Re: Problem regarding dhcp and FreeBSD 4.10 on a laptop
I checked the resolv.conf file, but alas, it had the proper information in it. The laptop still can't connect to the internet, I've even tried using a linksys wireless-B USB network adapter and the WAP key to try and connect, but no go. - Original Message - From: "Deceased" <[EMAIL PROTECTED]> To: "Scott Key" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Monday, October 04, 2004 7:02 PM Subject: Re: Problem regarding dhcp and FreeBSD 4.10 on a laptop Scott Key wrote: I have a Toshiba Satellite that used to run Win 98 until I got fed up and installed FreeBSD. This is my first FreeBSD installation, though I received help from a few people more knowledgable than I. The problem I am having is this: I have comcast broadband internet on a Linksys Wireless-G Gateway Modem/Router. I have two other computers that run windows, both of which have no problem using dhcp to obtain their IP addresses. For reasons that I have been unable to figure out after days of searching the internet, DHCP will assign a proper IP when pccard_ifconfig is set to use it in the rc.conf. The problem is that I am unable to get past the network. I can ping within the network to my hearts content, and if pinging my router and other computers was entertaining for more than five seconds, I'd be dandy. I have tried setting static IP's, I've tried manually adding the route's needed into the routing table, but NOTHING thus far has allowed be get outside the network. I contacte d my cable company, who dutifully reported to me that they have no idea what FreeBSD is, anything other than Windows or Mac, and they are useless. In any event, I hope that some help can be provided in this matter. Everything else with FreeBSD works wonderfully, but for some reason, it simply will not allow me access the internet. Just to clarify, the PCcard is being recognized by FreeBSD, I added it in, it works fine. I have configured rc.conf to include a pccard_ifconfig (currently it's set to DHCP, which seems to be setting the appropriate ip address). Any help that could be offered would be most appreciated. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" I dont know but it may by that you have blank resolv.conf . Put there your providers DNS server ip address. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem regarding dhcp and FreeBSD 4.10 on a laptop
in message <[EMAIL PROTECTED]>, wrote Scott Key thusly... > ( reformatted) > I have a Toshiba Satellite that used to run Win 98 until I got fed > up and installed FreeBSD. This is my first FreeBSD installation, > though I received help from a few people more knowledgable than I. > > The problem I am having is this: ... Not related to your problem, but your problem would have been much easier to read if your OP had been divided into 4-6 paragraphs (which is what i did to my local copy). That way your post would not have seemed too daunting to read. - Parv -- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem regarding dhcp and FreeBSD 4.10 on a laptop
When I've had a problem like this it's usually my firewall. Are you running a firewall at all? Also, can you ssh in to the BSD box from inside the network? Andrew Scott Key wrote: > I have a Toshiba Satellite that used to run Win 98 until I got fed up and +installed FreeBSD. This is my first FreeBSD installation, though I received +help from a few people more knowledgable than I. The problem I am having is +this: I have comcast broadband internet on a Linksys Wireless-G Gateway +Modem/Router. I have two other computers that run windows, both of which have +no problem using dhcp to obtain their IP addresses. For reasons that I have +been unable to figure out after days of searching the internet, DHCP will +assign a proper IP when pccard_ifconfig is set to use it in the rc.conf. The +problem is that I am unable to get past the network. I can ping within the +network to my hearts content, and if pinging my router and other computers was +entertaining for more than five seconds, I'd be dandy. I have tried setting +static IP's, I've tried manually adding the route's needed into the routing +table, but NOTHING thus far has allowed be get outside the network. I contacte d my cable company, who dutifully reported to me that they have no idea what +FreeBSD is, anything other than Windows or Mac, and they are useless. In any +event, I hope that some help can be provided in this matter. Everything else +with FreeBSD works wonderfully, but for some reason, it simply will not allow +me access the internet. Just to clarify, the PCcard is being recognized by +FreeBSD, I added it in, it works fine. I have configured rc.conf to include a +pccard_ifconfig (currently it's set to DHCP, which seems to be setting the +appropriate ip address). Any help that could be offered would be most +appreciated. -- Andrew Robinson Ph: 208 885 7115 Department of Forest Resources Fa: 208 885 6226 University of Idaho E : [EMAIL PROTECTED] PO Box 441133W : http://www.uidaho.edu/~andrewr Moscow ID 83843 Or: http://www.biometrics.uidaho.edu No statement above necessarily represents my employer's opinion. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem regarding dhcp and FreeBSD 4.10 on a laptop
Scott Key wrote: I have a Toshiba Satellite that used to run Win 98 until I got fed up and installed FreeBSD. This is my first FreeBSD installation, though I received help from a few people more knowledgable than I. The problem I am having is this: I have comcast broadband internet on a Linksys Wireless-G Gateway Modem/Router. I have two other computers that run windows, both of which have no problem using dhcp to obtain their IP addresses. For reasons that I have been unable to figure out after days of searching the internet, DHCP will assign a proper IP when pccard_ifconfig is set to use it in the rc.conf. The problem is that I am unable to get past the network. I can ping within the network to my hearts content, and if pinging my router and other computers was entertaining for more than five seconds, I'd be dandy. I have tried setting static IP's, I've tried manually adding the route's needed into the routing table, but NOTHING thus far has allowed be get outside the network. I contacte d my cable company, who dutifully reported to me that they have no idea what FreeBSD is, anything other than Windows or Mac, and they are useless. In any event, I hope that some help can be provided in this matter. Everything else with FreeBSD works wonderfully, but for some reason, it simply will not allow me access the internet. Just to clarify, the PCcard is being recognized by FreeBSD, I added it in, it works fine. I have configured rc.conf to include a pccard_ifconfig (currently it's set to DHCP, which seems to be setting the appropriate ip address). Any help that could be offered would be most appreciated. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" I dont know but it may by that you have blank resolv.conf . Put there your providers DNS server ip address. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Problem regarding dhcp and FreeBSD 4.10 on a laptop
I have a Toshiba Satellite that used to run Win 98 until I got fed up and installed FreeBSD. This is my first FreeBSD installation, though I received help from a few people more knowledgable than I. The problem I am having is this: I have comcast broadband internet on a Linksys Wireless-G Gateway Modem/Router. I have two other computers that run windows, both of which have no problem using dhcp to obtain their IP addresses. For reasons that I have been unable to figure out after days of searching the internet, DHCP will assign a proper IP when pccard_ifconfig is set to use it in the rc.conf. The problem is that I am unable to get past the network. I can ping within the network to my hearts content, and if pinging my router and other computers was entertaining for more than five seconds, I'd be dandy. I have tried setting static IP's, I've tried manually adding the route's needed into the routing table, but NOTHING thus far has allowed be get outside the network. I contacted my cable company, who dutifully reported to me that they have no idea what FreeBSD is, anything other than Windows or Mac, and they are useless. In any event, I hope that some help can be provided in this matter. Everything else with FreeBSD works wonderfully, but for some reason, it simply will not allow me access the internet. Just to clarify, the PCcard is being recognized by FreeBSD, I added it in, it works fine. I have configured rc.conf to include a pccard_ifconfig (currently it's set to DHCP, which seems to be setting the appropriate ip address). Any help that could be offered would be most appreciated. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"