RE: FreeBSD on IBM Blade Center?
hi no, I haven't been able to use any version of FreeBSD. I did try to boot the IBM Blade on all of the available versions on ftp.freebsd.org ,, but with no success. I got some info from the internet that FreeBSD version 4.1 would work, but I tried that and it didn't work. when booting Blade from mounted iso or from cdrom install disk, I always stop in OK prompt, where I get error about the boot loader not finding kernel or device, when using the lsdev I find that the cdrom device is vanished, so there is no media to load kernel from, this happens both when trying to boot from mounted iso or the built in cdrom. I've learned that the only way to boot the system is using FreeBSD floppies, that I upload to the usb flash memory, ie. I upload boot floppy, start the system, upload the kern1.flp when the system request it and then upload the second kern floppy etc.etc. until I get the system running in sysinstall for initial setup. With that, I find that there is no hard disk available, no lun to mount from the DS400 SAN, only disk device is the USB flash memory. The ISP driver is completely broken and not able to detect any disk device from my IBM Blade Center which has Qlogic 2312 FC controller. When I contacted the IBM service for technical help on this severe problem, they informed me that this matter is 100% a FreeBSD problem, not anything that IBM should worry about, no help there. This is very bad for me, as I've used FreeBSD as the foundation for my services, have been using it since 1993, and am forced to use Gentoo which has no problems with the IBM Blade. If needed, I'm willing to work with any one that is capable on getting the IBM Blade to work and I'm also positive on giving some time for getting the FreeBSD to install and detect all hardware on my IBM Blade Center if needed. I think this is something that FreeBSD community needs to get resolved quickly... as the Blade Centers are getting more popular day by day. kveðja / Best regards Gestur -Original Message- From: fbsd_user [mailto:[EMAIL PROTECTED] Sent: 29. desember 2005 19:27 To: freebsd-questions@freebsd.org Cc: Gestur A. Grjetarsson Subject: RE: FreeBSD on IBM Blade Center? Gestur I need some clarification on your question. Are you saying that you were able to use FreeBSD on older versions of IBM BLADES or that you were able to use older FreeBSD versions before??? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jonathan Fosburgh Sent: Thursday, December 29, 2005 11:16 AM To: freebsd-questions@freebsd.org Cc: Gestur A. Grjetarsson Subject: Re: FreeBSD on IBM Blade Center? On Wednesday 28 December 2005 07:32, Gestur A. Grjetarsson wrote: > Hi > > I have IBM Blade with Qlogic 2312 adapters using DS400 SAN > > now I have learned that after over 10 years of good FreeBSD experience on > various sorts of hardware, I can't use FreeBSD anymore as it does'nt work > on IBM Blade. I have read alot on this problem trying to solve this problem > and done alot of testing and hacking but without any progress. > > so I have two questions: > > is FreeBSD going to support IBM Blade? > > if it is going to support and work on IBM Blade, can you give me an > estimation on when it will be ready to run on IBM Blade? The blade center is a bizarre beast and it is difficult to make the officially supported Operating Systems work correctly with it. We had difficulties making AIX work properly on the JS20 blade, for instance. With IBM hardware, it is best to stick with officially supported products. Sometimes, IBM doesn't support something for a reason... I would be (pleasantly) surprised to laern you were able to attach FreeBSD to IBM storage. Of course, IBM will provide you with no help in either of these, and I wouldn't venture to guess if you can do concurrent maintenance on your DS4000 with FreeBSD running. -- Jonathan Fosburgh AIX and Storage Administrator UT MD Anderson Cancer Center Houston, TX ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: FreeBSD on IBM Blade Center?
Gestur I need some clarification on your question. Are you saying that you were able to use FreeBSD on older versions of IBM BLADES or that you were able to use older FreeBSD versions before??? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jonathan Fosburgh Sent: Thursday, December 29, 2005 11:16 AM To: freebsd-questions@freebsd.org Cc: Gestur A. Grjetarsson Subject: Re: FreeBSD on IBM Blade Center? On Wednesday 28 December 2005 07:32, Gestur A. Grjetarsson wrote: > Hi > > I have IBM Blade with Qlogic 2312 adapters using DS400 SAN > > now I have learned that after over 10 years of good FreeBSD experience on > various sorts of hardware, I can't use FreeBSD anymore as it does'nt work > on IBM Blade. I have read alot on this problem trying to solve this problem > and done alot of testing and hacking but without any progress. > > so I have two questions: > > is FreeBSD going to support IBM Blade? > > if it is going to support and work on IBM Blade, can you give me an > estimation on when it will be ready to run on IBM Blade? The blade center is a bizarre beast and it is difficult to make the officially supported Operating Systems work correctly with it. We had difficulties making AIX work properly on the JS20 blade, for instance. With IBM hardware, it is best to stick with officially supported products. Sometimes, IBM doesn't support something for a reason... I would be (pleasantly) surprised to laern you were able to attach FreeBSD to IBM storage. Of course, IBM will provide you with no help in either of these, and I wouldn't venture to guess if you can do concurrent maintenance on your DS4000 with FreeBSD running. -- Jonathan Fosburgh AIX and Storage Administrator UT MD Anderson Cancer Center Houston, TX ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD on IBM Blade Center?
On Wednesday 28 December 2005 07:32, Gestur A. Grjetarsson wrote: > Hi > > I have IBM Blade with Qlogic 2312 adapters using DS400 SAN > > now I have learned that after over 10 years of good FreeBSD experience on > various sorts of hardware, I can't use FreeBSD anymore as it does'nt work > on IBM Blade. I have read alot on this problem trying to solve this problem > and done alot of testing and hacking but without any progress. > > so I have two questions: > > is FreeBSD going to support IBM Blade? > > if it is going to support and work on IBM Blade, can you give me an > estimation on when it will be ready to run on IBM Blade? The blade center is a bizarre beast and it is difficult to make the officially supported Operating Systems work correctly with it. We had difficulties making AIX work properly on the JS20 blade, for instance. With IBM hardware, it is best to stick with officially supported products. Sometimes, IBM doesn't support something for a reason... I would be (pleasantly) surprised to laern you were able to attach FreeBSD to IBM storage. Of course, IBM will provide you with no help in either of these, and I wouldn't venture to guess if you can do concurrent maintenance on your DS4000 with FreeBSD running. -- Jonathan Fosburgh AIX and Storage Administrator UT MD Anderson Cancer Center Houston, TX pgpHYYIFGgQ1g.pgp Description: PGP signature
RE: FreeBSD on IBM Blade Center?
Hi I tried using freebsd floppies ,, by using that I could boot into sysinstall ,, but the system doesn't see any disk devices other than the USB disk which is 1Mb size. I tried to use custom kernel on the floppies and tweak the ISP driver, to prevent the stall when the driver hangs during boot and get the timeout, that with no result. the isp driver which is said to support the Qlogic 2312, is broken, it doesn't work. kveðja / best regards Gestur -Original Message- From: Thomas Linton [mailto:[EMAIL PROTECTED] Sent: 28. desember 2005 15:26 To: Gestur A. Grjetarsson Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD on IBM Blade Center? I tried to boot a 6.0 Installation CD on a HS20 Blade. I always get "can't load 'kernel'" from the cdloader. If I type "lsdev" it shows me no "cd devices"; a "ls" brings "open '/' failed:.." and the LED of the cdrom-drive stays dark. The BladeCenter is using a USB-CDROM and I think this is actually the problem of booting a Blade from a freeBSD CD. Did you try a Network-Based installation? How far did you come with your installation? On Wed, Dec 28, 2005 at 01:32:44PM -, Gestur A. Grjetarsson wrote: > Hi > > I have IBM Blade with Qlogic 2312 adapters using DS400 SAN > > now I have learned that after over 10 years of good FreeBSD experience on > various sorts of hardware, I can't use FreeBSD anymore as it does'nt work on > IBM Blade. > I have read alot on this problem trying to solve this problem and done alot > of testing and hacking but without any progress. > > so I have two questions: > > is FreeBSD going to support IBM Blade? > > if it is going to support and work on IBM Blade, can you give me an > estimation on when it will be ready to run on IBM Blade? > > kveðja > Gestur > Iceland > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD on IBM Blade Center?
I tried to boot a 6.0 Installation CD on a HS20 Blade. I always get "can't load 'kernel'" from the cdloader. If I type "lsdev" it shows me no "cd devices"; a "ls" brings "open '/' failed:.." and the LED of the cdrom-drive stays dark. The BladeCenter is using a USB-CDROM and I think this is actually the problem of booting a Blade from a freeBSD CD. Did you try a Network-Based installation? How far did you come with your installation? On Wed, Dec 28, 2005 at 01:32:44PM -, Gestur A. Grjetarsson wrote: > Hi > > I have IBM Blade with Qlogic 2312 adapters using DS400 SAN > > now I have learned that after over 10 years of good FreeBSD experience on > various sorts of hardware, I can't use FreeBSD anymore as it does'nt work on > IBM Blade. > I have read alot on this problem trying to solve this problem and done alot > of testing and hacking but without any progress. > > so I have two questions: > > is FreeBSD going to support IBM Blade? > > if it is going to support and work on IBM Blade, can you give me an > estimation on when it will be ready to run on IBM Blade? > > kveðja > Gestur > Iceland > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD on IBM Blade Center?
Hi I have IBM Blade with Qlogic 2312 adapters using DS400 SAN now I have learned that after over 10 years of good FreeBSD experience on various sorts of hardware, I can't use FreeBSD anymore as it does'nt work on IBM Blade. I have read alot on this problem trying to solve this problem and done alot of testing and hacking but without any progress. so I have two questions: is FreeBSD going to support IBM Blade? if it is going to support and work on IBM Blade, can you give me an estimation on when it will be ready to run on IBM Blade? kveðja Gestur Iceland ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD on IBM blade center
Hi, is FreeBSD 5.x running on IBM blade-center? If so, does anyone have a link about information running FreeBSD on a IBM blade-center? Thanks in advance. asg ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
