Thanks Yussef, that's done the job.
Chris.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of yussef
Sent: 06 June 2003 07:40
To: [EMAIL PROTECTED]
Subject: Re: Kernel Panic during install with 4.8 mini ISO
before the kernel is loaded, when you're given 10 seconds, hit any key
besides enter, then type 'set hw.pcic.intr_path=1' without the quotes.
good luck. hope this works.
yussef
On Thu, 5 Jun 2003 22:11:18 +0100
Chris Ward [EMAIL PROTECTED] wrote:
I'm seeing a kernel panic during boot of 4.8 mini ISO install CD,
details below.
Fault virtual addr = 0xeb902
Fault code = supervisor read, page not present
Instr Ptr = 0x8:0xc00eb807
Stack Ptr = 0x10:0xc0843d6c
Frame Ptr = 0x10:0xc0843d6c
Code Seg = base 0x0, limit 0xf, type 0x1b, DPL0, pres 1, def32 1,
gran 1 Proc eflags = interrupt enabled, resume, IOPL=0
Current proc = 0 (swapper)
IRQ mask = net tty bio cam
Trap no = 12
Just prior to this it was probing the VGA:
pcio0: unknown card (vendor = 0x1039, dev = 0x7013) at 1.6 irq 10
pcib2: PCI to PCI bridge (vendor = 1039, device = 0001) at device
2.0 on pci0
pci1: PCI bus on pcib2
pci1: SIS model 6300 VGA-compatible display device at 0.0
pci_cfgintr_virgin: using routable interrupt 3
Kernel panic follows...
The kernel is unmodified from that of the ISO image.
I'm guessing that I need to pass in some params to init the graphics
card but being new to FreeBSD I'm not sure how to do this.
Could somebody please point me in the right direction?
Thx.
Chris.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
