Re: DHCP and rc Questions For FreeBSD 4.10???
in message <[EMAIL PROTECTED]>, wrote Hakim Z. Singhji thusly... > > I reduced it either to ipfiltering or cable modem ^ ^ ^ ^ ^ ^ ^ ^ If you do indeed have IPFilter enabled i doubt "ipfw show" would be of much help (alone). In that case, send output, to this list, of following command too ... ipfstat -ionh - Parv -- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP and rc Questions For FreeBSD 4.10???
>You must really like the # symbol. Actually what I realized is that these posts end up on google searches and all sorts of places all across the web. Since people maybe referencing these threads to help solve their problems I take little extra time to make sure that my posts are legible reads as well as I can make at the time and organized in a way to use at your terminal if necessary. >Have you tested basic network connectivity? I installed FreeBSD on Tuesday Night and on monday I had Redhat running perfectly fine on the same network connection and cable. I reduced it either to ipfiltering or cable modem (both likely candidates). >Do you get all the proper lights on both your NIC and the cable modem? Yes on dc0 I do, however I not familiar with the other two 3COM XL txp0, txp1. But I'm trying to connect to dc0. -Original Message- From: Bill Moran <[EMAIL PROTECTED]> Sent: Aug 12, 2004 10:21 AM To: "Hakim Z. Singhji" <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? "Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > Hi Bill, > > >What is the output of "ipfw show"? > > I dont know that command? Syntax??? > > # > > [EMAIL PROTECTED] ipfw show > > # You must really like the # symbol. > is that correct? Yes, that's all you have to do. Look at the rules that come back to see what your current ruleset is. > >You may do better to set: > >firewall_enable="YES" > >firewall_type="OPEN" > > Ok I will... > > I wrote to Earthlink and this is what they had to say: > > >Earthlink: I suggest you reset the cable modem and then > >try connecting to the net. > > >Earthlink:In order to fix this your cable modem needs to > >be reset. First shut down your computer and then disconnect > >the power from the cable modem for 1 to 3 minutes. This will > >reset the modem. Next, reconnect the power to the cable modem > >and turn on your computer. If this does not resolve the issue, > >please let us know so we can dig a little deeper. > > What do you think of this??? I'll bet any amount of small pocket change that it's a scripted answer they give out the first time you ask a question. Have you done it? Cable modems can be flakey, and resetting them is occasionally required. Have you tested basic network connectivity? Do you get all the proper lights on both your NIC and the cable modem? If there are cable problems, you're going to waste a lot of time trying to fix DHCP problems! -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP and rc Questions For FreeBSD 4.10???
"Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > Hi Bill, > > >What is the output of "ipfw show"? > > I dont know that command? Syntax??? > > # > > [EMAIL PROTECTED] ipfw show > > # You must really like the # symbol. > is that correct? Yes, that's all you have to do. Look at the rules that come back to see what your current ruleset is. > >You may do better to set: > >firewall_enable="YES" > >firewall_type="OPEN" > > Ok I will... > > I wrote to Earthlink and this is what they had to say: > > >Earthlink: I suggest you reset the cable modem and then > >try connecting to the net. > > >Earthlink:In order to fix this your cable modem needs to > >be reset. First shut down your computer and then disconnect > >the power from the cable modem for 1 to 3 minutes. This will > >reset the modem. Next, reconnect the power to the cable modem > >and turn on your computer. If this does not resolve the issue, > >please let us know so we can dig a little deeper. > > What do you think of this??? I'll bet any amount of small pocket change that it's a scripted answer they give out the first time you ask a question. Have you done it? Cable modems can be flakey, and resetting them is occasionally required. Have you tested basic network connectivity? Do you get all the proper lights on both your NIC and the cable modem? If there are cable problems, you're going to waste a lot of time trying to fix DHCP problems! -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP and rc Questions For FreeBSD 4.10???
Hi Bill, >What is the output of "ipfw show"? I dont know that command? Syntax??? # [EMAIL PROTECTED] ipfw show # is that correct? >You may do better to set: >firewall_enable="YES" >firewall_type="OPEN" Ok I will... I wrote to Earthlink and this is what they had to say: >Earthlink: I suggest you reset the cable modem and then >try connecting to the net. >Earthlink:In order to fix this your cable modem needs to >be reset. First shut down your computer and then disconnect >the power from the cable modem for 1 to 3 minutes. This will >reset the modem. Next, reconnect the power to the cable modem >and turn on your computer. If this does not resolve the issue, >please let us know so we can dig a little deeper. What do you think of this??? -Original Message- From: Bill Moran <[EMAIL PROTECTED]> Sent: Aug 12, 2004 12:29 PM To: "Hakim Z. Singhji" <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? "Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > >Who manages your DHCP server? The config I described has worked in > >every configuration I've ever dealt with (and that's quite a few) so > >there is definately something external causing the problem. > > I have an Earthlink Highspeed Cable account w/ DHCP Server > > >Did you install a packet filter when you set this box up? > > Yes, however I turned firewall to [firewall_enable="NO"] and commented > all firewall entries in the rc.conf file. What is the output of "ipfw show"? You may do better to set: firewall_enable="YES" firewall_type="OPEN" > >If you don't have a DHCP _server_ on your network, then the DHCP _client_ > >will not be able to to its job. > > Earthlink should provide a DHCP server, when I had my standalone redhat > box it was configured and I was also receiving DNS as well through earthlink. > > > What do you suggest I do? > > -Original Message- > From: Bill Moran <[EMAIL PROTECTED]> > Sent: Aug 12, 2004 11:45 AM > To: "Hakim Z. Singhji" <[EMAIL PROTECTED]> > Cc: [EMAIL PROTECTED] > Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? > > "Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > > Bill & FreeBSD-Questions, > > > > This configuration is not as intuitive as I thought it would be. > > In /etc/rc.conf I added the following strings: > > > > > > network_interfaces="lo0 dc0" > > ifconfig_dc0="DHCP" > > > > > > "Then I deleted the entries in dhclient.conf and relied on the > > default. I started the daemon by [dhclient dc0] and it > > seemed to be processing. However, that was all that > > happened. When I [ifconfig dc0] I get this return:" > > > > # > > [EMAIL PROTECTED] ifconfig dc0 > > dc0 flags = 8843 > MULTICAST> MTU 1500 > > inet6 fe:80::2c0:f0ff:fe79:4ab7%dc0 prefixlen 64 scopeid 0x1 > > inet 0.0.0.0 net mask 0xff00 broadcast 255.255.255.255 > > ether 00:01:02:c3:40:1a > > media Ethernet auto select (100base) > > status: active > > ### > > > > "Then I tried to ping a host..." > > You've gone too far ... there's not use trying to ping anything if you > obviously didn't get a DHCP address. > > Who manages your DHCP server? The config I described has worked in > every configuration I've ever dealt with (and that's quite a few) so > there is definately something external causing the problem. > > Did you install a packet filter when you set this box up? Look through > /etc/rc.conf for anything related to "firewall". Turn off all firewall > rules while you're setting things up. Once it works, you can start > turning security stuff like that back on. > > > I was reading Greg Lehey's book "The Complete > > FreeBSD" which happens to have more information on > > DHCP,DNS, BIND than "Absolute BSD" by Michael Lucas and > > Greg says that in order for dhcp to work you must start dhcpd, > > am I reading this correctly. I assumed that dhcpd would provide > > DHCP for the private network (in my case), I did not think that > > my default gateway would rely on dhcpd in order to function. > > DHCP only works if there is a DHCP server. DO NOT run more than 1 > DHPC server on a single network or everything is likely to go to hell. >
Re: DHCP and rc Questions For FreeBSD 4.10???
"Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > >Who manages your DHCP server? The config I described has worked in > >every configuration I've ever dealt with (and that's quite a few) so > >there is definately something external causing the problem. > > I have an Earthlink Highspeed Cable account w/ DHCP Server > > >Did you install a packet filter when you set this box up? > > Yes, however I turned firewall to [firewall_enable="NO"] and commented > all firewall entries in the rc.conf file. What is the output of "ipfw show"? You may do better to set: firewall_enable="YES" firewall_type="OPEN" > >If you don't have a DHCP _server_ on your network, then the DHCP _client_ > >will not be able to to its job. > > Earthlink should provide a DHCP server, when I had my standalone redhat > box it was configured and I was also receiving DNS as well through earthlink. > > > What do you suggest I do? > > -Original Message- > From: Bill Moran <[EMAIL PROTECTED]> > Sent: Aug 12, 2004 11:45 AM > To: "Hakim Z. Singhji" <[EMAIL PROTECTED]> > Cc: [EMAIL PROTECTED] > Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? > > "Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > > Bill & FreeBSD-Questions, > > > > This configuration is not as intuitive as I thought it would be. > > In /etc/rc.conf I added the following strings: > > > > > > network_interfaces="lo0 dc0" > > ifconfig_dc0="DHCP" > > > > > > "Then I deleted the entries in dhclient.conf and relied on the > > default. I started the daemon by [dhclient dc0] and it > > seemed to be processing. However, that was all that > > happened. When I [ifconfig dc0] I get this return:" > > > > # > > [EMAIL PROTECTED] ifconfig dc0 > > dc0 flags = 8843 > MULTICAST> MTU 1500 > > inet6 fe:80::2c0:f0ff:fe79:4ab7%dc0 prefixlen 64 scopeid 0x1 > > inet 0.0.0.0 net mask 0xff00 broadcast 255.255.255.255 > > ether 00:01:02:c3:40:1a > > media Ethernet auto select (100base) > > status: active > > ### > > > > "Then I tried to ping a host..." > > You've gone too far ... there's not use trying to ping anything if you > obviously didn't get a DHCP address. > > Who manages your DHCP server? The config I described has worked in > every configuration I've ever dealt with (and that's quite a few) so > there is definately something external causing the problem. > > Did you install a packet filter when you set this box up? Look through > /etc/rc.conf for anything related to "firewall". Turn off all firewall > rules while you're setting things up. Once it works, you can start > turning security stuff like that back on. > > > I was reading Greg Lehey's book "The Complete > > FreeBSD" which happens to have more information on > > DHCP,DNS, BIND than "Absolute BSD" by Michael Lucas and > > Greg says that in order for dhcp to work you must start dhcpd, > > am I reading this correctly. I assumed that dhcpd would provide > > DHCP for the private network (in my case), I did not think that > > my default gateway would rely on dhcpd in order to function. > > DHCP only works if there is a DHCP server. DO NOT run more than 1 > DHPC server on a single network or everything is likely to go to hell. > > Most cheesy "internet routers" that people buy include a DHCP server. > > If you provide more information about what your network setup is, we > can tell you whether you need a DHCP server or not. But the simple > answer is: DHCP won't work unless there is a DHCP server somewhere. > > > Now I have 2 questions: > > *must I configure dhcpd now? > > Maybe not. Does the network you're plugging in to require DHCP? > > > *must I configure dns (resolv.conf, named, etc.)? > > No. If you don't mind using IP addresses for everything. If you want > to be able to use hostnames (such as www.yahoo.com) then you need DNS. > > > *does DHCP rely on the two configurations list above to data? > > Huh? > > The two lines I provided are enough to configure FreeBSD to be a DHCP > _client_. Any additional configuration is just tweaking its behaviour > and and is almost never required. > > If you don't have a DHCP _server_ on your network, then the DHCP _client_ > will not be able to to its job
Re: DHCP and rc Questions For FreeBSD 4.10???
>Who manages your DHCP server? The config I described has worked in >every configuration I've ever dealt with (and that's quite a few) so >there is definately something external causing the problem. I have an Earthlink Highspeed Cable account w/ DHCP Server >Did you install a packet filter when you set this box up? Yes, however I turned firewall to [firewall_enable="NO"] and commented all firewall entries in the rc.conf file. >If you don't have a DHCP _server_ on your network, then the DHCP _client_ >will not be able to to its job. Earthlink should provide a DHCP server, when I had my standalone redhat box it was configured and I was also receiving DNS as well through earthlink. What do you suggest I do? -Original Message- From: Bill Moran <[EMAIL PROTECTED]> Sent: Aug 12, 2004 11:45 AM To: "Hakim Z. Singhji" <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? "Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > Bill & FreeBSD-Questions, > > This configuration is not as intuitive as I thought it would be. > In /etc/rc.conf I added the following strings: > > > network_interfaces="lo0 dc0" > ifconfig_dc0="DHCP" > > > "Then I deleted the entries in dhclient.conf and relied on the > default. I started the daemon by [dhclient dc0] and it > seemed to be processing. However, that was all that > happened. When I [ifconfig dc0] I get this return:" > > # > [EMAIL PROTECTED] ifconfig dc0 > dc0 flags = 8843 MULTICAST> MTU 1500 > inet6 fe:80::2c0:f0ff:fe79:4ab7%dc0 prefixlen 64 scopeid 0x1 > inet 0.0.0.0 net mask 0xff00 broadcast 255.255.255.255 > ether 00:01:02:c3:40:1a > media Ethernet auto select (100base) > status: active > ### > > "Then I tried to ping a host..." You've gone too far ... there's not use trying to ping anything if you obviously didn't get a DHCP address. Who manages your DHCP server? The config I described has worked in every configuration I've ever dealt with (and that's quite a few) so there is definately something external causing the problem. Did you install a packet filter when you set this box up? Look through /etc/rc.conf for anything related to "firewall". Turn off all firewall rules while you're setting things up. Once it works, you can start turning security stuff like that back on. > I was reading Greg Lehey's book "The Complete > FreeBSD" which happens to have more information on > DHCP,DNS, BIND than "Absolute BSD" by Michael Lucas and > Greg says that in order for dhcp to work you must start dhcpd, > am I reading this correctly. I assumed that dhcpd would provide > DHCP for the private network (in my case), I did not think that > my default gateway would rely on dhcpd in order to function. DHCP only works if there is a DHCP server. DO NOT run more than 1 DHPC server on a single network or everything is likely to go to hell. Most cheesy "internet routers" that people buy include a DHCP server. If you provide more information about what your network setup is, we can tell you whether you need a DHCP server or not. But the simple answer is: DHCP won't work unless there is a DHCP server somewhere. > Now I have 2 questions: > *must I configure dhcpd now? Maybe not. Does the network you're plugging in to require DHCP? > *must I configure dns (resolv.conf, named, etc.)? No. If you don't mind using IP addresses for everything. If you want to be able to use hostnames (such as www.yahoo.com) then you need DNS. > *does DHCP rely on the two configurations list above to data? Huh? The two lines I provided are enough to configure FreeBSD to be a DHCP _client_. Any additional configuration is just tweaking its behaviour and and is almost never required. If you don't have a DHCP _server_ on your network, then the DHCP _client_ will not be able to to its job. If you have a very small network (how many computers are here anyway?) a DHCP server is probably more work than it's worth. If you are plugged into a larger network (such a the Internet through an ISP) then either a) your ISP's DHCP isn't working right or b) your ISP isn't using DHCP or c) your ISP is doing something to enforce security, such as registering MAC addresses, and you aren't registered correctly or d) something bizaar that I've never seen before. Again, if you could provide some information on how you're trying to set things up, we could provide less general answers. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP and rc Questions For FreeBSD 4.10???
"Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > Bill & FreeBSD-Questions, > > This configuration is not as intuitive as I thought it would be. > In /etc/rc.conf I added the following strings: > > > network_interfaces="lo0 dc0" > ifconfig_dc0="DHCP" > > > "Then I deleted the entries in dhclient.conf and relied on the > default. I started the daemon by [dhclient dc0] and it > seemed to be processing. However, that was all that > happened. When I [ifconfig dc0] I get this return:" > > # > [EMAIL PROTECTED] ifconfig dc0 > dc0 flags = 8843 MULTICAST> MTU 1500 > inet6 fe:80::2c0:f0ff:fe79:4ab7%dc0 prefixlen 64 scopeid 0x1 > inet 0.0.0.0 net mask 0xff00 broadcast 255.255.255.255 > ether 00:01:02:c3:40:1a > media Ethernet auto select (100base) > status: active > ### > > "Then I tried to ping a host..." You've gone too far ... there's not use trying to ping anything if you obviously didn't get a DHCP address. Who manages your DHCP server? The config I described has worked in every configuration I've ever dealt with (and that's quite a few) so there is definately something external causing the problem. Did you install a packet filter when you set this box up? Look through /etc/rc.conf for anything related to "firewall". Turn off all firewall rules while you're setting things up. Once it works, you can start turning security stuff like that back on. > I was reading Greg Lehey's book "The Complete > FreeBSD" which happens to have more information on > DHCP,DNS, BIND than "Absolute BSD" by Michael Lucas and > Greg says that in order for dhcp to work you must start dhcpd, > am I reading this correctly. I assumed that dhcpd would provide > DHCP for the private network (in my case), I did not think that > my default gateway would rely on dhcpd in order to function. DHCP only works if there is a DHCP server. DO NOT run more than 1 DHPC server on a single network or everything is likely to go to hell. Most cheesy "internet routers" that people buy include a DHCP server. If you provide more information about what your network setup is, we can tell you whether you need a DHCP server or not. But the simple answer is: DHCP won't work unless there is a DHCP server somewhere. > Now I have 2 questions: > *must I configure dhcpd now? Maybe not. Does the network you're plugging in to require DHCP? > *must I configure dns (resolv.conf, named, etc.)? No. If you don't mind using IP addresses for everything. If you want to be able to use hostnames (such as www.yahoo.com) then you need DNS. > *does DHCP rely on the two configurations list above to data? Huh? The two lines I provided are enough to configure FreeBSD to be a DHCP _client_. Any additional configuration is just tweaking its behaviour and and is almost never required. If you don't have a DHCP _server_ on your network, then the DHCP _client_ will not be able to to its job. If you have a very small network (how many computers are here anyway?) a DHCP server is probably more work than it's worth. If you are plugged into a larger network (such a the Internet through an ISP) then either a) your ISP's DHCP isn't working right or b) your ISP isn't using DHCP or c) your ISP is doing something to enforce security, such as registering MAC addresses, and you aren't registered correctly or d) something bizaar that I've never seen before. Again, if you could provide some information on how you're trying to set things up, we could provide less general answers. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP and rc Questions For FreeBSD 4.10???
Bill & FreeBSD-Questions, This configuration is not as intuitive as I thought it would be. In /etc/rc.conf I added the following strings: network_interfaces="lo0 dc0" ifconfig_dc0="DHCP" "Then I deleted the entries in dhclient.conf and relied on the default. I started the daemon by [dhclient dc0] and it seemed to be processing. However, that was all that happened. When I [ifconfig dc0] I get this return:" # [EMAIL PROTECTED] ifconfig dc0 dc0 flags = 8843 MTU 1500 inet6 fe:80::2c0:f0ff:fe79:4ab7%dc0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 net mask 0xff00 broadcast 255.255.255.255 ether 00:01:02:c3:40:1a media Ethernet auto select (100base) status: active ### "Then I tried to ping a host..." ### [EMAIL PROTECTED] ping www.yahoo.com [EMAIL PROTECTED] ping 24.199.105.1 [EMAIL PROTECTED] ping www.absolutebsd.org Ping: Cannot resolve www.yahoo.com hostname lookup failure, etc. ### "However somehow when I run a report the system indicates that UDP packets are being transmitted but the statistics are highly skewed at a rate of 11290 IKPTS : 38 OPKTS" I was reading Greg Lehey's book "The Complete FreeBSD" which happens to have more information on DHCP,DNS, BIND than "Absolute BSD" by Michael Lucas and Greg says that in order for dhcp to work you must start dhcpd, am I reading this correctly. I assumed that dhcpd would provide DHCP for the private network (in my case), I did not think that my default gateway would rely on dhcpd in order to function. Now I have 2 questions: *must I configure dhcpd now? *must I configure dns (resolv.conf, named, etc.)? *does DHCP rely on the two configurations list above to data? Thank you in advance for your help? HZS -Original Message- From: "Hakim Z. Singhji" <[EMAIL PROTECTED]> Sent: Aug 11, 2004 12:32 PM To: Bill Moran <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Alright, thank you Bill...I will let you know how I fair. Cheers -Original Message- From: Bill Moran <[EMAIL PROTECTED]> Sent: Aug 11, 2004 9:25 AM To: "Hakim Z. Singhji" <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Wrap your likes around 72 characters. All you need in /etc/rc.conf is: network_interfaces="lo0 dc0" ifconfig_dc0="DHCP" Everything else you added is just re-affirming the default values. "Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > Hi All, > > I've been researching this issue although it may be minor I don't like to rely on > the "[EMAIL PROTECTED]" unless I have to. I'm sure you understand...anyway, > http:www.freebsddiary.com has a tutorial that with info I could not find in "The > Complete FreeBSD" or "Absolute BSD". It described two entries; one in dhclient.conf > and the other in rc.conf. See Below: > > ### > dhclient.conf > ### > interface "dc0"{ > send host-name "redgate"; > request subnet-mask, broadcast-address, routers, domain-name-servers, domain-name, > time-servers; > require domain-name-servers; > > ### > rc.conf > ### > ifconfig_dc0="DHCP" #IS THIS VARIABLE DECLARATION CASE SENSITIVE??? > hostname="redgate" > > ### > > The question I have now is if this is all I have to do to get dhcp running at > startup? I anyone else has any suggestions they are welcome. Unfortunately I cannot > test this until the evening so feedback will be very helpful and will save me some > time researching. Thanks in advance. > > -Original Message- > From: "Hakim Z. Singhji" <[EMAIL PROTECTED]> > Sent: Aug 11, 2004 11:24 AM > To: [EMAIL PROTECTED] > Subject: DHCP and rc Questions For FreeBSD 4.10??? > > Hi All, > > I have installed FreeBSD 4.10 to serve as a headless gateway/router/firewall/NAT. > The first problem that I have run into can probably be resolved easily. I tried to > configure my NIC card via sysinstaller. However, rc.conf does not have a startup > variable for "dc0". Therefore dhclient is inoperable. > > I built this box to be headless therefore it is low-tech with no floppy or flash > drive and is currently a stand-alone machine so I am not able to copy the rc.conf > file to this post. "dc0" is working because I can bring its status to active > manually: '[EMAIL PR
Re: DHCP and rc Questions For FreeBSD 4.10???
Alright, thank you Bill...I will let you know how I fair. Cheers -Original Message- From: Bill Moran <[EMAIL PROTECTED]> Sent: Aug 11, 2004 9:25 AM To: "Hakim Z. Singhji" <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Wrap your likes around 72 characters. All you need in /etc/rc.conf is: network_interfaces="lo0 dc0" ifconfig_dc0="DHCP" Everything else you added is just re-affirming the default values. "Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > Hi All, > > I've been researching this issue although it may be minor I don't like to rely on > the "[EMAIL PROTECTED]" unless I have to. I'm sure you understand...anyway, > http:www.freebsddiary.com has a tutorial that with info I could not find in "The > Complete FreeBSD" or "Absolute BSD". It described two entries; one in dhclient.conf > and the other in rc.conf. See Below: > > ### > dhclient.conf > ### > interface "dc0"{ > send host-name "redgate"; > request subnet-mask, broadcast-address, routers, domain-name-servers, domain-name, > time-servers; > require domain-name-servers; > > ### > rc.conf > ### > ifconfig_dc0="DHCP" #IS THIS VARIABLE DECLARATION CASE SENSITIVE??? > hostname="redgate" > > ### > > The question I have now is if this is all I have to do to get dhcp running at > startup? I anyone else has any suggestions they are welcome. Unfortunately I cannot > test this until the evening so feedback will be very helpful and will save me some > time researching. Thanks in advance. > > -Original Message- > From: "Hakim Z. Singhji" <[EMAIL PROTECTED]> > Sent: Aug 11, 2004 11:24 AM > To: [EMAIL PROTECTED] > Subject: DHCP and rc Questions For FreeBSD 4.10??? > > Hi All, > > I have installed FreeBSD 4.10 to serve as a headless gateway/router/firewall/NAT. > The first problem that I have run into can probably be resolved easily. I tried to > configure my NIC card via sysinstaller. However, rc.conf does not have a startup > variable for "dc0". Therefore dhclient is inoperable. > > I built this box to be headless therefore it is low-tech with no floppy or flash > drive and is currently a stand-alone machine so I am not able to copy the rc.conf > file to this post. "dc0" is working because I can bring its status to active > manually: '[EMAIL PROTECTED] ifconfig dc0 ether up'. > > I was wondering what what variables should be assigned to rc.conf, the related > variables I have thus far are: > > ## > ifconfig_dc0="dhcp" > dhcp_program="/sbin/dhclient" > dhcp_flags=" " > ## > > It would be appreciated if someone could attach or copy an rc.conf file for a > similar system configuration. Thanks in advance. > > HZS > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP and rc Questions For FreeBSD 4.10???
Wrap your likes around 72 characters. All you need in /etc/rc.conf is: network_interfaces="lo0 dc0" ifconfig_dc0="DHCP" Everything else you added is just re-affirming the default values. "Hakim Z. Singhji" <[EMAIL PROTECTED]> wrote: > Hi All, > > I've been researching this issue although it may be minor I don't like to rely on > the "[EMAIL PROTECTED]" unless I have to. I'm sure you understand...anyway, > http:www.freebsddiary.com has a tutorial that with info I could not find in "The > Complete FreeBSD" or "Absolute BSD". It described two entries; one in dhclient.conf > and the other in rc.conf. See Below: > > ### > dhclient.conf > ### > interface "dc0"{ > send host-name "redgate"; > request subnet-mask, broadcast-address, routers, domain-name-servers, domain-name, > time-servers; > require domain-name-servers; > > ### > rc.conf > ### > ifconfig_dc0="DHCP" #IS THIS VARIABLE DECLARATION CASE SENSITIVE??? > hostname="redgate" > > ### > > The question I have now is if this is all I have to do to get dhcp running at > startup? I anyone else has any suggestions they are welcome. Unfortunately I cannot > test this until the evening so feedback will be very helpful and will save me some > time researching. Thanks in advance. > > -Original Message- > From: "Hakim Z. Singhji" <[EMAIL PROTECTED]> > Sent: Aug 11, 2004 11:24 AM > To: [EMAIL PROTECTED] > Subject: DHCP and rc Questions For FreeBSD 4.10??? > > Hi All, > > I have installed FreeBSD 4.10 to serve as a headless gateway/router/firewall/NAT. > The first problem that I have run into can probably be resolved easily. I tried to > configure my NIC card via sysinstaller. However, rc.conf does not have a startup > variable for "dc0". Therefore dhclient is inoperable. > > I built this box to be headless therefore it is low-tech with no floppy or flash > drive and is currently a stand-alone machine so I am not able to copy the rc.conf > file to this post. "dc0" is working because I can bring its status to active > manually: '[EMAIL PROTECTED] ifconfig dc0 ether up'. > > I was wondering what what variables should be assigned to rc.conf, the related > variables I have thus far are: > > ## > ifconfig_dc0="dhcp" > dhcp_program="/sbin/dhclient" > dhcp_flags=" " > ## > > It would be appreciated if someone could attach or copy an rc.conf file for a > similar system configuration. Thanks in advance. > > HZS > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP and rc Questions For FreeBSD 4.10???
Hi All, I've been researching this issue although it may be minor I don't like to rely on the "[EMAIL PROTECTED]" unless I have to. I'm sure you understand...anyway, http:www.freebsddiary.com has a tutorial that with info I could not find in "The Complete FreeBSD" or "Absolute BSD". It described two entries; one in dhclient.conf and the other in rc.conf. See Below: ### dhclient.conf ### interface "dc0"{ send host-name "redgate"; request subnet-mask, broadcast-address, routers, domain-name-servers, domain-name, time-servers; require domain-name-servers; ### rc.conf ### ifconfig_dc0="DHCP" #IS THIS VARIABLE DECLARATION CASE SENSITIVE??? hostname="redgate" ### The question I have now is if this is all I have to do to get dhcp running at startup? I anyone else has any suggestions they are welcome. Unfortunately I cannot test this until the evening so feedback will be very helpful and will save me some time researching. Thanks in advance. -Original Message- From: "Hakim Z. Singhji" <[EMAIL PROTECTED]> Sent: Aug 11, 2004 11:24 AM To: [EMAIL PROTECTED] Subject: DHCP and rc Questions For FreeBSD 4.10??? Hi All, I have installed FreeBSD 4.10 to serve as a headless gateway/router/firewall/NAT. The first problem that I have run into can probably be resolved easily. I tried to configure my NIC card via sysinstaller. However, rc.conf does not have a startup variable for "dc0". Therefore dhclient is inoperable. I built this box to be headless therefore it is low-tech with no floppy or flash drive and is currently a stand-alone machine so I am not able to copy the rc.conf file to this post. "dc0" is working because I can bring its status to active manually: '[EMAIL PROTECTED] ifconfig dc0 ether up'. I was wondering what what variables should be assigned to rc.conf, the related variables I have thus far are: ## ifconfig_dc0="dhcp" dhcp_program="/sbin/dhclient" dhcp_flags=" " ## It would be appreciated if someone could attach or copy an rc.conf file for a similar system configuration. Thanks in advance. HZS ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"