Hello,
A couple of days ago i`ve got this SIEMENS SANTIS 802.11b 11Mbps WLAN
PCCard.
Since then I`m searching for a way to use it but failed miserably...
couldn`t find anything searching the net and archives and I couldn`t
interpret the 'pccard dumpcis' either so i could use with 'pccard
enabler' (maybe it`s not allways possible?)
My questions would be:
1. Did anyone used or using this type of PCCARD on FreeBSD? If yes, how?
2. Could anyone give me some hints how to 'pccardc enabler' this adapter
using the info from the dumpcis tuples?
I`m using FreeBSD 5.3-RELEASE i386.
--- begin pccardc dumpcis ---
Configuration data for card in slot 0
Tuple #1, code = 0x17 (Attribute memory descriptor), length = 3
000: d9 01 ff
Attribute memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 250nS, Memory block size = 2Kb, 1 units
Tuple #2, code = 0x1d (Other conditions for attribute memory), length = 4
000: 03 d9 01 ff
(MWAIT) (3V card)
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 00 00 00 00
PCMCIA ID = 0x0, OEM ID = 0x0
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 23
000: 05 00 53 41 4e 54 49 53 00 57 4c 41 4e 20 50 43
010: 20 43 61 72 64 00 ff
Version = 5.0, Manuf = [SANTIS], card vers = [WLAN PC Card]
Tuple #6, code = 0x1a (Configuration map), length = 6
000: 01 02 00 08 03 ff
Reg len = 2, config register addr = 0x800, last config = 0x2
Registers: XX------ 1 bytes in subtuples
Tuple #7, code = 0x1b (Configuration entry), length = 16
000: c1 81 9d 71 b5 1e 2e 2e 2d fc 14 45 10 b8 ff 20
Config index = 0x1(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 1 second: 2.5 x 100mA
Max current average over 10 ms: 2.5 x 100mA
Power down supply current: 2.5 x 10mA
Wait scale Speed = 1.2 x 10 us
Card decodes 5 address lines, limited 8/16 Bit I/O
IRQ modes:
IRQs: 3 4 5 7 8 9 10 11 12 13 14 15
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #8, code = 0xff (Terminator), length = 0
2 slots found
--- end pccardc dumpcis ---
Any help or suggestion is welcome and thank you!
Best regards,
Csabi
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
