Rob Lahaye wrote:
Hi,
I'm using 4.7 Release.
When the kernel boots, I get a relatively long wait (a minute or more)
at the harddisk detection. The HD is a IBM-DTLA/30.7Gb; CPU is Intel
1.7 GHz.
I don't know the answer to your question ... but I can say a few things
about the issue:
1) I have it happening on a few older machines
2) These machines are rock-stable in every other regard
Hope this is useful.
For the whole 'dmesg' output, see below in the PS; the place where the
wait occurs is here:
[...]
atapci0: Intel ICH2 ATA100 controller port 0xb800-0xb80f at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
[ HERE is the long wait! ]
ata1: at 0x170 irq 15 on atapci0
uhci0: Intel 82801BA/BAM (ICH2) USB controller USB-A port
0xb400-0xb41f irq 11 at device 31.2 on pci0
[...]
Any ideas why the kernel boot is not going smooth at that point?
Thanks!
Rob.
PS: the complete boot log is:
avail memory = 518733824 (506576K bytes)
Preloaded elf kernel kernel at 0xc03f1000.
Preloaded mfs_root /mfsroot at 0xc03f1084.
Pentium Pro MTRR support enabled
md0: Preloaded image /mfsroot 4096 bytes at 0xc03ee354
md1: Malloc disk
Using $PIR table, 12 entries at 0xc00f1600
npx0: math processor on motherboard
npx0: INT 16 interface
pcib0: Intel 82845 Host to PCI bridge on motherboard
pci0: PCI bus on pcib0
pcib1: Intel 82845 PCI-PCI (AGP) bridge at device 1.0 on pci0
pci1: PCI bus on pcib1
pcib2: Intel 82801BA/BAM (ICH2) Hub to PCI bridge at device 30.0 on pci0
pci2: PCI bus on pcib2
pci2: S3 ViRGE DX/GX graphics accelerator at 10.0 irq 12
rl0: RealTek 8139 10/100BaseTX port 0xd800-0xd8ff mem
0xef80-0xef8000ff irq 10 at device 12.0 on pci2
rl0: Ethernet address: 00:a0:b0:0e:3a:95
miibus0: MII bus on rl0
rlphy0: RealTek internal media interface on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: Intel 82801BA/BAM (ICH2) PCI to LPC bridge at device 31.0 on pci0
isa0: ISA bus on isab0
atapci0: Intel ICH2 ATA100 controller port 0xb800-0xb80f at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: Intel 82801BA/BAM (ICH2) USB controller USB-A port
0xb400-0xb41f irq 11 at device 31.2 on pci0
usb0: Intel 82801BA/BAM (ICH2) USB controller USB-A on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: Intel 82801BA/BAM (ICH2) USB controller USB-B port
0xb000-0xb01f irq 5 at device 31.4 on pci0
usb1: Intel 82801BA/BAM (ICH2) USB controller USB-B on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
orm0: Option ROM at iomem 0xc-0xc7fff on isa0
fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1440-KB 3.5 drive on fdc0 drive 0
atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0
vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0
sc0: System console at flags 0x100 on isa0
sc0: VGA 16 virtual consoles, flags=0x100
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
--
Bill Moran
Potential Technologies
http://www.potentialtech.com
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
