RE: FreeBSD on Gigabyte Motherboard GA-7N400 Pro2

2004-06-07 Thread hauan david 


 -Original Message-
 From: Technical Director [mailto:[EMAIL PROTECTED]
 Sent: Thursday, June 03, 2004 8:30 PM
 To: Red
 Cc: [EMAIL PROTECTED]
 Subject: Re: FreeBSD on Gigabyte Motherboard GA-7N400 Pro2
 
 
 
 Red,
 
 Wow, Ma'am or Sir... -- SNICKER
 
 I do believe the nVIDIA nFORCE 2 MCP Integrated controller 
 will operate
 with the /usr/ports/net/nvnet port.
 
 From the port pkg-desc:
 
  bash-2.05b# cat pkg-descr
  This port contains a driver for the NVIDIA nForce MCP 
 Ethernet adapter.
  It contains a wrapper that replaces the Linux nvnet.c, and 
 links against
  the Linux binary only object file (nvnetlib.o) included in 
 the NVIDIA
  driver source distribution.
 
  This should work on all nForce and nForce2 based 
 motherboards that have
  the onboard MCP MAC enabled.
 
 Hope this helps.
 
 R.
 
 On Thu, 3 Jun 2004, Red wrote:
 
  Dear Ma'am or Sir:
  Is FreeBSD in versions 4 or 5 fully supported on the Gigabyte
  GA-7N400 Pro2 which uses the nVIDIA nFORCE 2 Ultra 400 Memory /
  AGP/ PCI Controller (PAC) and the nVIDIA nFORCE 2 MCP Integrated
  Peripheral Controller (PSIPC)?  The processor is an AMD Athlon XP
  with and nVIDIA GeForce 5200 video card and 1 Giga Byte of Ram.
  Thank you,
  Marvin C. Bell
  NRA Endowment,
  Sam's Club Member,
  Former L/ Cpl 10th Marines.
 

here is my dmesg output on ASUS A7N8X nForce2 running 5.2.1 #02
nv0: NVIDIA nForce MCP2 Networking Adapter
port 0xec00-0xec07 mem 0xe000-0 xefff irq 5 at device 4.0 on pci0
nv0: Ethernet address 00:0e:a6:8c:04:8a miibus0: MII bus on nv0
rlphy0: RTL8201L 10/100 media interface on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

dave

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: FreeBSD on Gigabyte Motherboard GA-7N400 Pro2

2004-06-03 Thread Technical Director 

Red,

Wow, Ma'am or Sir... -- SNICKER

I do believe the nVIDIA nFORCE 2 MCP Integrated controller will operate
with the /usr/ports/net/nvnet port.

From the port pkg-desc:

 bash-2.05b# cat pkg-descr
 This port contains a driver for the NVIDIA nForce MCP Ethernet adapter.
 It contains a wrapper that replaces the Linux nvnet.c, and links against
 the Linux binary only object file (nvnetlib.o) included in the NVIDIA
 driver source distribution.

 This should work on all nForce and nForce2 based motherboards that have
 the onboard MCP MAC enabled.

Hope this helps.

R.

On Thu, 3 Jun 2004, Red wrote:

 Dear Ma'am or Sir:
 Is FreeBSD in versions 4 or 5 fully supported on the Gigabyte
 GA-7N400 Pro2 which uses the nVIDIA nFORCE 2 Ultra 400 Memory /
 AGP/ PCI Controller (PAC) and the nVIDIA nFORCE 2 MCP Integrated
 Peripheral Controller (PSIPC)?  The processor is an AMD Athlon XP
 with and nVIDIA GeForce 5200 video card and 1 Giga Byte of Ram.
 Thank you,
 Marvin C. Bell
 NRA Endowment,
 Sam's Club Member,
 Former L/ Cpl 10th Marines.

 ___
 [EMAIL PROTECTED] mailing list
 http://lists.freebsd.org/mailman/listinfo/freebsd-questions
 To unsubscribe, send any mail to [EMAIL PROTECTED]

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]