On Wed, Feb 12, 2003 at 10:29:33PM -0500, george donnelly wrote:
> hi i've got a 3 disk raid 5 partition that is my main fs and then an 80gb
> ide drive on a separate partition at /vol1. i need to config my /etc/fstab
> for this and this is what i've got (see below). can someone tell me if looks
> correct?
>
> # DeviceMountpoint FStype Options Dump Pass#
> /dev/da0s1b noneswapsw 0 0
> /dev/da0s1a / ufs rw 1 1
> /dev/ad2s1e /vol1 ufs rw 2 2
> proc/proc procfs rw 0 0
>
Check the fstab(5) man page. I think maybe the Dump field for /vol1 should
be 1 as well. dump(8) tells you more about this. I am not 100% sure.
> also, if i were to reboot the machine with the pass # for /dev/ad2s1e
> (/vol1) set to 1, would this be incorrect (i think so) and would it cause
> damage to the disk?
The fstab(5) man page says that the root filesystem should be set to 1
andother filesystems should be set to 2. If you set them to 0, they will
not be checked. I don't think setting that field to 1 will damage
anything, but should be set 2 anyways.
Hope this helps.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message