SCSI problem on a IBM xSeries x206
Hello, I've a problem with a IBM xSeries x206 server. This server is equipped with an Adaptec AIC7901 Ultra320 SCSI RAID card, and the two SCSI disks are configured as RAID1 in the bios card. I've installed FreeBSD 5.3, but the system go on to see the two SCSI disks (sd0 and sd1); not the logical RAID1 unit. If I launch the command pciconf -lv the output is the following: [EMAIL PROTECTED]:4:0: class=0x010400 card=0x005f9005 chip=0x808f9005 rev=0x10 hdr=0x00 vendor = 'Adaptec Inc' device = 'AIC-7901 Ultra320 HostRAID Controller' class= mass storage subclass = RAID And, from the dmesg: ahd0: Adaptec AIC7901 Ultra320 SCSI adapter port 0x3000-0x30ff,0x3400-0x34ff mem 0xd020-0xd0201fff irq 2 7 at device 4.0 on pci3 Thanks, -- Marco pizzi. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: SCSI problem on a IBM xSeries x206
In the last episode (Mar 03), Marco Pizzi said: I've a problem with a IBM xSeries x206 server. This server is equipped with an Adaptec AIC7901 Ultra320 SCSI RAID card, and the two SCSI disks are configured as RAID1 in the bios card. I've installed FreeBSD 5.3, but the system go on to see the two SCSI disks (sd0 and sd1); not the logical RAID1 unit. If I launch the command pciconf -lv the output is the following: [EMAIL PROTECTED]:4:0: class=0x010400 card=0x005f9005 chip=0x808f9005 rev=0x10 hdr=0x00 vendor = 'Adaptec Inc' device = 'AIC-7901 Ultra320 HostRAID Controller' HostRAID is software-based RAID, similar to the software ATA RAID managed by the ataraid driver and the atacontrol command. An enterprising coder could probably modify geom_mirror to recognize whatever disk metadata that HostRAID stores. -- Dan Nelson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
SCSI problem on a IBM xSeries x206
Hello, I've a problem with a IBM xSeries x206 server. This server is equipped with an Adaptec AIC7901 Ultra320 SCSI RAID card, and the two SCSI disks are configured as RAID1 in the bios card. I've installed FreeBSD 5.3, but the system go on to see the two SCSI disks (sd0 and sd1); not the logical RAID1 unit. If I launch the command pciconf -lv the output is the following: [EMAIL PROTECTED]:4:0: class=0x010400 card=0x005f9005 chip=0x808f9005 rev=0x10 hdr=0x00 vendor = 'Adaptec Inc' device = 'AIC-7901 Ultra320 HostRAID Controller' class= mass storage subclass = RAID And, from the dmesg: ahd0: Adaptec AIC7901 Ultra320 SCSI adapter port 0x3000-0x30ff,0x3400-0x34ff mem 0xd020-0xd0201fff irq 2 7 at device 4.0 on pci3 Thanks, -- Marco pizzi. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
