Re: FreeBSD 5.5 hangs on boot when pluging mouse/Intel Gigabit
Hi, I am in process of upgrading a serie of servers from 4.11 to 5.5 (and them 6.2). I am on the 5.5 phase. I did 2 machines sucessfully. On upgrading the thrid one, the boot will hang after SCSI buss reset, whenver I plug in the mouse or an Intel Pro/1000 MT Gigabit card. I don't know the reason, but in 6.2 the problem vanished. The server I am upgrading was working fine for 2 years and more. The 2 machines I did previously are the exact same mother board as the one making trouble, but the one I upgrade is 2 CPU. more RAM and a tape device. One of the 2 machines that succeded is using the same add on Intel Pro Gigabit. All machines are connected to the same KVM switch. Kernel is GENERIC from distribution. The exact place it hangs is shown in the dmesg bellow: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.5-RELEASE-p13 #2: Thu Jun 28 12:36:00 ICT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel Pentium III (800.03-MHz 686-class CPU) Origin = GenuineIntel Id = 0x686 Stepping = 6 Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 402632704 (383 MB) avail memory = 384299008 (366 MB) ACPI APIC Table: ASUS CUR-DLS ioapic0 Version 1.1 irqs 0-15 on motherboard ioapic1 Version 1.1 irqs 16-31 on motherboard npx0: math processor on motherboard npx0: INT 16 interface acpi0: ASUS CUR-DLS on motherboard acpi0: Power Button (fixed) Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: 32-bit timer at 3.579545MHz port 0xe408-0xe40b on acpi0 cpu0: ACPI CPU on acpi0 acpi_button0: Power Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 fxp0: Intel 82559 Pro/100 Ethernet port 0xd800-0xd83f mem 0xfd80-0xfd8f,0xfe00-0xfe000fff irq 20 at device 2.0 on pci0 miibus0: MII bus on fxp0 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:18:0a:97:a6 pci0: display, VGA at device 7.0 (no driver attached) isab0: PCI-ISA bridge port 0xe800-0xe80f at device 15.0 on pci0 isa0: ISA bus on isab0 atapci0: ServerWorks ROSB4 UDMA33 controller port 0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 ohci0: OHCI (generic) USB controller mem 0xfb00-0xfb000fff irq 4 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: OHCI (generic) USB controller on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: ACPI Host-PCI bridge on acpi0 pci1: ACPI PCI bus on pcib1 sym0: 896 port 0xb800-0xb8ff mem 0xfa00-0xfa001fff,0xfa80-0xfa8003ff irq 24 at device 5.0 on pci1 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym1: 896 port 0xb400-0xb4ff mem 0xf900-0xf9001fff,0xf980-0xf98003ff irq 25 at device 5.1 on pci1 sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: floppy drive controller port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fd0: 1440-KB 3.5 drive on fdc0 drive 0 orm0: ISA Option ROMs at iomem 0xd-0xd3fff,0xc-0xca7ff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter TSC frequency 800034408 Hz quality 800 Timecounters tick every 10.000 msec acd0: CDROM QSI CD-ROM SCR-242/CXAC at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. ** Hangs here * sa0 at sym1 bus 0 target 2 lun 0 sa0: TANDBERG SLR100 0402 Removable Sequential Access SCSI-2 device sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) da0 at sym0 bus 0 target 0 lun 0 da0: SEAGATE ST318436LW 0010 Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers
FreeBSD 5.5 hangs on boot when pluging mouse/Intel Gigabit
Hi, I am in process of upgrading a serie of servers from 4.11 to 5.5 (and them 6.2). I am on the 5.5 phase. I did 2 machines sucessfully. On upgrading the thrid one, the boot will hang after SCSI buss reset, whenver I plug in the mouse or an Intel Pro/1000 MT Gigabit card. The server I am upgrading was working fine for 2 years and more. The 2 machines I did previously are the exact same mother board as the one making trouble, but the one I upgrade is 2 CPU. more RAM and a tape device. One of the 2 machines that succeded is using the same add on Intel Pro Gigabit. All machines are connected to the same KVM switch. Kernel is GENERIC from distribution. The exact place it hangs is shown in the dmesg bellow: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.5-RELEASE-p13 #2: Thu Jun 28 12:36:00 ICT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel Pentium III (800.03-MHz 686-class CPU) Origin = GenuineIntel Id = 0x686 Stepping = 6 Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 402632704 (383 MB) avail memory = 384299008 (366 MB) ACPI APIC Table: ASUS CUR-DLS ioapic0 Version 1.1 irqs 0-15 on motherboard ioapic1 Version 1.1 irqs 16-31 on motherboard npx0: math processor on motherboard npx0: INT 16 interface acpi0: ASUS CUR-DLS on motherboard acpi0: Power Button (fixed) Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: 32-bit timer at 3.579545MHz port 0xe408-0xe40b on acpi0 cpu0: ACPI CPU on acpi0 acpi_button0: Power Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 fxp0: Intel 82559 Pro/100 Ethernet port 0xd800-0xd83f mem 0xfd80-0xfd8f,0xfe00-0xfe000fff irq 20 at device 2.0 on pci0 miibus0: MII bus on fxp0 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:18:0a:97:a6 pci0: display, VGA at device 7.0 (no driver attached) isab0: PCI-ISA bridge port 0xe800-0xe80f at device 15.0 on pci0 isa0: ISA bus on isab0 atapci0: ServerWorks ROSB4 UDMA33 controller port 0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 ohci0: OHCI (generic) USB controller mem 0xfb00-0xfb000fff irq 4 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: OHCI (generic) USB controller on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: ACPI Host-PCI bridge on acpi0 pci1: ACPI PCI bus on pcib1 sym0: 896 port 0xb800-0xb8ff mem 0xfa00-0xfa001fff,0xfa80-0xfa8003ff irq 24 at device 5.0 on pci1 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym1: 896 port 0xb400-0xb4ff mem 0xf900-0xf9001fff,0xf980-0xf98003ff irq 25 at device 5.1 on pci1 sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: floppy drive controller port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fd0: 1440-KB 3.5 drive on fdc0 drive 0 orm0: ISA Option ROMs at iomem 0xd-0xd3fff,0xc-0xca7ff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter TSC frequency 800034408 Hz quality 800 Timecounters tick every 10.000 msec acd0: CDROM QSI CD-ROM SCR-242/CXAC at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. ** Hangs here * sa0 at sym1 bus 0 target 2 lun 0 sa0: TANDBERG SLR100 0402 Removable Sequential Access SCSI-2 device sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) da0 at sym0 bus 0 target 0 lun 0 da0: SEAGATE ST318436LW 0010 Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 17522MB (35885168 512 byte sectors: 255H 63S/T 2233C) da1 at sym0 bus 0 target 1 lun 0 da1: SEAGATE ST318436LW 0010
