Gigabit ethernet SMC Tigercard 1000
Does anyone know how to configure this. I have installed the card and connected to my switch. have noticed I now have interfaces inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto inphy1: i82555 10/100 media interface on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto not sure why listed twice...or if this even relates to the card seeing how it doesnt say 1000base-SX here is what the entire interface section looks like (from DMESG): fxp0: Intel Pro 10/100B/100+ Ethernet port 0x5400-0x543f mem 0xfb00-0xfb0f,0xfb201000-0xfb201fff irq 10 at device 3.0 on pci0 fxp0: Ethernet address 00:d0:b7:b7:66:eb inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Intel Pro 10/100B/100+ Ethernet port 0x5440-0x547f mem 0xfb10-0xfb1f,0xfb202000-0xfb202fff irq 5 at device 6.0 on pci0 fxp1: Ethernet address 00:02:b3:10:e4:13 inphy1: i82555 10/100 media interface on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Here is the output of ifconfig: fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.0.2 netmask 0xf800 broadcast 192.168.7.255 inet6 fe80::2d0:b7ff:feb7:66eb%fxp0 prefixlen 64 scopeid 0x1 ether 00:d0:b7:b7:66:eb media: Ethernet autoselect (100baseTX full-duplex) status: active fxp1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.1.1 netmask 0xff00 broadcast 192.168.1.255 inet6 fe80::202:b3ff:fe10:e413%fxp1 prefixlen 64 scopeid 0x2 ether 00:02:b3:10:e4:13 media: Ethernet autoselect (100baseTX full-duplex) status: active ppp0: flags=8010POINTOPOINT,MULTICAST mtu 1500 sl0: flags=c010POINTOPOINT,LINK2,MULTICAST mtu 552 faith0: flags=8002BROADCAST,MULTICAST mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 inet 127.0.0.1 netmask 0xff00 I am running two 100baseT nics on this box... appreciate any help. Will = Will Williams ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Gigabit ethernet SMC Tigercard 1000
ok, that was dumb, the inphy0 doesnt relate to the gig-e card...do I need to activate something in the kernel to support? Does anyone know how to configure this. I have installed the card and connected to my switch. have noticed I now have interfaces inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto inphy1: i82555 10/100 media interface on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto not sure why listed twice...or if this even relates to the card seeing how it doesnt say 1000base-SX here is what the entire interface section looks like (from DMESG): fxp0: Intel Pro 10/100B/100+ Ethernet port 0x5400-0x543f mem 0xfb00-0xfb0f,0xfb201000-0xfb201fff irq 10 at device 3.0 on pci0 fxp0: Ethernet address 00:d0:b7:b7:66:eb inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Intel Pro 10/100B/100+ Ethernet port 0x5440-0x547f mem 0xfb10-0xfb1f,0xfb202000-0xfb202fff irq 5 at device 6.0 on pci0 fxp1: Ethernet address 00:02:b3:10:e4:13 inphy1: i82555 10/100 media interface on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Here is the output of ifconfig: fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.0.2 netmask 0xf800 broadcast 192.168.7.255 inet6 fe80::2d0:b7ff:feb7:66eb%fxp0 prefixlen 64 scopeid 0x1 ether 00:d0:b7:b7:66:eb media: Ethernet autoselect (100baseTX full-duplex) status: active fxp1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.1.1 netmask 0xff00 broadcast 192.168.1.255 inet6 fe80::202:b3ff:fe10:e413%fxp1 prefixlen 64 scopeid 0x2 ether 00:02:b3:10:e4:13 media: Ethernet autoselect (100baseTX full-duplex) status: active ppp0: flags=8010POINTOPOINT,MULTICAST mtu 1500 sl0: flags=c010POINTOPOINT,LINK2,MULTICAST mtu 552 faith0: flags=8002BROADCAST,MULTICAST mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 inet 127.0.0.1 netmask 0xff00 I am running two 100baseT nics on this box... appreciate any help. Will = Will Williams ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] = Will Williams ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Gigabit ethernet SMC Tigercard 1000
God, I need to learn to read before I send...my kernel is recompiling right now with the lge device (already had the miibus device)...will see how this works then...two minutes later...yes it works now...still sending hoping it might benefit someone else... Will --- W. J. Williams [EMAIL PROTECTED] wrote: ok, that was dumb, the inphy0 doesnt relate to the gig-e card...do I need to activate something in the kernel to support? Does anyone know how to configure this. I have installed the card and connected to my switch. have noticed I now have interfaces inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto inphy1: i82555 10/100 media interface on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto not sure why listed twice...or if this even relates to the card seeing how it doesnt say 1000base-SX here is what the entire interface section looks like (from DMESG): fxp0: Intel Pro 10/100B/100+ Ethernet port 0x5400-0x543f mem 0xfb00-0xfb0f,0xfb201000-0xfb201fff irq 10 at device 3.0 on pci0 fxp0: Ethernet address 00:d0:b7:b7:66:eb inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Intel Pro 10/100B/100+ Ethernet port 0x5440-0x547f mem 0xfb10-0xfb1f,0xfb202000-0xfb202fff irq 5 at device 6.0 on pci0 fxp1: Ethernet address 00:02:b3:10:e4:13 inphy1: i82555 10/100 media interface on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Here is the output of ifconfig: fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.0.2 netmask 0xf800 broadcast 192.168.7.255 inet6 fe80::2d0:b7ff:feb7:66eb%fxp0 prefixlen 64 scopeid 0x1 ether 00:d0:b7:b7:66:eb media: Ethernet autoselect (100baseTX full-duplex) status: active fxp1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.1.1 netmask 0xff00 broadcast 192.168.1.255 inet6 fe80::202:b3ff:fe10:e413%fxp1 prefixlen 64 scopeid 0x2 ether 00:02:b3:10:e4:13 media: Ethernet autoselect (100baseTX full-duplex) status: active ppp0: flags=8010POINTOPOINT,MULTICAST mtu 1500 sl0: flags=c010POINTOPOINT,LINK2,MULTICAST mtu 552 faith0: flags=8002BROADCAST,MULTICAST mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 inet 127.0.0.1 netmask 0xff00 I am running two 100baseT nics on this box... appreciate any help. Will = Will Williams ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] = Will Williams = Will Williams ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]