RE: Problem installing FreeBSD 6.0
I had this problem when I was using an older model motherboard with only 64k memory. I moved HD to an newer pc to install FreeBSD to HD them returned HD to first box and all was ok. Then configured FreeBSD OS on older box with out any problems after that. Read 6.0 notes about dropped support for i386 cpu which I think is the cause of problem -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Nagy László Zsolt Sent: Wednesday, April 26, 2006 8:53 AM To: Jeff Rollin; freebsd-questions@freebsd.org Subject: Re: Problem installing FreeBSD 6.0 Jeff Rollin wrote: > could you post the partition layout? (i know you said you used > automatic partitioning but the size of the filesystems varies > depending on the size of the slice.) Slices screen: Disk name: ad0 Geometry: 14596 cyls/255 heads/63 sectors = 234484740 sectors (114494 MB) Offset| Size(ST) | End | Name | PType | Desc | Subtype | Flags 0 | 63 | 62 | - | 12| unused | 0 63| 92164842 | 92164904 | ad0s1 | 4 | NTFS/HPFS/QNX | 7 92164905 | 73384920 | 165549824| ad0s2 | 8 | freebsd | 165 165549825 | 68941118 | 234490942| - | 12| unused | 0 Partitions screen: Part | Mount | Size| NewFs| Part ad0s2a | / | 512MB| UFS2 | Y ad0s2b | swap | 4070MB | SWAP | ad0s2d | /var | 3059MB | UFS2+S| Y ad0s2e | /tmp | 512MB | UFS2+S| Y ad0s2f | /usr |27678MB | UFS2+S| Y I choose option 6 "Kern-Developer - Full binaries and doc, Kernel sources only" Then I get the error while I see this: "Extracting base into / directory" Best, Laci ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem installing FreeBSD 6.0
Jeff Rollin wrote: could you post the partition layout? (i know you said you used automatic partitioning but the size of the filesystems varies depending on the size of the slice.) Slices screen: Disk name: ad0 Geometry: 14596 cyls/255 heads/63 sectors = 234484740 sectors (114494 MB) Offset| Size(ST) | End | Name | PType | Desc | Subtype | Flags 0 | 63 | 62 | - | 12| unused | 0 63| 92164842 | 92164904 | ad0s1 | 4 | NTFS/HPFS/QNX | 7 92164905 | 73384920 | 165549824| ad0s2 | 8 | freebsd| 165 165549825 | 68941118 | 234490942| - | 12| unused | 0 Partitions screen: Part | Mount | Size| NewFs| Part ad0s2a | / | 512MB| UFS2 | Y ad0s2b | swap | 4070MB | SWAP | ad0s2d | /var | 3059MB | UFS2+S| Y ad0s2e | /tmp | 512MB | UFS2+S| Y ad0s2f | /usr |27678MB | UFS2+S| Y I choose option 6 "Kern-Developer - Full binaries and doc, Kernel sources only" Then I get the error while I see this: "Extracting base into / directory" Best, Laci ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem installing FreeBSD 6.0
Did you do a custom newfs? No. What's you partition layout? First slice is a Windows NTFS, 45GB Then I have a 35GB slice for FreeBSD (type 165). Inside that slice, I used automatic partitioning. What did you install (only the bare base? or also additional distributions/packages) I selected the 'All binaries and doc but no games, kernel sources only' option. But the problem occurs while it displays: "extracting base into /" so probably it has nothing to do with the selected distros/packages. Laci ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem installing FreeBSD 6.0
On Wed, 26 Apr 2006 10:34:44 -, User Gandalf <[EMAIL PROTECTED]> wrote: Hello, I'm trying to install FreeBSD 6.0 on a regular x86 PC. I'm using the official install disk. It tells me that there are no CD/DVD drives are detected. I have a Pioneer DVD writer (DVR-110D). That has ATAPI interface and I booted the installer from it... I also tried to install the system using a passive ftp connection. It start downloading the base distribution, and I get messages like: pid 125 (cpio), uid 0 inumber 514 on /: out of inodes Unfortunately, I cannot run any commands on the emergency terminal because there are no commands to execute at all. Can you help me please? Did you do a custom newfs? What's you partition layout? What did you install (only the bare base? or also additional distributions/packages) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Problem Installing FreeBSD 6.0, asking for help
> I believe you are saying that 5.2 is currently installed on > the hard drive and you want to do a fresh install from scratch of > 6.0. > > You have to change the pc bios setup to boot from the cd drive > instead of from the hard drive. > The pc will then boot from the 6.0 cd and install 6.0 destroying the > 5.2 system on the hard drive along with any user data you had. After > 6.0 is installed you have to change the bios back to booting from > the hard drive. > > Be sure you have a backup of any user data on the 5.2 system you > want saved. > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > [EMAIL PROTECTED] > Sent: Saturday, March 11, 2006 5:44 PM > To: [EMAIL PROTECTED] > Subject: Problem Installing FreeBSD 6.0, asking for help > > > Hello, > > may I ask you for help with the following Problem: > When I try to install FreeBsd6.0, there is the following error > during the > boot process (because the system is not able to boot from CD, I have > to boot > from floppy) occurs: > ahc0: probe1:ahc0:0:1:0: SCB 6: immediate reset Flags 0x620 > ahc0: probe1:ahc0:0:1:0: No longer in timeout, status=25b > ahc0: Issued channel A bus reset, SCBs 6 aborted. > ... > ... > ... > > There are variants of the messages with different SCB, flags and > status. > > As a result, the install program does not find any disk. > FreeBSD5.2 is running and dmesg produces the following output: > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel Pentium III (797.97-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x686 Stepping = 6 > > Features=0x383f9ff CA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 268369920 (255 MB) > avail memory = 251047936 (239 MB) > Pentium Pro MTRR support enabled > npx0: [FAST] > npx0: on motherboard > npx0: INT 16 interface > acpi0: on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 6 entries at 0xc00fdee0 > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on > acpi0 > acpi_cpu0: on acpi0 > acpi_button0: on acpi0 > acpi_button1: on acpi0 > pcib0: port > 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 > pci0: on pcib0 > pcib0: slot 9 INTA is routed to irq 10 > pcib0: slot 10 INTA is routed to irq 12 > pcib0: slot 11 INTA is routed to irq 5 > agp0: mem > 0xd800-0xdbff at device 0.0 on pci0 > pcib1: at device 1.0 on pci0 > pci1: on pcib1 > pcib0: slot 1 INTA is routed to irq 11 > pcib1: slot 0 INTA is routed to irq 11 > pci1: at device 0.0 (no driver attached) > isab0: at device 7.0 on pci0 > isa0: on isab0 > atapci0: port 0xd000-0xd00f at > device 7.1 > on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > pci0: at device 7.3 (no driver attached) > rl0: port 0xd800-0xd8ff mem > 0xe3001000-0xe30010ff irq 10 at device 9.0 on pci0 > rl0: Ethernet address: 00:40:33:ab:df:66 > miibus0: on rl0 > rlphy0: on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci0: at device 10.0 (no driver attached) > ahc0: port 0xe000-0xe0ff mem > 0xe300-0xe3000fff irq 5 at device 11.0 on pci0 > aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs > fdc0: port > 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > ppc0 port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: on ppc0 > plip0: on ppbus0 > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > atkbdc0: port 0x64,0x60 irq 1 on acpi0 > atkbd0: flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > orm0: at iomem 0xc8000-0xca7ff,0xc-0xc7fff on isa0 > pmtimer0 on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: at port 0x3c0-0x3df iomem 0xa-0xb on > isa0 > Timecounter "TSC" frequency 797967629 Hz quality 800 > Timecounters tick every 10.000 msec > Waiting 15 seconds for SCSI devices to settle > acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently > 100.0% > GEOM: create disk cd0 dp=0xc2d77600 > GEOM: create disk cd1 dp=0xc2d77e00 > GEOM: create disk da0 dp=0xc2e24050 > GEOM: create disk da1 dp=0xc2e26850 > GEOM: create disk da2 dp=0xc2e26450 > cd0 at ahc0 bus 0 target 4 lun 0 > cd0: Removable CD-ROM SCSI-2 device > cd0: 10.000MB/s transfers
RE: Problem Installing FreeBSD 6.0, asking for help
I believe you are saying that 5.2 is currently installed on the hard drive and you want to do a fresh install from scratch of 6.0. You have to change the pc bios setup to boot from the cd drive instead of from the hard drive. The pc will then boot from the 6.0 cd and install 6.0 destroying the 5.2 system on the hard drive along with any user data you had. After 6.0 is installed you have to change the bios back to booting from the hard drive. Be sure you have a backup of any user data on the 5.2 system you want saved. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Saturday, March 11, 2006 5:44 PM To: [EMAIL PROTECTED] Subject: Problem Installing FreeBSD 6.0, asking for help Hello, may I ask you for help with the following Problem: When I try to install FreeBsd6.0, there is the following error during the boot process (because the system is not able to boot from CD, I have to boot from floppy) occurs: ahc0: probe1:ahc0:0:1:0: SCB 6: immediate reset Flags 0x620 ahc0: probe1:ahc0:0:1:0: No longer in timeout, status=25b ahc0: Issued channel A bus reset, SCBs 6 aborted. ... ... ... There are variants of the messages with different SCB, flags and status. As a result, the install program does not find any disk. FreeBSD5.2 is running and dmesg produces the following output: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (797.97-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff real memory = 268369920 (255 MB) avail memory = 251047936 (239 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00fdee0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: on pcib0 pcib0: slot 9 INTA is routed to irq 10 pcib0: slot 10 INTA is routed to irq 12 pcib0: slot 11 INTA is routed to irq 5 agp0: mem 0xd800-0xdbff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci1: at device 0.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: at device 7.3 (no driver attached) rl0: port 0xd800-0xd8ff mem 0xe3001000-0xe30010ff irq 10 at device 9.0 on pci0 rl0: Ethernet address: 00:40:33:ab:df:66 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: at device 10.0 (no driver attached) ahc0: port 0xe000-0xe0ff mem 0xe300-0xe3000fff irq 5 at device 11.0 on pci0 aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: at iomem 0xc8000-0xca7ff,0xc-0xc7fff on isa0 pmtimer0 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter "TSC" frequency 797967629 Hz quality 800 Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% GEOM: create disk cd0 dp=0xc2d77600 GEOM: create disk cd1 dp=0xc2d77e00 GEOM: create disk da0 dp=0xc2e24050 GEOM: create disk da1 dp=0xc2e26850 GEOM: create disk da2 dp=0xc2e26450 cd0 at ahc0 bus 0 target 4 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: cd present [329666 x 2048 byte records] cd1 at ahc0 bus 0 target 5 lun 0 cd1: Removable CD-ROM SCSI-2 device cd1: 8.333MB/s transfers (8.333MHz, offset 15) cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed da2 at ahc0 bus 0 target 2 lun 0 da2: