RE: BTX loader fails on Gateway ALR 9200
Please give freebsd version. Also, what other operating systems have failed to load for you? How exactly does the boot fail? Any error messages? Describe in detail. I have an abundance of information all I need to know is what to say that will help. The OS I am loading is currently FreeBSD 5.3 I went to adaptec and found some information about FreeBSD 4.11 so I tried. I can get Solaris 10 to load but it fails to find the raid as a valid drive. Fedora Core 2 also boots and says it can't find a drive. The Raid boots up fine and builds with no faults. When I install a little 850 meg IDE drive and set that to master, Still the btx loader dies. Here is what the final screen says: /boot/kernel/acpi.ko text=0x3fbfc data=0x1c04+0x112c syms=[0x4+0x72f0+0x4+0x97c7] / int=000d err= efl=00030002 eip=5755 eax=0001 ebx=0008 ecx=39ff edx=0082 esi=579c edi=e873 edi=03ba esp=037e cs=f000 ds=0040 es=f000 fs=9dc0 gs=f000 ss=9c46 cs:eip=2e 0f 01 14 0f 20 c0 0c-01 0f 22 c0 eb 00 8e db 8e c3 8e e3 8e eb 0f 20-c0 24 fc 0f 22 c0 ea 78 ss:esp=11 64 08 00 01 00 00 00-00 f0 c0 9d 02 02 51 e8 05 00 c2 ee 05 00 00 f0-00 00 1a 7d c4 5e dd e6 BTX Halted I think I copied all that correctly. Has anyone got a quick idea why this fails right off? Does this mean I need to set the same flags as what Adi Pircalabu suggested in the help !!! thread? When the boot menu appears, try this: - escape to loader prompt - set hint.acpi.0.disabled=1 - set hint.atkbd.0.flags=0x9 - boot Would this help me? In this case I'm lost here. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: BTX loader fails on Gateway ALR 9200
I have an abundance of information all I need to know is what to say that will help. The OS I am loading is currently FreeBSD 5.3 I went to adaptec and found some information about FreeBSD 4.11. I tried that version as well. I can get Solaris 10 to load but it fails to find the raid as a valid drive. Fedora Core 2 also boots and says it can't find a drive. The Raid boots up fine and builds with no faults. When I install a little 850 meg IDE drive and set that to master, Still the btx loader dies. Here is what the final screen says: /boot/kernel/acpi.ko text=0x3fbfc data=0x1c04+0x112c syms=[0x4+0x72f0+0x4+0x97c7] / int=000d err= efl=00030002 eip=5755 eax=0001 ebx=0008 ecx=39ff edx=0082 esi=579c edi=e873 edi=03ba esp=037e cs=f000 ds=0040 es=f000 fs=9dc0 gs=f000 ss=9c46 cs:eip=2e 0f 01 14 0f 20 c0 0c-01 0f 22 c0 eb 00 8e db 8e c3 8e e3 8e eb 0f 20-c0 24 fc 0f 22 c0 ea 78 ss:esp=11 64 08 00 01 00 00 00-00 f0 c0 9d 02 02 51 e8 05 00 c2 ee 05 00 00 f0-00 00 1a 7d c4 5e dd e6 BTX Halted I think I copied all that correctly. Has anyone got a quick idea why this fails right off? Does this mean I need to set the same flags as what Adi Pircalabu suggested in the help !!! thread? When the boot menu appears, try this: - escape to loader prompt - set hint.acpi.0.disabled=1 - set hint.atkbd.0.flags=0x9 - boot Would this help me? In this case I'm lost here. -Original Message- From: Craig Kleski [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 21, 2005 12:10 PM To: freebsd-questions@freebsd.org Cc: Brian Duke Subject: Re: BTX loader fails on Gateway ALR 9200 On Tuesday 21 June 2005 05:58 pm, Brian Duke wrote: The BTX loader fails right after the initial setup screen. I have : Gateway ALR 9200 4 processor xeon 500's 1 gig ram 1 adaptec 3200S scsi card running modified raid 5 6 drives. 2 sets of striped 3 and mirrored. I am having a difficult time finding anything that will load in this box. I prefer FreeBSD if possible. I've googled for a couple days and didn't find much help. Can someone help me get past this first hurdle? Brian Duke Blue Incorporated. Please give freebsd version. Also, what other operating systems have failed to load for you? How exactly does the boot fail? Any error messages? Describe in detail. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
BTX loader fails on Gateway ALR 9200
I have an abundance of information all I need to know is what to say that will help. The OS I am loading is currently FreeBSD 5.3 I went to adaptec and found some information about FreeBSD 4.11. I tried that version as well. I can get Solaris 10 to load but it fails to find the raid as a valid drive. Fedora Core 2 also boots and says it can't find a drive. The Raid boots up fine and builds with no faults. When I install a little 850 meg IDE drive and set that to master, Still the btx loader dies. Here is what the final screen says: /boot/kernel/acpi.ko text=0x3fbfc data=0x1c04+0x112c syms=[0x4+0x72f0+0x4+0x97c7] / int=000d err= efl=00030002 eip=5755 eax=0001 ebx=0008 ecx=39ff edx=0082 esi=579c edi=e873 edi=03ba esp=037e cs=f000 ds=0040 es=f000 fs=9dc0 gs=f000 ss=9c46 cs:eip=2e 0f 01 14 0f 20 c0 0c-01 0f 22 c0 eb 00 8e db 8e c3 8e e3 8e eb 0f 20-c0 24 fc 0f 22 c0 ea 78 ss:esp=11 64 08 00 01 00 00 00-00 f0 c0 9d 02 02 51 e8 05 00 c2 ee 05 00 00 f0-00 00 1a 7d c4 5e dd e6 BTX Halted I think I copied all that correctly. Has anyone got a quick idea why this fails right off? Does this mean I need to set the same flags as what Adi Pircalabu suggested in the help !!! thread? When the boot menu appears, try this: - escape to loader prompt - set hint.acpi.0.disabled=1 - set hint.atkbd.0.flags=0x9 - boot Would this help me? In this case I'm lost here. -Original Message- From: Craig Kleski [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 21, 2005 12:10 PM To: freebsd-questions@freebsd.org Cc: Brian Duke Subject: Re: BTX loader fails on Gateway ALR 9200 On Tuesday 21 June 2005 05:58 pm, Brian Duke wrote: The BTX loader fails right after the initial setup screen. I have : Gateway ALR 9200 4 processor xeon 500's 1 gig ram 1 adaptec 3200S scsi card running modified raid 5 6 drives. 2 sets of striped 3 and mirrored. I am having a difficult time finding anything that will load in this box. I prefer FreeBSD if possible. I've googled for a couple days and didn't find much help. Can someone help me get past this first hurdle? Brian Duke Blue Incorporated. Please give freebsd version. Also, what other operating systems have failed to load for you? How exactly does the boot fail? Any error messages? Describe in detail. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
BTX loader fails on Gateway ALR 9200
The BTX loader fails right after the initial setup screen. I have : Gateway ALR 9200 4 processor xeon 500's 1 gig ram 1 adaptec 3200S scsi card running modified raid 5 6 drives. 2 sets of striped 3 and mirrored. I am having a difficult time finding anything that will load in this box. I prefer FreeBSD if possible. I've googled for a couple days and didn't find much help. Can someone help me get past this first hurdle? Brian Duke Blue Incorporated. -=-_-==--=_-=┐ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BTX loader fails on Gateway ALR 9200
On Tuesday 21 June 2005 05:58 pm, Brian Duke wrote: The BTX loader fails right after the initial setup screen. I have : Gateway ALR 9200 4 processor xeon 500's 1 gig ram 1 adaptec 3200S scsi card running modified raid 5 6 drives. 2 sets of striped 3 and mirrored. I am having a difficult time finding anything that will load in this box. I prefer FreeBSD if possible. I've googled for a couple days and didn't find much help. Can someone help me get past this first hurdle? Brian Duke Blue Incorporated. Please give freebsd version. Also, what other operating systems have failed to load for you? How exactly does the boot fail? Any error messages? Describe in detail. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: BTX loader fails on Gateway ALR 9200
Please give freebsd version. Also, what other operating systems have failed to load for you? How exactly does the boot fail? Any error messages? Describe in detail. I have an abundance of information all I need to know is what to say that will help. The OS I am loading is currently FreeBSD 5.3 I went to adaptec and found some information about FreeBSD 4.11 so I tried. I can get Solaris 10 to load but it fails to find the raid as a valid drive. Fedora Core 2 also boots and says it can't find a drive. The Raid boots up fine and builds with no faults. When I install a little 850 meg IDE drive and set that to master, Still the btx loader dies. Here is what the final screen says: /boot/kernel/acpi.ko text=0x3fbfc data=0x1c04+0x112c syms=[0x4+0x72f0+0x4+0x97c7] / int=000d err= efl=00030002 eip=5755 eax=0001 ebx=0008 ecx=39ff edx=0082 esi=579c edi=e873 edi=03ba esp=037e cs=f000 ds=0040 es=f000 fs=9dc0 gs=f000 ss=9c46 cs:eip=2e 0f 01 14 0f 20 c0 0c-01 0f 22 c0 eb 00 8e db 8e c3 8e e3 8e eb 0f 20-c0 24 fc 0f 22 c0 ea 78 ss:esp=11 64 08 00 01 00 00 00-00 f0 c0 9d 02 02 51 e8 05 00 c2 ee 05 00 00 f0-00 00 1a 7d c4 5e dd e6 BTX Halted I think I copied all that correctly. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
