Re: miibus.ko if_aue.ko crash
On Fri, 16 Jul 2004, Tomoki Taniguchi wrote: SNIP aue0: flags=8802(BROADCAST,SIMPLEX,MULTICAST) mtu 1500 tunnel inet -- ether XX:XX:XX:XX:XX:XX media: Ethernet autoselect (100baseTX full-duplex) status: active vlan: 0 parent interface: none ssid stationname channel 0 authmode NONE powersavemode OFF wepmode OFF weptxkey 1 /SNIP Then at this point if I run dhclient aue0, the system crashes giving me the same errors as when I boot the system with the usb ethernet plugged in. i see a similar response from ifconfig when using an ADMTEK AN986 USB Ethernet device with HomePNA. i've submitted patch if_aue.c at http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/61300 but it works only on 4.9-RELEASE. with 4.10-RELEASE (and thus -STABLE), that patch won't work anymore. if anyone wants the updated patch for 4.10 and STABLE, let me know. nevertheless, to get back to the point, the device in both HomePNA media and Ethernet media works fine without crashing, though ifconfig produces the same output you see. Regards, /\_/\ All dogs go to heaven. [EMAIL PROTECTED](0 0)http://www.alphaque.com/ +==oOO--(_)--OOo==+ | for a in past present future; do| | for b in clients employers associates relatives neighbours pets; do | | echo The opinions here in no way reflect the opinions of my $a $b. | | done; done | +=+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
miibus.ko if_aue.ko crash
I recently installed FreeBSD 4.9 to an old laptop I came by. It is a Sharp Mebius PC-PJ1-U23. Basic hardware information can be found here http://www.egota.org/MebiusNotePJ.html. I am using a D-Link DSB-650TX USB ethernet. it uses the if_aue.ko driver. The generic kernel on the FreeBSD 4.9 install disc works fine. I update the source and build and install using the GENERIC kernel conf file. When I reboot the kernel panics and crashes. SNIP module_register: module miibus/ukphy already exists! linker_file_sysinit miibus.ko failed to register! 17 /SNIP When I unplug the usb and reboot the kernel works fine. Once it is fully booted, I plug the usb ethernet back in and I get. SNIP aue0: D-Link Corp. DSB-650TX USB Ethernet, rev 1.10/1.01, addr 2 aue0: Ethernet address: XX:XX:XX:XX:XX:XX miibux0: MII bus on aue0 ukphy0: Generic IEEE 802.3u media interface on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto /SNIP The system doesn't crash but when I run ifconfig it is obvious something is wrong SNIP aue0: flags=8802(BROADCAST,SIMPLEX,MULTICAST) mtu 1500 tunnel inet -- ether XX:XX:XX:XX:XX:XX media: Ethernet autoselect (100baseTX full-duplex) status: active vlan: 0 parent interface: none ssid stationname channel 0 authmode NONE powersavemode OFF wepmode OFF weptxkey 1 /SNIP Then at this point if I run dhclient aue0, the system crashes giving me the same errors as when I boot the system with the usb ethernet plugged in. Does anyone know what would be causing this and how I can fix the issue? TIA, Tomoki Taniguchi ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]