /dev/psm0 c 21 1 root:wheel And here was the error I got. #> mknod: /dev/psm0: No such file or directory Well depite messing with this for quite some time I still had enought humor left to say outloud.. NO KIDDING.. S, I'm now wondering what does create /dev/psm0 and what does it take from the keyboard to create devices such as /dev/psm0 and /dev/mouse etc. The mouse is NOT detected via sysinstall and I noticed in the "mouse" setup options there was also an option that mentioned a non-existant device file, that was /dev/mse0 Thanks for any help on this. :) -- Bill Schoolcraft PO Box 210076 -o) San Francisco CA 94121 /\ "UNIX, A Way Of Life."_\_v http://billschoolcraft.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 5.1 can't recognize /dev/psm0
On some of my systems I have found USB or other hardware being disabled in BIOS. Check to be sure its enabled before you spend too much time digging in FBSD as I did once. Also might want to have a look at how your emailer is addressing the from block for you. I would think that some spam filters might have an issue with underscores used as your name. Jason On Sat, 2003-10-11 at 19:05, Ку Ку wrote: >Hello! Sorry, i have a trouble with /dev/psm0 my system can't >see it! I've added (device psm) in my KERNEL but nothing happens! >System doesn't see psm also when i do dmesg! >Please help me if you can. > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD 5.1 can't recognize /dev/psm0
Hello! Sorry, i have a trouble with /dev/psm0 my system can't see it! I've added (device psm) in my KERNEL but nothing happens! System doesn't see psm also when i do dmesg! Please help me if you can. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: /dev/psm0
"DJ Landreneau" <[EMAIL PROTECTED]> writes: > As the original poster of this thread I feel compelled to provide some more > information. > > I am running FreeBSD 5.0 that I obtained through the FreeBSD Unleased book I > purchased from Barnes & Noble. > > Here is a numerated list of more: > > 1. Sony VAIO PCG-GRX550 laptop. There is some info about FreeBSD on laptops here: http://www.cse.ucsc.edu/~dkulp/fbsd/laptop.html I do not see the PCG-GRX550 listed, but several other vaio PCGs are listed, maybe one is sufficiently similar. > 2. 40gb hard drive > 3. 512mb RAM. > 4. The video adapter is a Mobility Raadeon 7500 with 32mb of video memory. > > When I boot up FreeBSD and do ls -al on the /dev directory I do have > busmouse or psm0 in the directory. Someone in an earlier reply to my post > said this means that I do not have psm0 support in my kernel. > > Therefore, I am in the process of researching building a custom kernel that > will include support for the PS/2 mouse. > > I must admit that I am rather surprised that an advanced OS such as FreeBSD > does not include support for PS/2 in its generic configuration. well the ps/2 trackpad on my dell inspirion 5000 laptop works great. (Only problem is haven't figured out how to disable the tap-to-click misfeature.) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: /dev/psm0
Benjamin Walkenhorst <[EMAIL PROTECTED]> writes: > On Monday, 28. July 2003 13:40, DJ Landreneau wrote: > > As the original poster of this thread I feel compelled to provide some more > > information. > > > > I am running FreeBSD 5.0 that I obtained through the FreeBSD Unleased book > > I purchased from Barnes & Noble. > > > When I boot up FreeBSD and do ls -al on the /dev directory I do have > > busmouse or psm0 in the directory. Someone in an earlier reply to my post > > said this means that I do not have psm0 support in my kernel. > > I take it you wanted to say "I do *NOT* have busmouse or psm0". > FreeBSD 5.x uses devfs, i.e. it creates device nodes automatically for > device-drivers present in the kernel. So if there is no /dev/psm0 this should > mean that there is no PS/2-Mouse-Support present in the kernel. [snip] What if the PS/2-Mouse-Support in the kernel failed to detect a ps/2 mouse? Wouldn't that result in no /deve/psm0, even with PS/2-Mouse-Support in the kernel? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: /dev/psm0
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday, 28. July 2003 13:40, DJ Landreneau wrote: > As the original poster of this thread I feel compelled to provide some more > information. > > I am running FreeBSD 5.0 that I obtained through the FreeBSD Unleased book > I purchased from Barnes & Noble. > When I boot up FreeBSD and do ls -al on the /dev directory I do have > busmouse or psm0 in the directory. Someone in an earlier reply to my post > said this means that I do not have psm0 support in my kernel. I take it you wanted to say "I do *NOT* have busmouse or psm0". FreeBSD 5.x uses devfs, i.e. it creates device nodes automatically for device-drivers present in the kernel. So if there is no /dev/psm0 this should mean that there is no PS/2-Mouse-Support present in the kernel. > > Therefore, I am in the process of researching building a custom kernel that > will include support for the PS/2 mouse. If you haven't done so already, check the handbook (/usr/share/doc//books/handbook). You should also check /usr/src/sys/i386/conf/GENERIC and build your custom kernel file from that. Copy GENERIC to a new filename and edit, remove all the stuff you don't need (SCSI, probably, among others), add stuff you do need... > > I must admit that I am rather surprised that an advanced OS such as FreeBSD > does not include support for PS/2 in its generic configuration. I use FreeBSD 5.0 with a PS/2 mouse on my machine, and the mouse worked happily from the first moment on. I don't think this is a problem with the PS/2-driver. I understand there is a website on using FreeBSD on laptops. Maybe you should google for that, and maybe ask Sony, as well, if they have some experience regarding FreeBSD (or some other BSD) on the model you are using. There also was a website about using UNIX and UNIX-like systems on laptops, www.mobilix.org; unfortunately, the website is not available due to copyright reasons, but there is an eMail-link to the site's owner. Maybe he can give you a hint, as well. Kind regards, Benjamin - -- Benjamin Walkenhorst eMail: [EMAIL PROTECTED] homepage: http://www.krylon.de -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) Comment: Public Key available at http://www.krylon.de iD8DBQE/JREKoYumWdMvhMQRAunFAJ9LXCPaJ0F+Rf1AcNUztsskWf3vfQCfRaCB a0R0tpY1i2D4k56PiirG5IU= =bZSL -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: /dev/psm0
As the original poster of this thread I feel compelled to provide some more information. I am running FreeBSD 5.0 that I obtained through the FreeBSD Unleased book I purchased from Barnes & Noble. Here is a numerated list of more: 1. Sony VAIO PCG-GRX550 laptop. 2. 40gb hard drive 3. 512mb RAM. 4. The video adapter is a Mobility Raadeon 7500 with 32mb of video memory. When I boot up FreeBSD and do ls -al on the /dev directory I do have busmouse or psm0 in the directory. Someone in an earlier reply to my post said this means that I do not have psm0 support in my kernel. Therefore, I am in the process of researching building a custom kernel that will include support for the PS/2 mouse. I must admit that I am rather surprised that an advanced OS such as FreeBSD does not include support for PS/2 in its generic configuration. DJ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Nicolas Galler Sent: Sunday, July 27, 2003 9:50 PM To: [EMAIL PROTECTED] Subject: Re: /dev/psm0 On Sun, Jul 27, 2003 at 06:25:59PM -0700, Charlie Schluting wrote: > > > On Sun, Jul 27, 2003 at 08:52:39AM -0400, DJ Landreneau wrote: > > > > I am running 5.0 that came with "FreeBSD Unleashed" by Sams. > > > > > > > > Can you point me into the correct direction for enabling kernel support for > > > > psm0? > > > > > > Read the chapter in the handbook about kernel configuration, and take > > > it from there. > > > > > > Kris > > > > I am sure the psm device is built in the generic kernel though. > > > > Nick > > > Then... your original question was answered.. by yourself. > > I don't know what you are trying to ask. > I guess the original question should have been, why isnt the touchpad working with the psm support included in the generic kernel, I would be hard pressed to help since I have never used fbsd on a laptop - I was just pointing out that including psm support in the kernel is probably not going to be enough since it is already there. I am not the original poster, by the way, though I would be interested in the answer as well. Nick ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: /dev/psm0
On Sun, Jul 27, 2003 at 06:25:59PM -0700, Charlie Schluting wrote: > > > On Sun, Jul 27, 2003 at 08:52:39AM -0400, DJ Landreneau wrote: > > > > I am running 5.0 that came with "FreeBSD Unleashed" by Sams. > > > > > > > > Can you point me into the correct direction for enabling kernel support for > > > > psm0? > > > > > > Read the chapter in the handbook about kernel configuration, and take > > > it from there. > > > > > > Kris > > > > I am sure the psm device is built in the generic kernel though. > > > > Nick > > > Then... your original question was answered.. by yourself. > > I don't know what you are trying to ask. > I guess the original question should have been, why isnt the touchpad working with the psm support included in the generic kernel, I would be hard pressed to help since I have never used fbsd on a laptop - I was just pointing out that including psm support in the kernel is probably not going to be enough since it is already there. I am not the original poster, by the way, though I would be interested in the answer as well. Nick ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: /dev/psm0
> > On Sun, Jul 27, 2003 at 08:52:39AM -0400, DJ Landreneau wrote: > > > I am running 5.0 that came with "FreeBSD Unleashed" by Sams. > > > > > > Can you point me into the correct direction for enabling kernel support for > > > psm0? > > > > Read the chapter in the handbook about kernel configuration, and take > > it from there. > > > > Kris > > I am sure the psm device is built in the generic kernel though. > > Nick Then... your original question was answered.. by yourself. I don't know what you are trying to ask. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: /dev/psm0
On Sun, Jul 27, 2003 at 04:31:59PM -0700, Kris Kennaway wrote: > On Sun, Jul 27, 2003 at 08:52:39AM -0400, DJ Landreneau wrote: > > I am running 5.0 that came with "FreeBSD Unleashed" by Sams. > > > > Can you point me into the correct direction for enabling kernel support for > > psm0? > > Read the chapter in the handbook about kernel configuration, and take > it from there. > > Kris I am sure the psm device is built in the generic kernel though. Nick ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: /dev/psm0
On Sun, Jul 27, 2003 at 08:52:39AM -0400, DJ Landreneau wrote: > I am running 5.0 that came with "FreeBSD Unleashed" by Sams. > > Can you point me into the correct direction for enabling kernel support for > psm0? Read the chapter in the handbook about kernel configuration, and take it from there. Kris pgp0.pgp Description: PGP signature
RE: /dev/psm0
I am running 5.0 that came with "FreeBSD Unleashed" by Sams. Can you point me into the correct direction for enabling kernel support for psm0? DJ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Kris Kennaway Sent: Sunday, July 27, 2003 5:10 AM To: DJ Landreneau Cc: [EMAIL PROTECTED] Subject: Re: /dev/psm0 On Sun, Jul 27, 2003 at 01:45:46AM -0400, DJ Landreneau wrote: > I recently installed fbsd on my Sony Vaio. I am unable to get my trackpad > mouse to work under X. I noticed that the device psm0 is not on the system > under /dev. You didn't mention which version you're running, but if you're running 4.x that means that you either haven't built the device (see /etc/MAKEDEV) and also may not have kernel support for the psm device, and under 5.x that you don't have kernel support for the psm device. Kris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: /dev/psm0
On Sun, Jul 27, 2003 at 01:45:46AM -0400, DJ Landreneau wrote: > I recently installed fbsd on my Sony Vaio. I am unable to get my trackpad > mouse to work under X. I noticed that the device psm0 is not on the system > under /dev. You didn't mention which version you're running, but if you're running 4.x that means that you either haven't built the device (see /etc/MAKEDEV) and also may not have kernel support for the psm device, and under 5.x that you don't have kernel support for the psm device. Kris pgp0.pgp Description: PGP signature
/dev/psm0
I recently installed fbsd on my Sony Vaio. I am unable to get my trackpad mouse to work under X. I noticed that the device psm0 is not on the system under /dev. How do I get a trackpad mouse to work? DJ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
