Re: Sony Ericsson: (da0:umass-sim0:0:0:0): NOT READY asc:3a, 0 (repeated)
Snow Mountains [EMAIL PROTECTED] writes: Lowell Gilbert wrote: I have a Sony Ericsson phone, but it isn't a USB device. Thanks Lowell for your response. Do you attach your Sony Ericsson to computer at all, for example if you use it as camera? Is there any other option, or something that can you recommend? Another cable? I don't have any cables. I use Bluetooth when I copy things on or off the camera -- but I don't do that often. These kinds of messages usually mean that the umass device is not responding as expected to queries. Some other Sony devices (cameras) seem to have extra padding requirements; you could try adding a quirk to the code for the umass device driver. To look more deeply, you would need someone with a decent knowledge of the USB protocols. Can you help me about what text I should add (in umass.c??) I mean, how to add quirk just for this specific phone? Sorry, but this is far away from my knowledge but I would like to try. I know how to recompile kernel and test it. I was just suggesting making a copy of one of the entries and replacing the vendor and device IDs with the ones for your device (which you can get from usbdevs(8)). You could look up the FreeBSD developers who have worked on umass.c and ask one of them for help... Good luck, and sorry I haven't time to help more at the moment. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Sony Ericsson: (da0:umass-sim0:0:0:0): NOT READY asc:3a, 0 (repeated)
Snow Mountains wrote: I posted this question 10 days ago, got no replies. Is it possible nobody here installed CD release of FreeBSD 6.2 and has Sony Ericsson mobile phone or something similar which causes similar problem? :-) Maybe summer time is the cause :-) So let me repeat: Hi Snow. It might be that no one knows the answer to your question. I myself have a phone that connects by USB, but it is a Nokia N90 and has no problems being detected. [It detects fine, but doesn't do anything useful. I'll figure out how, I'm sure.] Looking at your messages, the disconnected and lost device errors could be caused by a bad cable. Could that cause the SCSI errors too? Can you test with another cable? It's a good idea to upgrade from the CD release. I think the CD version is the same as the CVS version tagged RELENG_6 [someone will correct me if I'm wrong, I'm sure]. My systems are all using 6.2-RELEASE-p7, which is the same as RELENG_6_2, I think? I'm not sure about that. [I can't check with my build server since I managed to trash my last Windows installation, leaving me without a VMware Player 2 to run it on.] HtH, Adam J Richardson ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Sony Ericsson: (da0:umass-sim0:0:0:0): NOT READY asc:3a, 0 (repeated)
Snow Mountains [EMAIL PROTECTED] writes: I posted this question 10 days ago, got no replies. Is it possible nobody here installed CD release of FreeBSD 6.2 and has Sony Ericsson mobile phone or something similar which causes similar problem? :-) Maybe summer time is the cause :-) So let me repeat: = Hi list, If I plug in my Secure Digital reader with the card from kamera, it is detected very fine and I can mount using -t msdosfs on /mnt/da0s1. But I have a little problem when trying to attach my Sony Ericcson W810 mobile phone to FreeBSD 6.2. See what I get: umass0: Sony Ericsson Sony Ericsson W810, rev 2.00/0.00, addr 5 umass1: Sony Ericsson Sony Ericsson W810, rev 2.00/0.00, addr 5 da0 at umass-sim0 bus 0 target 0 lun 0 da0: SEMC Int.Memory Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 - 6 da1 at umass-sim1 bus 1 target 0 lun 0 da1: SEMC Mem-Stick Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 - 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error .. this block repeats many many times for da0 and da1 too. umass0: at uhub4 port 1 (addr 5) disconnected (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry umass0: detached umass1: at uhub4 port 1 (addr 5) disconnected (da1:umass-sim1:1:0:0): lost device (da1:umass-sim1:1:0:0): removing device entry When I plug out the Ericsson, umass1: detached Other data: FreeBSD 6.2, straight from instalation cd: FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC dmesg | grep usb usb0: Intel 82801DB (ICH4) USB controller USB-A on uhci0 usb0: USB revision 1.0 usb1: Intel 82801DB (ICH4) USB controller USB-B on uhci1 usb1: USB revision 1.0 usb2: Intel 82801DB (ICH4) USB controller USB-C on uhci2 usb2: USB revision 1.0 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: Intel 82801DB/L/M (ICH4) USB 2.0 controller on ehci0 usb3: USB revision 2.0 I searched google, more than 100 results with mistake messages, but nothing I can really use. What can be the reason? Do I have to send more data? I have a Sony Ericsson phone, but it isn't a USB device. These kinds of messages usually mean that the umass device is not responding as expected to queries. Some other Sony devices (cameras) seem to have extra padding requirements; you could try adding a quirk to the code for the umass device driver. To look more deeply, you would need someone with a decent knowledge of the USB protocols. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Sony Ericsson: (da0:umass-sim0:0:0:0): NOT READY asc:3a, 0 (repeated)
Lowell Gilbert wrote: I have a Sony Ericsson phone, but it isn't a USB device. Thanks Lowell for your response. Do you attach your Sony Ericsson to computer at all, for example if you use it as camera? Is there any other option, or something that can you recommend? Another cable? These kinds of messages usually mean that the umass device is not responding as expected to queries. Some other Sony devices (cameras) seem to have extra padding requirements; you could try adding a quirk to the code for the umass device driver. To look more deeply, you would need someone with a decent knowledge of the USB protocols. Can you help me about what text I should add (in umass.c??) I mean, how to add quirk just for this specific phone? Sorry, but this is far away from my knowledge but I would like to try. I know how to recompile kernel and test it. I searched google for how to do this, but everything is too high level discussion. Thanks Sergi M ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Sony Ericsson: (da0:umass-sim0:0:0:0): NOT READY asc:3a, 0 (repeated)
I posted this question 10 days ago, got no replies. Is it possible nobody here installed CD release of FreeBSD 6.2 and has Sony Ericsson mobile phone or something similar which causes similar problem? :-) Maybe summer time is the cause :-) So let me repeat: = Hi list, If I plug in my Secure Digital reader with the card from kamera, it is detected very fine and I can mount using -t msdosfs on /mnt/da0s1. But I have a little problem when trying to attach my Sony Ericcson W810 mobile phone to FreeBSD 6.2. See what I get: umass0: Sony Ericsson Sony Ericsson W810, rev 2.00/0.00, addr 5 umass1: Sony Ericsson Sony Ericsson W810, rev 2.00/0.00, addr 5 da0 at umass-sim0 bus 0 target 0 lun 0 da0: SEMC Int.Memory Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 - 6 da1 at umass-sim1 bus 1 target 0 lun 0 da1: SEMC Mem-Stick Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 - 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error .. this block repeats many many times for da0 and da1 too. umass0: at uhub4 port 1 (addr 5) disconnected (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry umass0: detached umass1: at uhub4 port 1 (addr 5) disconnected (da1:umass-sim1:1:0:0): lost device (da1:umass-sim1:1:0:0): removing device entry When I plug out the Ericsson, umass1: detached Other data: FreeBSD 6.2, straight from instalation cd: FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC dmesg | grep usb usb0: Intel 82801DB (ICH4) USB controller USB-A on uhci0 usb0: USB revision 1.0 usb1: Intel 82801DB (ICH4) USB controller USB-B on uhci1 usb1: USB revision 1.0 usb2: Intel 82801DB (ICH4) USB controller USB-C on uhci2 usb2: USB revision 1.0 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: Intel 82801DB/L/M (ICH4) USB 2.0 controller on ehci0 usb3: USB revision 2.0 I searched google, more than 100 results with mistake messages, but nothing I can really use. What can be the reason? Do I have to send more data? with best regards, tnx in advance SM ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
