-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 02 December 2004 23:06, [EMAIL PROTECTED] wrote:
> Hi list,
>
> I have my Canon Lide 20 usb scanner working om my system. Setup was easy
> following the handbook.
>
> But I did not like all users being member of group operator;
> So I added a group scanner,
> to /dev/devfs.rules I add:
> add path uscanner0 mode 0660 group scanner # (group scanner is added)
> I add a user to group scanner.
> When I do ll /dev/uscanner0
> crw-rw 1 root scanner 233, 0 Dec 2 22:24 /dev/uscanner0
> When I do sane-find-scanner as the user I get:
> found USB scanner (UNKNOWN vendor and product) at device /dev/uscanner0
> and subsequently the scanner is not useable for the user.
> But when I add this user to group operator:
> found USB scanner (vendor=0x04a9, product=0x220d) at /dev/uscanner0
> and the scanner is working.
> but I see the scanner still belongs to user root and group scanner...
>
> Anyone an idea?
You probably need to change the corresponding /dev/usbN device nodes, too (I
must say that, I never tested this with devfs.rules). In my experience
sane-find-scanner steps thru the usb devices and exits, if it hasn't proper
permissions on a usb device node. For real-life scanning apps like xsane and
xscanimage you can define SANE_DEFAULT_DEVICE in your environment. This
should stop the apps from stepping thru the usb device nodes.
JFYI:
There is a (dirty) way to work around the needs of adding users to a scanner
specific group. You can set /dev/uscanner0 and the corresponding /dev/usbN to
world read- and writeable via usbd and usbd.conf.
% cat /etc/usbd.conf.my
# Scanners
device "Scanner"
devname "uscanner[0-9]+"
attach "chmod 666 /dev/${DEVNAME} ; chmod 666 /dev/usb0"
detach "chmod 660 /dev/usb0"
% cat /etc/rc.conf | grep usb
usbd_enable="YES" # Run the usbd daemon.
usbd_flags="-c /etc/usbd.conf.my" # Flags to usbd (if enabled).
But this method also opens a can of worms:
All devices nodes down to the usb device to where your scanner is connected to
must be set world read- and writeable. ie. when you connect your scanner
to /dev/usb1 the devices /dev/usb0, /dev/usb1 and /dev/uscanner0 must be set
to mode 666. For this reason, I attached my scanner to /dev/usb0. To work
around this, you can define SANE_DEFAULT_DEVICE as mentioned above.
- --
Christian Hiris <[EMAIL PROTECTED]> | OpenPGP KeyID 0x3BCA53BE
OpenPGP-Key at hkp://wwwkeys.eu.pgp.net and http://pgp.mit.edu
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.6 (FreeBSD)
iD4DBQFBr8GI09WjGjvKU74RAkh9AJ9bVHPSEhASe87HqQNif/Q4ypLH9gCXQSDn
TNKSbpmUzSS65b6ntdJ69Q==
=Vhy/
-END PGP SIGNATURE-
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
