Re: Dell PERC5 (SAS 5) controller boot flr

[Thomas Kindig]

At 03:00 PM 12/22/2006, Paul Schmehl wrote:
--On December 22, 2006 8:51:43 AM -0700 Thomas Kindig 
<[EMAIL PROTECTED]> wrote:




I'm not clear on why you have PERC5/i with only one drive.  Is the 
drive partitioned and set up with RAID1?


I was thinking I might avoid proprietary controller problems by 
specifying a PE 1950 system with no HW RAID. Second mistake was not 
studying the HW list myownself. I got the same controller, no RAID, 
and now I learn that many shops are running FreeBSD fine on this 
controller with multiple drives and RAID.


I am hoping to remedy the situation by ordering a second drive and 
enabling, setting up RAID0.



'Hope this helps,
Thomas
WSFCU Help Desk
505-647-4578

A friendly reminder to our members: you should not use regular email 
for confidential information. The Credit Union will not use regular 
email for sensitive information. Your privacy is very important to 
us. Help us protect your privacy by using secure channels whenever 
you need to exchange confidential information. See 
Email and your 
privacy for more information.  


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Dell PERC5 (SAS 5) controller boot flr

[Paul Schmehl]

--On December 22, 2006 8:51:43 AM -0700 Thomas Kindig <[EMAIL PROTECTED]> 
wrote:



Drive is detected and install is successful, however on reboot the drive
drops out. Cannot boot in any mode.

This is a new Dell PowerEdge 1950 server with a single 160G ATA HD, but
with a PERC 5/i controller. I have been to the Dell Support boards, but
this OS is not supported so they are not obliged to answer.

I have the same server, except for drive size.  I had two problems 
initially.  I had to update the driver for the Broadcomm NIC to solve a 
problem with hangs that required a full reboot to fix, and I had to update 
the usb driver to get DRAC to work in a virtual console.  I never had the 
problem you describe.


[...]
mpt0:  port 0xec00-0xecff msm
0xfc000-0xfc4f,0xfc4e irq 64 at device 0.0 on pc12
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.5.12.8
[...]
ums0: Dell DRAC5, rev 1.18/0,00 not supported
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL  INC. DRAC5 VIRTUAL   MEDIA, rev 2.00/0.00, addr 4
umass1: DELL  INC. DRAC5 VIRTUAL   MEDIA, rev 2.00/0.00, addr 4
[...]
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
unknown: timeout waiting for read DRQ
bce0: link state changed to DOWN
bce1: link state changed to DOWN
acd0: CDRW  at ata0-master UDMA33

I'm not clear on why you have PERC5/i with only one drive.  Is the drive 
partitioned and set up with RAID1?


Here's what I see in dmesg:

ums0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL  INC. DRAC5 VIRTUAL  MEDIA, rev 2.00/0.00, addr 4
umass1: DELL  INC. DRAC5 VIRTUAL  MEDIA, rev 2.00/0.00, addr 4
umass2: DELL  INC. DRAC5 VIRTUAL  MEDIA, rev 2.00/0.00, addr 4

mfid0:  on mfi0
mfid0: 69375MB (142082047 sectors) RAID

bce0:  mem 
0xf400-0xf

5ff irq 16 at device 0.0 on pci9
bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus0:  on bce0
brgphy0:  on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX

-FDX, auto
bce0: Ethernet address: 00:13:72:fb:2a:ad

Paul Schmehl ([EMAIL PROTECTED])
Senior Information Security Analyst
The University of Texas at Dallas
http://www.utdallas.edu/ir/security/

Dell PERC5 (SAS 5) controller boot flr

[Thomas Kindig]

Drive is detected and install is successful, however on reboot the 
drive drops out. Cannot boot in any mode.


This is a new Dell PowerEdge 1950 server with a single 160G ATA HD, 
but with a PERC 5/i controller. I have been to the Dell Support 
boards, but this OS is not supported so they are not obliged to answer.


boot -s fails at the same point. Safe mode gets me to a frozen login 
prompt. I see the DRAC 5 Virtual Media drives listed during the boot, 
but I am not sure how to get a trace of the boot sequence to supply 
here, given the fact that I never mount a file system.



Dell SAS 5 Host Bus Adaptor BIOS
MPTBIOS - 6.06.00.02 2006.04.05
LSI Logic Corp.


HBA   ID  LUN  VENDOR  PRODUCTREVISION   CAPACITY
 ___ ___ ___ ___ __  ___
000 ATA  ST3160812AS J152587 MB
000 DPBACKPLANE  1.00
0 LSILogicSAS1860-IT8.06.48.00


Dell Corp. MPT boot ROM successfully installed!


[...]
mpt0:  port 0xec00-0xecff msm 
0xfc000-0xfc4f,0xfc4e irq 64 at device 0.0 on pc12

mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.5.12.8
[...]
ums0: Dell DRAC5, rev 1.18/0,00 not supported
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL  INC. DRAC5 VIRTUAL   MEDIA, rev 2.00/0.00, addr 4
umass1: DELL  INC. DRAC5 VIRTUAL   MEDIA, rev 2.00/0.00, addr 4
[...]
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
unknown: timeout waiting for read DRQ
bce0: link state changed to DOWN
bce1: link state changed to DOWN
acd0: CDRW  at ata0-master UDMA33


(Sorry for the truncated details, but I shot a video and typed in the 
parts that seem most relevant).



Dropping to boot prompt I list the loaded modules and see


[...] mpt_raid.1 mpt.1 mpt_cam.1 mpt_core.1 [...]


For grins, loaded mfi, boot -s, same result.


Thomas Kindig
Technology Support
White Sands Federal Credit Union
505-647-4578

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"