Hey folks,
IBM thinkpad p3/450 with a dwl650/prism 2.5 which works with win98 &
knoppix 3.2 but isn't detected with fbsd 4.9-R. Google doesn't seem to
indicate any issues with 4.9 other than a sleep/timeout issue.
I'm d/l'ing 5.1 to give it a try but if I'm missing something silly or
someone has an idea I'd appreciate it. Need this thing up and running by
Wed and would prefer fbsd rather than linux.
It doesn't detect a linksys 10/100 card either. Didn't test it with
Knoppix but this card worked recently with w98. Are there any issues
with thinkpad 390x? dmesg is below.
thanks,
Riley
de ja roux--The feeling that we've cooked this gumbo before.
*
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (447.69-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff
real memory = 536805376 (524224K bytes)
avail memory = 516927488 (504812K bytes)
Preloaded elf kernel "kernel" at 0xc053f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdf40
npx0: on motherboard
npx0: INT 16 interface
pcib0: on motherboard
pci0: on pcib0
agp0: mem
0xf800-0xfbff at device 0.0 on pci0
pcib1: at device 1.0 on
pci0
pci1: on pcib1
pci1: at 0.0 irq 11
isab0: at device 2.0 on pci0
isa0: on isab0
atapci0: port 0x10c0-0x10cf at device 2.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: port 0x1060-0x107f irq
11 at device 2.2 on pci0
usb0: on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip0: port 0x1040-0x104f at
device 2.3 on pci0
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:3 INTA routed to irq 3
pcic0: irq 3 at device 3.0 on pci0
pcic0: PCI Memory allocated: 0x8800
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa
irq]
pccard0: on pcic0
pcic1: irq 11 at device 3.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa
irq]
pccard1: on pcic1
pci0: (vendor=0x11c1, dev=0x0449) at 6.0 irq 11
pci0: (vendor=0x125d, dev=0x1969) at 7.0 irq 5
orm0: at iomem 0xc-0xcbfff on isa0
pmtimer0 on isa0
fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: at port 0x60,0x64 on isa0
atkbd0: flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: at port 0x3c0-0x3df iomem 0xa-0xb on
isa0
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: on ppbus0
plip0: on ppbus0
lpt0: on ppbus0
lpt0: Interrupt-driven port
pccard: card inserted, slot 0
pccard: card removed, slot 0
ad0: 4645MB [10068/15/63] at ata0-master UDMA33
acd0: CDROM at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
pccard: card inserted, slot 0
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
