Re: [OBORONA-SPAM] Re: Bluetooth-related question
On 19 Sep 2005 10:44:03 -0400 Lowell Gilbert <[EMAIL PROTECTED]> wrote: > Andrew Pogrebennyk <[EMAIL PROTECTED]> writes: > > > On 18 Sep 2005 09:39:41 -0400 > > Lowell Gilbert <[EMAIL PROTECTED]> wrote: > > > > > Andrew Pogrebennyk <[EMAIL PROTECTED]> writes: > > > > > > > Hi! Recently I've bought USB-Bluetooth-adapter and made the > > > > following changes to setup it in FreeBSD: added > > > > ng_ubt_load="YES" to /boot/loader.conf, > > > > cp'ed /usr/share/examples/netgraph/bluetooth/rc.bluetooth > > > > to /etc/rc.bluetooth, chmod'ed 555 /etc/rc.bluetooth and > > > > changed wrote next lines in /etc/rc.local: > > > > > > > > $ cat /etc/rc.local > > > > #!/bin/sh > > > > if [ -f /etc/rc.bluetooth ]; > > > > then /etc/rc.bluetooth start ubt0 > > > > fi > > > > > > > > Do you have anything else using netgraph? > > > > Nothing at all. > > Since everything works, I'm not too worried about it. However, you > could try removing the startup script from running automatically, and > see whether you still get those messages. And then whether they still > happen if you run the script by hand after the system is up. That > would tell you a lot. Thank you, I'm also not worried about that, but I'd like to make one more note: while I was trying to connect to Internet via GPRS (unsuccessful yet, but that most of all needs separate discussion), I've encountered messages like the following (note that they not always follow each other): ubt_bulk_out_complete2: ubt0 - Bulk-out xfer failed. TIMEOUT (15) ng_l2cap_l2ca_discon_req: ubt0l2cap - unexpected L2CA_Disconnect request message. Channel does not exist, lcid=0 Probably that's related in some way to our discussion, so I decided to inform about 'em. And excuse for my English if it's not perfect, it's not my native language. Regards, Andrew ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: [OBORONA-SPAM] Re: Bluetooth-related question
Andrew Pogrebennyk <[EMAIL PROTECTED]> writes: > On 18 Sep 2005 09:39:41 -0400 > Lowell Gilbert <[EMAIL PROTECTED]> wrote: > > > Andrew Pogrebennyk <[EMAIL PROTECTED]> writes: > > > > > Hi! Recently I've bought USB-Bluetooth-adapter and made the > > > following changes to setup it in FreeBSD: added ng_ubt_load="YES" > > > to /boot/loader.conf, > > > cp'ed /usr/share/examples/netgraph/bluetooth/rc.bluetooth > > > to /etc/rc.bluetooth, chmod'ed 555 /etc/rc.bluetooth and > > > changed wrote next lines in /etc/rc.local: > > > > > > $ cat /etc/rc.local > > > #!/bin/sh > > > if [ -f /etc/rc.bluetooth ]; > > > then /etc/rc.bluetooth start ubt0 > > > fi > > > > > Do you have anything else using netgraph? > > Nothing at all. Since everything works, I'm not too worried about it. However, you could try removing the startup script from running automatically, and see whether you still get those messages. And then whether they still happen if you run the script by hand after the system is up. That would tell you a lot. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: [OBORONA-SPAM] Re: Bluetooth-related question
On 18 Sep 2005 09:39:41 -0400 Lowell Gilbert <[EMAIL PROTECTED]> wrote: > Andrew Pogrebennyk <[EMAIL PROTECTED]> writes: > > > Hi! Recently I've bought USB-Bluetooth-adapter and made the > > following changes to setup it in FreeBSD: added ng_ubt_load="YES" > > to /boot/loader.conf, > > cp'ed /usr/share/examples/netgraph/bluetooth/rc.bluetooth > > to /etc/rc.bluetooth, chmod'ed 555 /etc/rc.bluetooth and > > changed wrote next lines in /etc/rc.local: > > > > $ cat /etc/rc.local > > #!/bin/sh > > if [ -f /etc/rc.bluetooth ]; > > then /etc/rc.bluetooth start ubt0 > > fi > > > > Daemons like hcsecd and sdpd will be added to /etc/rc.local when > > needed. Everything works fine but the question is why I'm recieving > > following warning (they're white-colored) during startup: > > WARNING: attempt to net_add_domain(bluetooth) after > > domainfinalize() WARNING: attempt to net_add_domain(netgraph) after > > domainfinalize() > > > > Besides, appears also > > twice. Did I managed everything right, perphaps I should move > > startup of bluetooth stack from rc.local to a more early script? > > Here's that part of dmesg output: > > > > $ dmesg > > Copyright (c) 1992-2005 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > > 1994 The Regents of the University of California. All rights > > reserved. FreeBSD 6.0-BETA4 #0: Wed Sep 14 12:27:36 EEST 2005 > > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/NEUTRINO > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: AMD Athlon(TM) XP 1700+ (1459.51-MHz 686-class CPU) > > Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 > > /* stripped */ > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > sio1: port may not be enabled > > vga0: at port 0x3c0-0x3df iomem 0xa-0xb on > > isa0 ubt0: D-Link DBT-122, rev 1.10/0.01, addr 2 > > ubt0: D-Link DBT-122, rev 1.10/0.01, addr 2 > > ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, > > bulk-out=0x2 ubt0: Interface 1 (alt.config 4) endpoints: > > isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=5, buffer > > size=320 ums0: Microsoft Microsoft 5-Button Mouse with > > IntelliEye(TM), rev 1.10/3.00, addr 3, iclass 3/1 ums0: 5 buttons > > and Z dir. Timecounter "TSC" frequency 1459506295 Hz quality 800 > > Timecounters tick every 1.000 msec ad0: 76319MB > 3.06> at ata0-master UDMA100 acd0: CDROM > PX-54TA/1.00> at ata1-master UDMA33 acd1: DMA limited to UDMA33, > > device found non-ATA66 cable acd1: CDRW > 1.10> at ata1-slave UDMA33 Trying to mount root from ufs:/dev/ad0s1a > > pflog0: promiscuous mode enabled > > WARNING: attempt to net_add_domain(bluetooth) after domainfinalize() > > WARNING: attempt to net_add_domain(netgraph) after domainfinalize() > > Regards, > > Andrew > > Do you have anything else using netgraph? Nothing at all. > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Bluetooth-related question
Andrew Pogrebennyk <[EMAIL PROTECTED]> writes: > Hi! Recently I've bought USB-Bluetooth-adapter and made the following > changes to setup it in FreeBSD: added ng_ubt_load="YES" > to /boot/loader.conf, > cp'ed /usr/share/examples/netgraph/bluetooth/rc.bluetooth > to /etc/rc.bluetooth, chmod'ed 555 /etc/rc.bluetooth and > changed wrote next lines in /etc/rc.local: > > $ cat /etc/rc.local > #!/bin/sh > if [ -f /etc/rc.bluetooth ]; > then /etc/rc.bluetooth start ubt0 > fi > > Daemons like hcsecd and sdpd will be added to /etc/rc.local when needed. > Everything works fine but the question is why I'm recieving following > warning (they're white-colored) during startup: > WARNING: attempt to net_add_domain(bluetooth) after domainfinalize() > WARNING: attempt to net_add_domain(netgraph) after domainfinalize() > > Besides, appears also > twice. Did I managed everything right, perphaps I should move startup > of bluetooth stack from rc.local to a more early script? Here's that > part of dmesg output: > > $ dmesg > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. FreeBSD 6.0-BETA4 #0: Wed Sep 14 12:27:36 EEST 2005 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/NEUTRINO > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(TM) XP 1700+ (1459.51-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 > /* stripped */ > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: at port 0x3c0-0x3df iomem 0xa-0xb on > isa0 ubt0: D-Link DBT-122, rev 1.10/0.01, addr 2 > ubt0: D-Link DBT-122, rev 1.10/0.01, addr 2 > ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 > ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; > wMaxPacketSize=64; nframes=5, buffer size=320 ums0: Microsoft Microsoft > 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 3, iclass 3/1 > ums0: 5 buttons and Z dir. Timecounter "TSC" frequency 1459506295 Hz > quality 800 Timecounters tick every 1.000 msec > ad0: 76319MB at ata0-master UDMA100 > acd0: CDROM at ata1-master UDMA33 > acd1: DMA limited to UDMA33, device found non-ATA66 cable > acd1: CDRW at ata1-slave UDMA33 > Trying to mount root from ufs:/dev/ad0s1a > pflog0: promiscuous mode enabled > WARNING: attempt to net_add_domain(bluetooth) after domainfinalize() > WARNING: attempt to net_add_domain(netgraph) after domainfinalize() > Regards, Andrew Do you have anything else using netgraph? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
