BCM4401-B0 card error on FreeBSD 5.2.1
I also had same problem but succeeded in making BCM4401-B0 work, thanks to following information with this dirty quick patch. --- src/sys/dev/bfe/if_bfereg.h.origWed Sep 10 03:17:22 2003 +++ src/sys/dev/bfe/if_bfereg.h Tue Aug 24 22:13:10 2004 @@ -393,7 +393,11 @@ #define BFE_REG_PCI 0x18002000 #define BCOM_VENDORID 0x14E4 +#if 0 #define BCOM_DEVICEID_BCM4401 0x4401 +#else +#define BCOM_DEVICEID_BCM4401 0x170c +#endif #define PCI_SETBIT(dev, reg, x, s) \ pci_write_config(dev, reg, (pci_read_config(dev, reg, s) | (x)), s) I I just recompiled a 4.10 kernel with bfe support. I grab source code from http://people.freebsd.org/~dmlb/bfe-4.8.tar.gz At boot time, I get: pci1: unknown card (vendor=0x14e4, dev=0x170c) at 14.0 irq 11 When I try to insert the driver manually: module_register: module pci/bfe already exists! linker_file_sysinit if_bfe.ko failed to register! 17 I think I'm gone go back to Linux... cheers, Guillaume Mark wrote: You may have to build a kernel with the device bge # gig cards device bfe # 10- 100 cards entries to build the moduals, I would have thought they were with the base system. But I had to build a kernel for the bfe modual to work. Side note: The bfe entry is not in the GENERIC kernel on 4.10 but will build and work. The bge modual would not find my broadcom 4401. On Mon, Jul 26, 2004 at 05:00:39PM +0200, Guillaume Goutaudier wrote: bge gives me exactly the same error message. And still nothing like bge0: ... in dmesg output. Try bge. On Mon, Jul 26, 2004 at 03:11:42PM +0200, Guillaume Goutaudier wrote: / Hi all, // // I'm trying to move from Linux to FreeBSD on my compaq nx5000 laptop. // The FreeBSD version I installed is 5.2.1. // // I have a problem with the integrated broadcom BCM4401-B0 NIC. // // This is not a BCM4401 but a BCM4401-B0 card (PCI ID = 0x170c), and // the bfe driver does not seem to work: // // In the dmesg output, I don't have a single line with bfe0: // Instead, all I have is: // // pci1: network, ethernet at device 14.0 (no driver attached) // // When I try to install the bfe module manually, I get: // // # kldload miibus.ko // interface miibus.1 already present in the KLD 'kernel'! // kldload: can't load miibus.ko: file exists // # kldload if_bfe.ko // module_register: module pci/bfe already exists! // Module pci/bfe failed to register: 17 // module_register: module bfe/miibus already exists! // Module bfe/miibus failed to register: 17 // // I'm not familiar at all with *BSD drivers stuff so any help will be // REALLY appreciated ... // // cheers, // // // Guillaume // / ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BCM4401-B0 card error on FreeBSD 5.2.1
I just recompiled a 4.10 kernel with bfe support. I grab source code from http://people.freebsd.org/~dmlb/bfe-4.8.tar.gz At boot time, I get: pci1: unknown card (vendor=0x14e4, dev=0x170c) at 14.0 irq 11 When I try to insert the driver manually: module_register: module pci/bfe already exists! linker_file_sysinit if_bfe.ko failed to register! 17 I think I'm gone go back to Linux... cheers, Guillaume Mark wrote: You may have to build a kernel with the device bge # gig cards device bfe # 10- 100 cards entries to build the moduals, I would have thought they were with the base system. But I had to build a kernel for the bfe modual to work. Side note: The bfe entry is not in the GENERIC kernel on 4.10 but will build and work. The bge modual would not find my broadcom 4401. On Mon, Jul 26, 2004 at 05:00:39PM +0200, Guillaume Goutaudier wrote: bge gives me exactly the same error message. And still nothing like bge0: ... in dmesg output. Try bge. On Mon, Jul 26, 2004 at 03:11:42PM +0200, Guillaume Goutaudier wrote: / Hi all, // // I'm trying to move from Linux to FreeBSD on my compaq nx5000 laptop. // The FreeBSD version I installed is 5.2.1. // // I have a problem with the integrated broadcom BCM4401-B0 NIC. // // This is not a BCM4401 but a BCM4401-B0 card (PCI ID = 0x170c), and // the bfe driver does not seem to work: // // In the dmesg output, I don't have a single line with bfe0: // Instead, all I have is: // // pci1: network, ethernet at device 14.0 (no driver attached) // // When I try to install the bfe module manually, I get: // // # kldload miibus.ko // interface miibus.1 already present in the KLD 'kernel'! // kldload: can't load miibus.ko: file exists // # kldload if_bfe.ko // module_register: module pci/bfe already exists! // Module pci/bfe failed to register: 17 // module_register: module bfe/miibus already exists! // Module bfe/miibus failed to register: 17 // // I'm not familiar at all with *BSD drivers stuff so any help will be // REALLY appreciated ... // // cheers, // // // Guillaume // / ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- - | Guillaume GoutaudierInfrastructure Team | | Alplog consultant HP Services EMEA (SEM) | | [EMAIL PROTECTED] [EMAIL PROTECTED] | | | | Alplog Hewlett-Packard | | 119, Bd Stalingrad Boulevard Steve Biko | | 69100 Villeurbanne (FR) 38090 Villefontaine (FR) | | Tel +33 04 72 69 26 00 Tel +33 04 74 99 30 65 | - ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
BCM4401-B0 card error on FreeBSD 5.2.1
Hi all, I'm trying to move from Linux to FreeBSD on my compaq nx5000 laptop. The FreeBSD version I installed is 5.2.1. I have a problem with the integrated broadcom BCM4401-B0 NIC. This is not a BCM4401 but a BCM4401-B0 card (PCI ID = 0x170c), and the bfe driver does not seem to work: In the dmesg output, I don't have a single line with bfe0: Instead, all I have is: pci1: network, ethernet at device 14.0 (no driver attached) When I try to install the bfe module manually, I get: # kldload miibus.ko interface miibus.1 already present in the KLD 'kernel'! kldload: can't load miibus.ko: file exists # kldload if_bfe.ko module_register: module pci/bfe already exists! Module pci/bfe failed to register: 17 module_register: module bfe/miibus already exists! Module bfe/miibus failed to register: 17 I'm not familiar at all with *BSD drivers stuff so any help will be REALLY appreciated ... cheers, Guillaume ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BCM4401-B0 card error on FreeBSD 5.2.1
Try bge. On Mon, Jul 26, 2004 at 03:11:42PM +0200, Guillaume Goutaudier wrote: Hi all, I'm trying to move from Linux to FreeBSD on my compaq nx5000 laptop. The FreeBSD version I installed is 5.2.1. I have a problem with the integrated broadcom BCM4401-B0 NIC. This is not a BCM4401 but a BCM4401-B0 card (PCI ID = 0x170c), and the bfe driver does not seem to work: In the dmesg output, I don't have a single line with bfe0: Instead, all I have is: pci1: network, ethernet at device 14.0 (no driver attached) When I try to install the bfe module manually, I get: # kldload miibus.ko interface miibus.1 already present in the KLD 'kernel'! kldload: can't load miibus.ko: file exists # kldload if_bfe.ko module_register: module pci/bfe already exists! Module pci/bfe failed to register: 17 module_register: module bfe/miibus already exists! Module bfe/miibus failed to register: 17 I'm not familiar at all with *BSD drivers stuff so any help will be REALLY appreciated ... cheers, Guillaume ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- -- ** The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately. ** == ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
BCM4401-B0 card error on FreeBSD 5.2.1
bge gives me exactly the same error message. And still nothing like bge0: ... in dmesg output. Try bge. On Mon, Jul 26, 2004 at 03:11:42PM +0200, Guillaume Goutaudier wrote: / Hi all, // // I'm trying to move from Linux to FreeBSD on my compaq nx5000 laptop. // The FreeBSD version I installed is 5.2.1. // // I have a problem with the integrated broadcom BCM4401-B0 NIC. // // This is not a BCM4401 but a BCM4401-B0 card (PCI ID = 0x170c), and // the bfe driver does not seem to work: // // In the dmesg output, I don't have a single line with bfe0: // Instead, all I have is: // // pci1: network, ethernet at device 14.0 (no driver attached) // // When I try to install the bfe module manually, I get: // // # kldload miibus.ko // interface miibus.1 already present in the KLD 'kernel'! // kldload: can't load miibus.ko: file exists // # kldload if_bfe.ko // module_register: module pci/bfe already exists! // Module pci/bfe failed to register: 17 // module_register: module bfe/miibus already exists! // Module bfe/miibus failed to register: 17 // // I'm not familiar at all with *BSD drivers stuff so any help will be // REALLY appreciated ... // // cheers, // // // Guillaume // / ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BCM4401-B0 card error on FreeBSD 5.2.1
You may have to build a kernel with the device bge # gig cards device bfe # 10- 100 cards entries to build the moduals, I would have thought they were with the base system. But I had to build a kernel for the bfe modual to work. Side note: The bfe entry is not in the GENERIC kernel on 4.10 but will build and work. The bge modual would not find my broadcom 4401. On Mon, Jul 26, 2004 at 05:00:39PM +0200, Guillaume Goutaudier wrote: bge gives me exactly the same error message. And still nothing like bge0: ... in dmesg output. Try bge. On Mon, Jul 26, 2004 at 03:11:42PM +0200, Guillaume Goutaudier wrote: / Hi all, // // I'm trying to move from Linux to FreeBSD on my compaq nx5000 laptop. // The FreeBSD version I installed is 5.2.1. // // I have a problem with the integrated broadcom BCM4401-B0 NIC. // // This is not a BCM4401 but a BCM4401-B0 card (PCI ID = 0x170c), and // the bfe driver does not seem to work: // // In the dmesg output, I don't have a single line with bfe0: // Instead, all I have is: // // pci1: network, ethernet at device 14.0 (no driver attached) // // When I try to install the bfe module manually, I get: // // # kldload miibus.ko // interface miibus.1 already present in the KLD 'kernel'! // kldload: can't load miibus.ko: file exists // # kldload if_bfe.ko // module_register: module pci/bfe already exists! // Module pci/bfe failed to register: 17 // module_register: module bfe/miibus already exists! // Module bfe/miibus failed to register: 17 // // I'm not familiar at all with *BSD drivers stuff so any help will be // REALLY appreciated ... // // cheers, // // // Guillaume // / ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- -- ** The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately. ** == ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
