Re: Trouble with SMC2602W wireless card
On Thu, Feb 20, 2003 at 07:22:44PM +0100, Pascal Giannakakis wrote: David Brodbeck schrieb: I'm beginning to suspect there are multiple versions of this card. Some of the websites I've found seem to suggest a card that consists of a removable PCMCIA card in a PCI adapter. What I have doesn't resemble that at all. I've already been burned by the D-Link DWL-650 PCMCIA card I bought for my laptop -- it was on a supported list for Linux, but what I didn't realize is that there are no less than three completely different cards with the same part number! This kind of thing is enough to make you want to give up doing wireless networking under open-source operating systems. I haven't tried Andrea's suggestion yet, but I hope to this weekend. *sigh* You are right, David. I was in exactly the same situation, I got blinded by a D-Link 650+. Of course no trace of the mentioned chip in wi(4). After that i tried to find a Linksys card. Well, i found one, but - life can be so cruel - it did not have the listed Prism Chip, it was either AMD or Admtek. 3rd try: SMC 2602W. Now i got the SMC 2602W (the package says it is version 2 :/ ) which has a Admtek ADM8211 chip on it. BLOODY! I plugged in the card, and hey, of course it does NOT work. pciconf -v -l: [EMAIL PROTECTED]:8:0: class=0x028000 card=0x260210b8 chip=0x82011317 rev=0x11 hdr=0x00 vendor = 'Admtek Inc' class= network Andrea's tip does not help here, as there is no information in pci_vendors what to add exactly in wi_if_pci.c. Well, who can help now? Where to go next? Unfortunatly I got this version of the SMC2602W card too :/ Andrea's tip will not help us here because the wi driver does not understand the Admtek ADM8211 chip :( What did you guys end up with, did you buy a new card or what? For what it's worth the vendor is 0x1317 and the device is 0x8201 (if you put those two numbers together you get the chip from pciconf :) -- Morten Rodal pgp0.pgp Description: PGP signature
Re: Trouble with SMC2602W wireless card
On Thu, Feb 20, 2003 at 07:22:44PM +0100, Pascal Giannakakis wrote: Now i got the SMC 2602W (the package says it is version 2 :/ ) which has a Admtek ADM8211 chip on it. BLOODY! I plugged in the card, and hey, of course it does NOT work. pciconf -v -l: [EMAIL PROTECTED]:8:0: class=0x028000 card=0x260210b8 chip=0x82011317 rev=0x11 hdr=0x00 vendor = 'Admtek Inc' class= network Andrea's tip does not help here, as there is no information in pci_vendors what to add exactly in wi_if_pci.c. Well, who can help now? Where to go next? Unfortunatly I got this version of the SMC2602W card too :/ Andrea's tip will not help us here because the wi driver does not understand the Admtek ADM8211 chip :( What did you guys end up with, did you buy a new card or what? For what it's worth the vendor is 0x1317 and the device is 0x8201 (if you put those two numbers together you get the chip from pciconf :) -- Morten Rodal Another FWIW - This is the same chipset as is used in the 32-bit D-Link DWL-650 (NOT +): cardbus1: unknown card (vendor=0x1317, dev=0x8201) KeS To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: Trouble with SMC2602W wireless card
Pascal Giannakakis wrote: Now i got the SMC 2602W (the package says it is version 2 :/ ) which has a Admtek ADM8211 chip on it. BLOODY! I plugged in the card, and hey, of course it does NOT work. pciconf -v -l: [EMAIL PROTECTED]:8:0: class=0x028000 card=0x260210b8 chip=0x82011317 rev=0x11 hdr=0x00 vendor = 'Admtek Inc' class= network Andrea's tip does not help here, as there is no information in pci_vendors what to add exactly in wi_if_pci.c. Well, who can help now? Where to go next? I found a guy who is working on a driver for the Admtek ADM8211 wireless chipset. I've contacted him about my 2602W card, and he's going to try to add it to his driver. Apparently a lot of low-cost cards are using this chipset now. He said he was making progress on the driver but couldn't give me a release date. I think I'm going to wait and see what he comes up with. Until then I may throw the card in a spare computer and install Win98, a NIC, and some kind of bridging software, as a temporary measure. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: Trouble with SMC2602W wireless card
Pascal Giannakakis wrote: ARRGH!!! FFS!!! I ordered 2 of these, based on availability and the list, and now i read i might be unsupported! :( Could NE1 please confirm this card is running under FreeBSD 5.0? I'm beginning to suspect there are multiple versions of this card. Some of the websites I've found seem to suggest a card that consists of a removable PCMCIA card in a PCI adapter. What I have doesn't resemble that at all. I've already been burned by the D-Link DWL-650 PCMCIA card I bought for my laptop -- it was on a supported list for Linux, but what I didn't realize is that there are no less than three completely different cards with the same part number! This kind of thing is enough to make you want to give up doing wireless networking under open-source operating systems. I haven't tried Andrea's suggestion yet, but I hope to this weekend. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: Trouble with SMC2602W wireless card
On Tue, Feb 11, 2003 at 03:32:46PM -0500, David Brodbeck wrote: I bought an SMC2602W wireless PCI card, based on it being listed in the FreeBSD Handbook as supported. However, I can't get the system to recognize it. I get this in dmesg: pci0: unknown card (vendor=0x1317, dev=0x8201) at 8.0 irq 12 I'm running 4.6.2-RELEASE. Do I need to upgrade to a more recent release? Any suggestions? I'm not on the list so please CC replies to me. This sounds familiar :) I've the same problem with my Wireless PCI and like you I based my choice on the 'Supported' List. But, maybe you're luckiest than me so if you want you could try to force the driver to recognize your card. This is how: First, run pciconf -vl and find out your card among those listed.. Then look into /usr/share/misc/pci_vendors to find then IDs. Example: # pciconf -lv none2@pci0:8:0: class=0x028000 card=0x013115e8 chip=0x013115e8 rev=0x01 hdr=0x00 vendor = 'National Datacomm Corp.' device = 'Prism II InstantWave HR PCI card' class= network /usr/share/misc/pci_vendors: 15E8National Datacomm Corp. 0130NCP130 Wireless NIC 0131Prism II InstantWave HR PCI card So our IDs are vendor=0x15E8 ,device=0131 Now that you have your numbers go in '/usr/src/sys/dev/wi' and look for 'if_wi_pci.c' Edit the file and look for these lines : } pci_ids[] = { /* Sorted by description */ {0x10b7, 0x7770, WI_BUS_PCI_PLX, 3Com Airconnect}, {0x16ab, 0x1101, WI_BUS_PCI_PLX, GLPRISM2 WaveLAN}, {0x1260, 0x3873, WI_BUS_PCI_NATIVE, Intersil Prism2.5}, {0x16ab, 0x1102, WI_BUS_PCI_PLX, Linksys WDT11}, {0x1385, 0x4100, WI_BUS_PCI_PLX, Netgear MA301}, {0x1638, 0x1100, WI_BUS_PCI_PLX, PRISM2STA WaveLAN}, {0x111a, 0x1023, WI_BUS_PCI_PLX, Siemens SpeedStream}, {0x16ec, 0x3685, WI_BUS_PCI_PLX, US Robotics 2415}, {0, 0, 0, NULL} }; And add a line with your IDs: {0x111a, 0x1023, WI_BUS_PCI_PLX, Siemens SpeedStream}, --{0x15E8, 0x0131, WI_BUS_PCI_PLX, Prism II InstantWave HR PCI card}, --- {0x16ec, 0x3685, WI_BUS_PCI_PLX, US Robotics 2415}, Then recompile and cross your fingers.. ;) You could try another variant changing WI_BUS_PCI_PLX to WI_BUS_PCI_NATIVE .. Now the kernel should see your card ... about attaching it.. i really don't know.. Bye. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: Trouble with SMC2602W wireless card
On Tue, Feb 11, 2003 at 03:32:46PM -0500, David Brodbeck wrote: I bought an SMC2602W wireless PCI card, based on it being listed in the FreeBSD Handbook as supported. However, I can't get the system to recognize it. I get this in dmesg: pci0: unknown card (vendor=0x1317, dev=0x8201) at 8.0 irq 12 I'm running 4.6.2-RELEASE. Do I need to upgrade to a more recent release? Any suggestions? I'm not on the list so please CC replies to me. This sounds familiar :) I've the same problem with my Wireless PCI and like you I based my choice on the 'Supported' List. But, maybe you're luckiest than me so if you want you could try to force the driver to recognize your card. This is how: First, run pciconf -vl and find out your card among those listed.. Then look into /usr/share/misc/pci_vendors to find then IDs. ARRGH!!! FFS!!! I ordered 2 of these, based on availability and the list, and now i read i might be unsupported! :( Could NE1 please confirm this card is running under FreeBSD 5.0? -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage! To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Trouble with SMC2602W wireless card
I bought an SMC2602W wireless PCI card, based on it being listed in the FreeBSD Handbook as supported. However, I can't get the system to recognize it. I get this in dmesg: pci0: unknown card (vendor=0x1317, dev=0x8201) at 8.0 irq 12 I'm running 4.6.2-RELEASE. Do I need to upgrade to a more recent release? Any suggestions? I'm not on the list so please CC replies to me. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message