Hi,
I'm trying to put external disks(storage) in my FreeBSD server, but, i only
can't see the disks that was allocated.
I think that is necessary sometype of confugurations, because the hba was
installed and all procedures necessary too.
For information.
Connection type --> SAN with switch MACdata and EMC storage.
Note: I can see the storage array in dmesg.(see example above).
I would like so much if somewhere can help.
thank's for all.
**
# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Thu May 31 10:58:03 UTC 2007
root@:/usr/obj/usr/src/sys/LAB
MPTable: < Kings Canyon>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2400.10-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff
Features2=0x4400>
Logical CPUs per core: 2
real memory = 2146959360 (2047 MB)
avail memory = 2095882240 (1998 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 24
ioapic2: Assuming intbase of 48
ioapic0 irqs 0-23 on motherboard
ioapic1 irqs 24-47 on motherboard
ioapic2 irqs 48-71 on motherboard
kbd1 at kbdmux0
cpu0 on motherboard
cpu1 on motherboard
cpu2 on motherboard
cpu3 on motherboard
pcib0: pcibus 0 on motherboard
pci0: on pcib0
pci0: at device 0.1 (no driver attached)
pcib1: at device 2.0 on pci0
pci1: on pcib1
pci1: at device 28.0 (no driver
attached)
pcib2: at device 29.0 on pci1
pci2: on pcib2
mpt0: port 0x3000-0x30ff mem
0xfc22-0xfc23,0xfc20-0xfc21 irq 48 at device 1.0 on pci2
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.14.0
em0: port
0x3400-0x343f mem 0xfc24-0xfc25 irq 54 at device 3.0 on pci2
em0: Ethernet address: 00:30:48:25:6b:ca
pci1: at device 30.0 (no driver
attached)
pcib3: at device 31.0 on pci1
pci3: on pcib3
ahd0: port
0x4400-0x44ff,0x4000-0x40ff mem 0xfc30-0xfc301fff irq 32 at device 2.0 on
pci3
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: port
0x4c00-0x4cff,0x4800-0x48ff mem 0xfc302000-0xfc303fff irq 33 at device 2.1 on
pci3
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
isp0: port 0x5000-0x50ff mem
0xfc304000-0xfc304fff irq 28 at device 3.0 on pci3
isp0: set PCI line size to 16
isp0: [GIANT-LOCKED]
isp0: Board Type 2312, Chip Revision 0x2, resident F/W Revision 3.3.19
isp0: 839 max I/O commands supported
isp0: NVRAM Port WWN 0x21e08b9a13ea
pci0: at device 29.0 (no driver attached)
pci0: at device 29.1 (no driver attached)
pci0: at device 29.2 (no driver attached)
pcib4: at device 30.0 on pci0
pci4: on pcib4
atapci0: port
0x6c50-0x6c57,0x6c44-0x6c47,0x6c48-0x6c4f,0x6c40-0x6c43,0x6000-0x60ff irq 16 at
device 1.0 on pci4
ata2: on atapci0
ata3: on atapci0
atapci1: port
0x6c68-0x6c6f,0x6c5c-0x6c5f,0x6c60-0x6c67,0x6c58-0x6c5b,0x6400-0x64ff irq 16 at
device 1.1 on pci4
ata4: on atapci1
ata5: on atapci1
pci4: at device 4.0 (no driver attached)
fxp0: port 0x6c00-0x6c3f mem
0xfc401000-0xfc401fff,0xfc42-0xfc43 irq 22 at device 5.0 on pci4
miibus0: on fxp0
inphy0: on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:30:48:25:6b:cb
isab0: at device 31.0 on pci0
isa0: on isab0
atapci2: port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2060-0x206f at device 31.1 on pci0
ata0: on atapci2
ata1: on atapci2
pci0: at device 31.3 (no driver attached)
pmtimer0 on isa0
orm0: at iomem
0xc-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc97ff,0xc9800-0xcd7ff,0xe-0xe3fff
on isa0
atkbdc0: at port 0x60,0x64 on isa0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0
unknown: can't assign resources (memory)
unknown: can't assign resources (port)
unknown: can't assign resources (memory)
unknown: can't assign resources (port)
unknown: can't assign resources (port)
Timecounters tick every 1.000 msec
isp0: Loop Reset Received
isp0: Loop Reset Received
isp0: LIP Received
isp0: Point-to-Point mode
isp0: Loop UP
isp0: Port
