Re: CARP and freebsd
On 3 September 2010 10:37, gahn wrote: > Is carp a part of freebsd 8.1? or I have to download from somewhere and > install it? Everything you could want to know about CARP and FreeBSD: http://www.freebsd.org/doc/handbook/carp.html On my 8.1 box - fbsdsroute0# sysctl net.inet.carp.allow sysctl: unknown oid 'net.inet.carp.allow' So I can't say for certain but I would hazard the guess that it is not included in the GENERIC kernel. Alas, there is documentation for rebuilding your kernel, too: http://www.freebsd.org/doc/handbook/kernelconfig.html kmw ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: CARP and freebsd
> Hi, all: > > Is carp a part of freebsd 8.1? or I have to download from somewhere and > install it? > > Thanks in advance > > > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscr...@freebsd.org" > The FreeBSD hand book says: To enable support for CARP, the FreeBSD kernel must be rebuilt with the following option: device carp (http://www.freebsd.org/doc/handbook/carp.html) It's indicated as covering FreeBSD 7.3-RELEASE and FreeBSD 8.1-RELEASE so you should be OK. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
CARP and freebsd
Hi, all: Is carp a part of freebsd 8.1? or I have to download from somewhere and install it? Thanks in advance ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: CARP and FreeBSD 6.3
Am Donnerstag, den 24.01.2008, 22:45 -0800 schrieb shinny knight: > Rakhesh Sasidharan <[EMAIL PROTECTED]> wrote: > > Hi, > > > > I have two machines. Each have two interfaces, xl0 and fxp0. And each have > > two carp interfaces -- carp1 (xl0 of both) and carp2 (fxp0 of both). One of > > the machines is master, the other is backup. > > > > I also have the following sysctl set: net.inet.carp.preempt -> 1 > > > > My understanding is that if I down one of the interfaces on the master > > machine (say ''ifconfig xl0 down''), then both carp interfaces on the > > master > > will be marked as down. And the backup will become the new master. Later, > > when the interface is marked up (''ifconfig xl0 up''), the old master will > > resume control. This is my understanding and that's how things were till > > yesterday (when I was on FreeBSD 6.2/i386 with both machines). > > > > Today morning I upgraded both machines to FreeBSD 6.3 and that does not > > seem > > to be the case any more. > > > > Now, on the master machine when I down the xl0 interface, only carp1 (the > > group containing xl0) goes into init state (and the other machine's carp1 > > interface becomes the new master). Ditto for fxp0 and carp2. So in essence, > > the net.inet.carp.preempt=1 sysctl does not seem to be working as expected > > which is unlike how things were in FreeBSD 6.2. > > > > Has something changed with regards to carp between FreeBSD 6.2 and 6.3? Any > > one else encountering a similar problem? > > I happened to reboot the machines now while sitting at the console. And I > noticed that the master machine emits an error like ''carp2: incorrect > hash'' while booting up. Checking the console logs showed me that the > errors have been appearing ever since I upgraded the machine. Most of the > times it was to do with carp2, once it was to do with carp1. > > Here's the relevant bits of my rc.conf file from the master machine. > > ---8<-- > ifconfig_fxp0="inet 192.168.10.10 netmask 255.255.255.0 polling" > ifconfig_fxp0_alias0="inet 192.168.10.11 netmask 255.255.255.255" > > ifconfig_xl0="inet 192.168.20.20 netmask 255.255.255.0 polling" > > cloned_interfaces="carp1 carp2" > ifconfig_carp1="vhid 1 pass password advskew 0 192.168.10.2 netmask > 255.255.255.0" > ifconfig_carp2_alias0="vhid 2 pass password advskew 0 192.168.20.1 netmask > 255.255.255.0" > ifconfig_carp2_alias1="vhid 2 pass password advskew 0 192.168.20.2 netmask > 255.255.255.0" > ---8<-- > > Its the same on the backup machine, except for the different IPs for fxp0 > and xl0. > > Thanks, > Rakhesh > > --- > http://rakhesh.net/ > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > Hello Rakhesh, > > I never had hash errors on startup for CARP, but for demote, promote you > should try /usr/ports/net/ifstated. It's working fine for me. > > > > Best Regards, > Catalin Any news on this ? I see the same problem on our freebsd + pf + carp installation... Cheers, Norman ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CARP and FreeBSD 6.3: is it working for someone?
Sorry to step in this way... I was planning to upgrade a 6.2/amd64 SMP box to 6.3, hoping I could rid myself of those deadlocks that are still occasionally plaguing that server. Now I read this thread and stopped, since I'm also using CARP on that one. Can someone confirm CARP works on 6.3 for them? bye & Thanks av. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CARP and FreeBSD 6.3
Rakhesh Sasidharan <[EMAIL PROTECTED]> wrote: > Hi, > > I have two machines. Each have two interfaces, xl0 and fxp0. And each have > two carp interfaces -- carp1 (xl0 of both) and carp2 (fxp0 of both). One of > the machines is master, the other is backup. > > I also have the following sysctl set: net.inet.carp.preempt -> 1 > > My understanding is that if I down one of the interfaces on the master > machine (say ''ifconfig xl0 down''), then both carp interfaces on the master > will be marked as down. And the backup will become the new master. Later, > when the interface is marked up (''ifconfig xl0 up''), the old master will > resume control. This is my understanding and that's how things were till > yesterday (when I was on FreeBSD 6.2/i386 with both machines). > > Today morning I upgraded both machines to FreeBSD 6.3 and that does not seem > to be the case any more. > > Now, on the master machine when I down the xl0 interface, only carp1 (the > group containing xl0) goes into init state (and the other machine's carp1 > interface becomes the new master). Ditto for fxp0 and carp2. So in essence, > the net.inet.carp.preempt=1 sysctl does not seem to be working as expected > which is unlike how things were in FreeBSD 6.2. > > Has something changed with regards to carp between FreeBSD 6.2 and 6.3? Any > one else encountering a similar problem? I happened to reboot the machines now while sitting at the console. And I noticed that the master machine emits an error like ''carp2: incorrect hash'' while booting up. Checking the console logs showed me that the errors have been appearing ever since I upgraded the machine. Most of the times it was to do with carp2, once it was to do with carp1. Here's the relevant bits of my rc.conf file from the master machine. ---8<-- ifconfig_fxp0="inet 192.168.10.10 netmask 255.255.255.0 polling" ifconfig_fxp0_alias0="inet 192.168.10.11 netmask 255.255.255.255" ifconfig_xl0="inet 192.168.20.20 netmask 255.255.255.0 polling" cloned_interfaces="carp1 carp2" ifconfig_carp1="vhid 1 pass password advskew 0 192.168.10.2 netmask 255.255.255.0" ifconfig_carp2_alias0="vhid 2 pass password advskew 0 192.168.20.1 netmask 255.255.255.0" ifconfig_carp2_alias1="vhid 2 pass password advskew 0 192.168.20.2 netmask 255.255.255.0" ---8<-- Its the same on the backup machine, except for the different IPs for fxp0 and xl0. Thanks, Rakhesh --- http://rakhesh.net/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" Hello Rakhesh, I never had hash errors on startup for CARP, but for demote, promote you should try /usr/ports/net/ifstated. It's working fine for me. Best Regards, Catalin - Never miss a thing. Make Yahoo your homepage. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CARP and FreeBSD 6.3
Hi, I have two machines. Each have two interfaces, xl0 and fxp0. And each have two carp interfaces -- carp1 (xl0 of both) and carp2 (fxp0 of both). One of the machines is master, the other is backup. I also have the following sysctl set: net.inet.carp.preempt -> 1 My understanding is that if I down one of the interfaces on the master machine (say ''ifconfig xl0 down''), then both carp interfaces on the master will be marked as down. And the backup will become the new master. Later, when the interface is marked up (''ifconfig xl0 up''), the old master will resume control. This is my understanding and that's how things were till yesterday (when I was on FreeBSD 6.2/i386 with both machines). Today morning I upgraded both machines to FreeBSD 6.3 and that does not seem to be the case any more. Now, on the master machine when I down the xl0 interface, only carp1 (the group containing xl0) goes into init state (and the other machine's carp1 interface becomes the new master). Ditto for fxp0 and carp2. So in essence, the net.inet.carp.preempt=1 sysctl does not seem to be working as expected which is unlike how things were in FreeBSD 6.2. Has something changed with regards to carp between FreeBSD 6.2 and 6.3? Any one else encountering a similar problem? I happened to reboot the machines now while sitting at the console. And I noticed that the master machine emits an error like ''carp2: incorrect hash'' while booting up. Checking the console logs showed me that the errors have been appearing ever since I upgraded the machine. Most of the times it was to do with carp2, once it was to do with carp1. Here's the relevant bits of my rc.conf file from the master machine. ---8<-- ifconfig_fxp0="inet 192.168.10.10 netmask 255.255.255.0 polling" ifconfig_fxp0_alias0="inet 192.168.10.11 netmask 255.255.255.255" ifconfig_xl0="inet 192.168.20.20 netmask 255.255.255.0 polling" cloned_interfaces="carp1 carp2" ifconfig_carp1="vhid 1 pass password advskew 0 192.168.10.2 netmask 255.255.255.0" ifconfig_carp2_alias0="vhid 2 pass password advskew 0 192.168.20.1 netmask 255.255.255.0" ifconfig_carp2_alias1="vhid 2 pass password advskew 0 192.168.20.2 netmask 255.255.255.0" ---8<-- Its the same on the backup machine, except for the different IPs for fxp0 and xl0. Thanks, Rakhesh --- http://rakhesh.net/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
CARP and FreeBSD 6.3
Hi, I have two machines. Each have two interfaces, xl0 and fxp0. And each have two carp interfaces -- carp1 (xl0 of both) and carp2 (fxp0 of both). One of the machines is master, the other is backup. I also have the following sysctl set: net.inet.carp.preempt -> 1 My understanding is that if I down one of the interfaces on the master machine (say ''ifconfig xl0 down''), then both carp interfaces on the master will be marked as down. And the backup will become the new master. Later, when the interface is marked up (''ifconfig xl0 up''), the old master will resume control. This is my understanding and that's how things were till yesterday (when I was on FreeBSD 6.2/i386 with both machines). Today morning I upgraded both machines to FreeBSD 6.3 and that does not seem to be the case any more. Now, on the master machine when I down the xl0 interface, only carp1 (the group containing xl0) goes into init state (and the other machine's carp1 interface becomes the new master). Ditto for fxp0 and carp2. So in essence, the net.inet.carp.preempt=1 sysctl does not seem to be working as expected which is unlike how things were in FreeBSD 6.2. Has something changed with regards to carp between FreeBSD 6.2 and 6.3? Any one else encountering a similar problem? Thanks, Rakhesh --- http://rakhesh.net/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CARP and FreeBSD
On Thursday 08 March 2007 08:59, Elliot Finley wrote: > Hello, > > Is CARP functional in FreeBSD 6.x? > > I'm not able to find any docs on it in the Handbook or by doing a site > restricted search on google. there you go then. http://www.freebsd.org/cgi/man.cgi?query=carp Nikos ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
CARP and FreeBSD
Hello, Is CARP functional in FreeBSD 6.x? I'm not able to find any docs on it in the Handbook or by doing a site restricted search on google. TIA for any pointers. Elliot Finley ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"