Re: Finding Drivers For winWiFi Card
On 1/24/2010 12:00 AM, Warren Block wrote: On Sat, 23 Jan 2010, Programmer In Training wrote: This is probably the wrong place to ask, and if it is I ask your forgiveness. I'm browsing the FTP server for FreeBSD-8.0 packages[0] and am looking for drivers for my winWiFi card (zonenet, unsure of chipset currently) and realized, I'm not sure what package I would need for that. Post the model number of the Zonet card. Is it PCI or USB? You could try just loading all of the wireless kernel modules and seeing if any of them find the hardware. There's a list of those in the See Also section for wlan(4). -Warren Block * Rapid City, South Dakota USA I'm going to have to do that because the one provided by the company that put out the card are for FreeBSD 7.0. I tried using it anyway and the moment I went to load the kernel, it caused my computer to reboot without warning. It's PCI and I have no clue as to the model number anymore. -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Re: Finding Drivers For winWiFi Card
On 1/23/2010 10:51 PM, Polytropon wrote: On Sat, 23 Jan 2010 22:35:32 -0600, Programmer In Training p...@joseph-a-nagy-jr.us wrote: I hope ifconfig will help more then dmesg as I have no way of getting files (like dmesg.log that I created) off the box (floppy drive isn't even hooked up, IIRC) and rl0 is my wired NIC, non-internal. The ifconfig program (often used as ifconfig -a) tells you only about NICs that are already connected to a driver. Most wireless NICs require loading a specific kernel module (which is not in the GENERIC kernel), and therefore it's helpful to know what exact model it is, so you can load the correct driver. There are of course programs that help you with this: pciconf -lv and usbdevs -v are common tools snip Thanks, this probably wouldn't be such an issue if I hadn't thrown away the box two-three weeks ago (at least, I think I threw it out; I've had the card for about a two years). no...@pci0:2:2:0: class 0x2 card=0x1faa11ab chip=0x00351033 rev=0x43 hdr=0x00 vendor = 'Marvell Semiconductor (Was: Galileo Technology LLC)' device = 'Marvell Libertas 02.llb/g Wireless (8335)' class = network subclass = ethernet I can't find any wlan modules in /boot/kernel that aren't already loaded. P.S.: I'm subscribed to the list, no need to CC me. -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Re: Finding Drivers For winWiFi Card
On Sun, Jan 24, 2010 at 05:31:53AM -0600, Programmer In Training wrote: Thanks, this probably wouldn't be such an issue if I hadn't thrown away the box two-three weeks ago (at least, I think I threw it out; I've had the card for about a two years). no...@pci0:2:2:0: class 0x2 card=0x1faa11ab chip=0x00351033 rev=0x43 hdr=0x00 vendor = 'Marvell Semiconductor (Was: Galileo Technology LLC)' device = 'Marvell Libertas 02.llb/g Wireless (8335)' class = network subclass = ethernet zgrep Libertas /usr/share/man/man4/* /usr/share/man/man4/if_malo.4.gz:.Nd Marvell Libertas IEEE 802.11b/g wireless network driver So go and read if_malo(4). It looks like your card is supported, but you need to download a firmware package. This driver was added in 7.1, according to the manpage. Roland -- R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725) pgpqDkPTXuf6t.pgp Description: PGP signature
Re: Finding Drivers For winWiFi Card
Do not CC me. I am subscribed to the list. There is no need. THANK YOU. On 1/24/2010 6:22 AM, Roland Smith wrote: snip zgrep Libertas /usr/share/man/man4/* /usr/share/man/man4/if_malo.4.gz:.Nd Marvell Libertas IEEE 802.11b/g wireless network driver So go and read if_malo(4). It looks like your card is supported, but you need to download a firmware package. This driver was added in 7.1, according to the manpage. Roland Thanks. -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Re: Finding Drivers For winWiFi Card
On 1/24/2010 6:27 AM, Programmer In Training wrote: Do not CC me. I am subscribed to the list. There is no need. THANK YOU. On 1/24/2010 6:22 AM, Roland Smith wrote: snip zgrep Libertas /usr/share/man/man4/* /usr/share/man/man4/if_malo.4.gz:.Nd Marvell Libertas IEEE 802.11b/g wireless network driver So go and read if_malo(4). It looks like your card is supported, but you need to download a firmware package. This driver was added in 7.1, according to the manpage. Roland Thanks. Thanks for the help folks. I've found everything I need, I believe, now to just do what needs to be done. I'll post here later on today, after I've burned the file to disc (no floppy drive on either computer). -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Re: Finding Drivers For winWiFi Card
On Sun, 24 Jan 2010 07:13:05 -0600, Programmer In Training p...@joseph-a-nagy-jr.us wrote: I'll post here later on today, after I've burned the file to disc (no floppy drive on either computer). No possibility to transfer the file via wired network? Your RealTek NIC works out of the box. Or maybe use an USB stick? -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Finding Drivers For winWiFi Card
On 1/24/2010 6:35 PM, Polytropon wrote: On Sun, 24 Jan 2010 07:13:05 -0600, Programmer In Training p...@joseph-a-nagy-jr.us wrote: I'll post here later on today, after I've burned the file to disc (no floppy drive on either computer). No possibility to transfer the file via wired network? Your RealTek NIC works out of the box. Or maybe use an USB stick? No. Right now I'd have to move the box halfway across the house into a room that's already too crammed for what's in there. I have considered just running the cable, but I'd have to do so on a day my 3 year old nephew isn't home (one home, 8 people, don't ask) or risk all sorts of problems (nephew tripping and hurting self (biggest concern), nephew tripping and ripping out the cable from the connector, nephew tripping and damaging the router (which would kill entire home network), dogs doing same thing). No floppy disk drive, so only safe option is to burn a CD. IF I can do the run-to-router-with-CAT5 option, that would be ideal (and then there would be no issue, I'd be installing ports like mad until I had the system set up the way I want). -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Re: Finding Drivers For winWiFi Card
On 1/24/2010 9:55 PM, Programmer In Training wrote: On 1/24/2010 6:35 PM, Polytropon wrote: On Sun, 24 Jan 2010 07:13:05 -0600, Programmer In Training p...@joseph-a-nagy-jr.us wrote: I'll post here later on today, after I've burned the file to disc (no floppy drive on either computer). No possibility to transfer the file via wired network? Your RealTek NIC works out of the box. Or maybe use an USB stick? snip Forgot to mention, I don't own a USB Stick (yet). I intend to get about two dozen 4GB models when I can (so I can start distributing my PGP Pub Key in person with others so I can say I fully trust them and that key and vice-versa, important for taking steps in doing other verification for products like the Pidgin plugin, OTR (Off-the-Record)). -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Finding Drivers For winWiFi Card
This is probably the wrong place to ask, and if it is I ask your forgiveness. I'm browsing the FTP server for FreeBSD-8.0 packages[0] and am looking for drivers for my winWiFi card (zonenet, unsure of chipset currently) and realized, I'm not sure what package I would need for that. I didn't set up eth0 (wired NIC, realtek) as that would mean lugging my box halfway across the house into a room with no room in it for me and my box. I figured I could just set my wireless card up after install, not thinking I wouldn't have a clue as to what I'm doing. Any clues as to what part of the FTP server I should be looking in? I'm looking at the packages under net/ but looking at them they all seem to be for someone with a working connection (icecast, nbd-server, etc). Thoughts? [0]: ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-8.0-release/ -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Re: Finding Drivers For winWiFi Card
Programmer In Training wrote: This is probably the wrong place to ask, and if it is I ask your forgiveness. Nope, this is the right place. I'm browsing the FTP server for FreeBSD-8.0 packages[0] and am looking for drivers for my winWiFi card (zonenet, unsure of chipset currently) and realized, I'm not sure what package I would need for that. I didn't set up eth0 (wired NIC, realtek) as that would mean lugging my box halfway across the house into a room with no room in it for me and my box. I figured I could just set my wireless card up after install, not thinking I wouldn't have a clue as to what I'm doing. That is the wrong place. :) What is listed with ifconfig(8)? That will help determine the driver (if it is supported). Regards, -- Glen Barber ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Finding Drivers For winWiFi Card
Glen Barber wrote: What is listed with ifconfig(8)? That will help determine the driver (if it is supported). Oops... Meant to say dmesg; perhaps ifconfig will help as well, though. Regards, -- Glen Barber ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Finding Drivers For winWiFi Card
On 1/23/2010 10:05 PM, Glen Barber wrote: Programmer In Training wrote: This is probably the wrong place to ask, and if it is I ask your forgiveness. Nope, this is the right place. Awesome I'm browsing the FTP server for FreeBSD-8.0 packages[0] and am looking for drivers for my winWiFi card (zonenet, unsure of chipset currently) and realized, I'm not sure what package I would need for that. I didn't set up eth0 (wired NIC, realtek) as that would mean lugging my box halfway across the house into a room with no room in it for me and my box. I figured I could just set my wireless card up after install, not thinking I wouldn't have a clue as to what I'm doing. That is the wrong place. :) Which is OK. At least I only downloaded a dozen files. ;) What is listed with ifconfig(8)? That will help determine the driver (if it is supported). (this is all typed out so please excuse typos) #ifconfig rl0: flags=8802BROADCAST,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8VLAN_MTU ether 00:40:ca:35:6c:09 media: ethernet autoselect status: no carrier plip0: flags=8810POINTTOPOINT,SIMPLEX,MULTICAST metric 0 mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 options=3RXCSUM,TXCSUM inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 [I am absolutely sure that percent sign is correct] inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 Should I assume that rl0 is the wireless? I'm not sure what plip0 is and I know lo0 is my wired nic. -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Re: Finding Drivers For winWiFi Card
On 1/23/2010 10:07 PM, Glen Barber wrote: Glen Barber wrote: What is listed with ifconfig(8)? That will help determine the driver (if it is supported). Oops... Meant to say dmesg; perhaps ifconfig will help as well, though. Regards, I hope ifconfig will help more then dmesg as I have no way of getting files (like dmesg.log that I created) off the box (floppy drive isn't even hooked up, IIRC) and rl0 is my wired NIC, non-internal. -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Re: Finding Drivers For winWiFi Card
On 1/23/2010 10:26 PM, Programmer In Training wrote: snip #ifconfig rl0: flags=8802BROADCAST,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8VLAN_MTU ether 00:40:ca:35:6c:09 media: ethernet autoselect status: no carrier plip0: flags=8810POINTTOPOINT,SIMPLEX,MULTICAST metric 0 mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 options=3RXCSUM,TXCSUM inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 [I am absolutely sure that percent sign is correct] inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 Should I assume that rl0 is the wireless? I'm not sure what plip0 is and I know lo0 is my wired nic. Haha, assumptions rock. Not. rl0 is my wired NIC. -- PIT Emails are not formal business letters, whatever businesses may want. signature.asc Description: OpenPGP digital signature
Re: Finding Drivers For winWiFi Card
Programmer In Training wrote: On 1/23/2010 10:05 PM, Glen Barber wrote: [huge snip] Should I assume that rl0 is the wireless? I'm not sure what plip0 is and I know lo0 is my wired nic. rl0 is your physical NIC, lo0 is the loopback. From your other reply, I think you already noticed that. Try this, paying particular attention to any lines beginning with 'none': pciconf -lv Regards, -- Glen Barber ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Finding Drivers For winWiFi Card
On Sat, 23 Jan 2010 22:26:33 -0600, Programmer In Training p...@joseph-a-nagy-jr.us wrote: [...] set up eth0 (wired NIC, realtek) as that would mean lugging my box halfway across the house into a room with no room in it for me and my [...] [...] #ifconfig rl0: flags=8802BROADCAST,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8VLAN_MTU ether 00:40:ca:35:6c:09 media: ethernet autoselect status: no carrier plip0: flags=8810POINTTOPOINT,SIMPLEX,MULTICAST metric 0 mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 options=3RXCSUM,TXCSUM inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 [I am absolutely sure that percent sign is correct] inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 Should I assume that rl0 is the wireless? I'm not sure what plip0 is and I know lo0 is my wired nic. You've already given the correct answer: Realtek wired NIC. This the rl driver; eth is a Linuxism, in FreeBSD every NIC, wireless or wired, is represented by a device file named after the driver. If you're not sure what something is, try FreeBSD's excellent manpage system. You'll be surprised how much information is in there, in opposite to many Linusi: % whatis lo lo(4)- software loopback network interface The lo0 is NOT your wired NIC. That's this one: % whatis rl rl(4)- RealTek 8129/8139 Fast Ethernet device driver You can access information about nearly everything in FreeBSD via the apropos, whatis and man commands - be it system binaries, library functions, kernel calls, configuration files, maintenance procedures and misc. documentation topics. So THAT's awesome! :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Finding Drivers For winWiFi Card
Polytropon wrote: On Sat, 23 Jan 2010 22:26:33 -0600, Programmer In Training p...@joseph-a-nagy-jr.us wrote: [...] set up eth0 (wired NIC, realtek) as that would mean lugging my box halfway across the house into a room with no room in it for me and my [...] [...] You've already given the correct answer: Realtek wired NIC. This the rl driver; eth is a Linuxism, in FreeBSD every NIC, wireless or wired, is represented by a device file named after the driver. I believe the intent is to use the integrated wireless chipset, not the ethernet. Regards, -- Glen Barber ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Finding Drivers For winWiFi Card
On Sat, 23 Jan 2010 22:35:32 -0600, Programmer In Training p...@joseph-a-nagy-jr.us wrote: I hope ifconfig will help more then dmesg as I have no way of getting files (like dmesg.log that I created) off the box (floppy drive isn't even hooked up, IIRC) and rl0 is my wired NIC, non-internal. The ifconfig program (often used as ifconfig -a) tells you only about NICs that are already connected to a driver. Most wireless NICs require loading a specific kernel module (which is not in the GENERIC kernel), and therefore it's helpful to know what exact model it is, so you can load the correct driver. There are of course programs that help you with this: pciconf -lv and usbdevs -v are common tools for this particular tasks. As soon as you can tell what the name of the wireless NIC is, you can check which driver it needs and the load it, e. g. with kldload if_bge.ko, where bge is the name of the driver (remember to check man bge to see what it is intended for). As soon as you've loaded it, dmesg will show its existance and ifconfig -a will print its settings. PS. The plip0 interface is the printer port Internet Protocol driver. -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Finding Drivers For winWiFi Card
On Sat, 23 Jan 2010 23:45:38 -0500, Glen Barber glen.j.bar...@gmail.com wrote: I believe the intent is to use the integrated wireless chipset, not the ethernet. I see, I just wanted to point out a Linuxism that could lead to misunderstandings, as well as to mention FreeBSD's excellent documentation in this context. :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Finding Drivers For winWiFi Card
On Sat, 23 Jan 2010, Programmer In Training wrote: This is probably the wrong place to ask, and if it is I ask your forgiveness. I'm browsing the FTP server for FreeBSD-8.0 packages[0] and am looking for drivers for my winWiFi card (zonenet, unsure of chipset currently) and realized, I'm not sure what package I would need for that. Post the model number of the Zonet card. Is it PCI or USB? You could try just loading all of the wireless kernel modules and seeing if any of them find the hardware. There's a list of those in the See Also section for wlan(4). -Warren Block * Rapid City, South Dakota USA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
