Re: Multiple RealTect adaptors
--- Peter Rosa <[EMAIL PROTECTED]> wrote: > Hello again, > > of course, everything was there: > dmesg - YES > ifconfig - YES > rc.conf - YES > > But, whenever the machine boots, ifconfig returns: > rl0: flags 8843 mtu 1500 > inet 192.168.1.11 netmask > ether > media > status: active > rl1: flags 8843 mtu 1500 > ether > media > status: no carrier > > Both have the same flags. Second has no > IP/MSK/BCAST. > > ifconfig rl1 192.168.1.12 netmask 255.255.255.0 > always returns > config: ioctl (SIOCIFADDR): File exists > > What could be wrong ? > > It is the same when I xchange both cards/use another > PCI slots. > > Peter > > I believe it has something to do with the netmask and the interface rl1 being on the same subnet. It should work by giving the interface a subnet of 255.255.255.255. __ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Multiple RealTect adaptors - SOLVED
Fantastic idea. It solved the problem. Many thanks and have a nice day. Peter - Original Message - From: "Mykroft Holmes IV" <[EMAIL PROTECTED]> To: "Peter Rosa" <[EMAIL PROTECTED]> Cc: "Olaf Hoyer" <[EMAIL PROTECTED]>; "FreeBSD Questions" <[EMAIL PROTECTED]> Sent: Wednesday, December 03, 2003 6:53 PM Subject: Re: Multiple RealTect adaptors > Peter Rosa wrote: > > >Hello again, > > > >of course, everything was there: > >dmesg - YES > >ifconfig - YES > >rc.conf - YES > > > >But, whenever the machine boots, ifconfig returns: > >rl0: flags 8843 mtu 1500 > > inet 192.168.1.11 netmask > > ether > > media > > status: active > >rl1: flags 8843 mtu 1500 > > ether > > media > > status: no carrier > > > >Both have the same flags. Second has no IP/MSK/BCAST. > > > >ifconfig rl1 192.168.1.12 netmask 255.255.255.0 always returns > >config: ioctl (SIOCIFADDR): File exists > > > >What could be wrong ? > > > >It is the same when I xchange both cards/use another PCI slots. > > > >Peter > > > > > > > > > Try putting the second NIC on a second subnet. IIRC FreeBSD doesn't > support multiple adaptors on the same network. > > Adam > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Multiple RealTect adaptors
Peter Rosa wrote: Hello again, of course, everything was there: dmesg - YES ifconfig - YES rc.conf - YES But, whenever the machine boots, ifconfig returns: rl0: flags 8843 mtu 1500 inet 192.168.1.11 netmask ether media status: active rl1: flags 8843 mtu 1500 ether media status: no carrier Both have the same flags. Second has no IP/MSK/BCAST. ifconfig rl1 192.168.1.12 netmask 255.255.255.0 always returns config: ioctl (SIOCIFADDR): File exists What could be wrong ? It is the same when I xchange both cards/use another PCI slots. Peter Try putting the second NIC on a second subnet. IIRC FreeBSD doesn't support multiple adaptors on the same network. Adam ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Multiple RealTect adaptors
Hello again, of course, everything was there: dmesg - YES ifconfig - YES rc.conf - YES But, whenever the machine boots, ifconfig returns: rl0: flags 8843 mtu 1500 inet 192.168.1.11 netmask ether media status: active rl1: flags 8843 mtu 1500 ether media status: no carrier Both have the same flags. Second has no IP/MSK/BCAST. ifconfig rl1 192.168.1.12 netmask 255.255.255.0 always returns config: ioctl (SIOCIFADDR): File exists What could be wrong ? It is the same when I xchange both cards/use another PCI slots. Peter - Original Message - From: "Olaf Hoyer" <[EMAIL PROTECTED]> To: "Peter Rosa" <[EMAIL PROTECTED]> Cc: "FreeBSD Questions" <[EMAIL PROTECTED]> Sent: Wednesday, December 03, 2003 6:16 PM Subject: Re: Multiple RealTect adaptors > On Wed, 3 Dec 2003, Peter Rosa wrote: > > > Dear list, > > > > I already have found MAKEDEV all in /dev folder. Started, finished, no > > progress. The card is physically OK. > > > > While trying to reconfigure eth card via > > ifconfig rl0 create inet 192.168.1.11 netmask 255.255.255.0 > > > > it returns err: SIOCIFCREATE: Invalid agrument. > > > > What do I do wrong? And how could I make the card work ? > > Hi! > > Well, as the output states, your arguments to ifconfig are incorrect. > > to check if the card is recognized: > > dmesg |grep rl0 > > when it appears, do a: > > ifconfig -a > > to see, if a rl0 interface is there. > > to simply configure it, do: > > ifconfig rl0 192.168.1.11 netmask 255.255.255.0 > > > shall be sufficient. > > To make it permanent during bootup, insert in /etc/rc.conf: > > ifconfig_rl0="inet 192.168.1.11 netmask 255.255.255.0" > > > HTH > Olaf > > -- > Olaf Hoyer[EMAIL PROTECTED] > Fuerchterliche Erlebniss geben zu raten, > ob der, welcher sie erlebt, nicht etwas Fuerchterliches ist. > (Nietzsche, Jenseits von Gut und Boese) > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Multiple RealTect adaptors
On Wed, 3 Dec 2003, Peter Rosa wrote: > Dear list, > > I already have found MAKEDEV all in /dev folder. Started, finished, no > progress. The card is physically OK. > > While trying to reconfigure eth card via > ifconfig rl0 create inet 192.168.1.11 netmask 255.255.255.0 > > it returns err: SIOCIFCREATE: Invalid agrument. > > What do I do wrong? And how could I make the card work ? Hi! Well, as the output states, your arguments to ifconfig are incorrect. to check if the card is recognized: dmesg |grep rl0 when it appears, do a: ifconfig -a to see, if a rl0 interface is there. to simply configure it, do: ifconfig rl0 192.168.1.11 netmask 255.255.255.0 shall be sufficient. To make it permanent during bootup, insert in /etc/rc.conf: ifconfig_rl0="inet 192.168.1.11 netmask 255.255.255.0" HTH Olaf -- Olaf Hoyer[EMAIL PROTECTED] Fuerchterliche Erlebniss geben zu raten, ob der, welcher sie erlebt, nicht etwas Fuerchterliches ist. (Nietzsche, Jenseits von Gut und Boese) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Multiple RealTect adaptors
Dear list, I already have found MAKEDEV all in /dev folder. Started, finished, no progress. The card is physically OK. While trying to reconfigure eth card via ifconfig rl0 create inet 192.168.1.11 netmask 255.255.255.0 it returns err: SIOCIFCREATE: Invalid agrument. What do I do wrong? And how could I make the card work ? Peter ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Multiple RealTect adaptors
Dear list, I have created small server with 2 Eth RealTec adaptors. After boot, one is properly configured, second has no IP address, and I can not finish the setup. The failure apear right after recompiling the world and kernel. I have only ran make world; make kernel. Is there something I forgot to do? E.g. to recreate everything in /dev? And how to do it? Please help me ASAP, I have to finish it this night. Peter Rosa ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"