Re: CD/DVD writer no longer works
>Cdrecord-Clone 2.01 (i386-unknown-freebsd6.0) Copyright (C) 1995-2004 Jörg >Schilling >TOC Type: 1 = CD-ROM >scsidev: '1,1,0' >scsibus: 1 target: 1 lun: 0 >Using libscg version 'schily-0.8'. >SCSI buffer size: 64512 >atapi: 0 >Device type: Removable CD-ROM >Version: 0 >Response Format: 2 >Capabilities : >Vendor_info: 'TSSTcorp' >Identifikation : 'CD-RW TS-H292B' >Revision : 'DE03' >Device seems to be: Generic mmc CD-RW. >Current: 0x >Profile: 0x000A >Profile: 0x0009 >Profile: 0x0008 1) you are using an extremely outdated cdrecord version. A recent version is here: ftp://ftp.berlios.de/pub/cdrecord/alpha/ Use 2.01.01a36 2) your drive seems to have problems with the medium or is defective as it reports medium not present and no current profile is selected. Jörg -- EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin [EMAIL PROTECTED](uni) [EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: CD/DVD writer no longer works
> -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Paul Schmehl > Sent: Thursday, December 06, 2007 1:34 PM > To: FreeBSD Questions > Subject: Re: CD/DVD writer no longer works > > > --On Thursday, December 06, 2007 19:14:51 +0100 Wojciech Puchar > <[EMAIL PROTECTED]> wrote: > > >> /home/pauls/Downloads/FreeBSD/6.2-RELEASE-amd64-disc1.iso fixate > >> burncd: ioctl(CDRIOCWRITESPEED): Input/output error > >> [EMAIL PROTECTED] mount /dev/acd > >> acd0 acd1 > >> [EMAIL PROTECTED] mount /dev/acd1 /mnt/cdrom/ > >> mount: /dev/acd1: Input/output error > > > > mount_cd9660 - unless you use FFS on CD/DVD. > > Yeah, I knew that. Just mistyped it. The results are the same in either > case - input/output error. > > >> CDB: 00 00 00 00 00 00 > >> status: 0x2 (CHECK CONDITION) > >> Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 > 00 00 00 00 > >> 00 00 00 00 00 00 00 00 00 00 00 00 > >> Sense Key: 0x2 Not Ready, Segment 0 > >> Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 > >> Sense flags: Blk 0 (not valid) > >> cmd finished after 0.000s timeout 40s > >> cdrecord: No disk / Wrong disk! > >> > > > > looks like your device is broken - reports no disk > > Does this provide any additional information? > [EMAIL PROTECTED] atacontrol cap acd1 > > Protocol ATA/ATAPI revision 5 > device model TSSTcorpCD-RW TS-H292B > serial number > firmware revision DE03 > cylinders 0 > heads 0 > sectors/track 0 > lba supported > lba48 not supported > dma supported > overlap not supported > > Feature Support EnableValue Vendor > write cacheno no > read ahead no no > Tagged Command Queuing (TCQ) no no 0/0x00 > SMART no no > microcode download no no > security no no > power management yes yes > advanced power management no no 0/0x00 > automatic acoustic management no no 0/0x00 0/0x00 > > The result of this command doesn't change if there's a known good > CD in the > drive. And are you saying that the *device* appears to be bad? Or the > *driver* appears to be bad? Is there a way to confirm this > (utility? test > process?) > Blow CD drive out real well with a can of compressed air. You might have dust obscuring the optical pickup that tells the drive that there's a disk in it. If that doesen't work, then scrap the drive. New ones are very cheap. Or better yet get yourself a nice DVD burner. You can confirm the drive is bad by testing it under Windows. This is assuming of course that you don't trust FreeBSD. Presumably you have access to another system you can swap the drive out with. Ted No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.17.0/1180 - Release Date: 12/10/2007 2:51 PM ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CD/DVD writer no longer works
--On Thursday, December 06, 2007 19:14:51 +0100 Wojciech Puchar <[EMAIL PROTECTED]> wrote: /home/pauls/Downloads/FreeBSD/6.2-RELEASE-amd64-disc1.iso fixate burncd: ioctl(CDRIOCWRITESPEED): Input/output error [EMAIL PROTECTED] mount /dev/acd acd0 acd1 [EMAIL PROTECTED] mount /dev/acd1 /mnt/cdrom/ mount: /dev/acd1: Input/output error mount_cd9660 - unless you use FFS on CD/DVD. CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s cdrecord: No disk / Wrong disk! looks like your device is broken - reports no disk Looks like this is it. To verify I booted into Windows (which I almost never do), and the drive doesn't work - it can't even read a disk. So it's an apparent hardware failure. -- Paul Schmehl ([EMAIL PROTECTED]) Senior Information Security Analyst The University of Texas at Dallas http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CD/DVD writer no longer works
On 11:34:25 Dec 06, Paul Schmehl wrote: > [..] > I can see the device using atacontrol. > [EMAIL PROTECTED] atacontrol info ata0 > Master: acd0 ATA/ATAPI revision 6 > Slave: acd1 ATA/ATAPI revision 5 [..] > Drive buf size : 1016064 = 992 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 616 MB > Total size: 707 MB (70:07.13) = 315535 sectors > Lout start: 708 MB (70:09/10) = 315535 sectors > cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error > CDB: 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0x2 Not Ready, Segment 0 > Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.000s timeout 40s > cdrecord: No disk / Wrong disk! > > I just upgraded from FreeBSD 6.0 RELEASE to 6.2 RELEASE hoping that might > solve the problem. (I cvsupped the sources and ran make > buildworld/buildkernel, etc.) > > Do I have a hardware failure? Or is something else wrong? Check your jumpers. I had a similar problem that I fixed by using the right jumper on the CD/DVD drive. -Girish ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CD/DVD writer no longer works
On Thu, 06 Dec 2007 15:34:01 -0600 Paul Schmehl <[EMAIL PROTECTED]> wrote: > The result of this command doesn't change if there's a known good CD > in the drive. And are you saying that the *device* appears to be > bad? Or the *driver* appears to be bad? Is there a way to confirm > this (utility? test process?) > FWIW, I had similar problems with a DVD burner a couple of weeks ago. I went ahead and replaced it and the troubles went away. You could try and see if you could boot a live file system with it. Or, boot from another optical drive (if you have one) on the system with something like freesbie/ubuntu and see if it works with the live file system. HTH Robert ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CD/DVD writer no longer works
--On Thursday, December 06, 2007 19:14:51 +0100 Wojciech Puchar <[EMAIL PROTECTED]> wrote: /home/pauls/Downloads/FreeBSD/6.2-RELEASE-amd64-disc1.iso fixate burncd: ioctl(CDRIOCWRITESPEED): Input/output error [EMAIL PROTECTED] mount /dev/acd acd0 acd1 [EMAIL PROTECTED] mount /dev/acd1 /mnt/cdrom/ mount: /dev/acd1: Input/output error mount_cd9660 - unless you use FFS on CD/DVD. Yeah, I knew that. Just mistyped it. The results are the same in either case - input/output error. CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s cdrecord: No disk / Wrong disk! looks like your device is broken - reports no disk Does this provide any additional information? [EMAIL PROTECTED] atacontrol cap acd1 Protocol ATA/ATAPI revision 5 device model TSSTcorpCD-RW TS-H292B serial number firmware revision DE03 cylinders 0 heads 0 sectors/track 0 lba supported lba48 not supported dma supported overlap not supported Feature Support EnableValue Vendor write cacheno no read ahead no no Tagged Command Queuing (TCQ) no no 0/0x00 SMART no no microcode download no no security no no power management yes yes advanced power management no no 0/0x00 automatic acoustic management no no 0/0x00 0/0x00 The result of this command doesn't change if there's a known good CD in the drive. And are you saying that the *device* appears to be bad? Or the *driver* appears to be bad? Is there a way to confirm this (utility? test process?) -- Paul Schmehl ([EMAIL PROTECTED]) Senior Information Security Analyst The University of Texas at Dallas http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CD/DVD writer no longer works
/home/pauls/Downloads/FreeBSD/6.2-RELEASE-amd64-disc1.iso fixate burncd: ioctl(CDRIOCWRITESPEED): Input/output error [EMAIL PROTECTED] mount /dev/acd acd0 acd1 [EMAIL PROTECTED] mount /dev/acd1 /mnt/cdrom/ mount: /dev/acd1: Input/output error mount_cd9660 - unless you use FFS on CD/DVD. CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s cdrecord: No disk / Wrong disk! looks like your device is broken - reports no disk ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
