no subject (file transmission)
1. I am running freeBSd ssd 5.2.1 on ~ntel motherboard (D865GBL) with a intel 3.2 GHZ pentium 4 cpu (BX80546GP320). I have a hp laserjet 1300 connected to a parallell port with the following communications mode: lptcontrol -i -d /dev/lpt0 I have no problems printing either plane text or groff data. But after many print jobs, I get the following console message: stray irq 7. I don't know what this means. Do you know what it means, and have any suggestions for fixing it. 2. My full email address is [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
no subject (file transmission)
1. I am running freeBSd ssd 5.2.1 on ~ntel motherboard (D865GBL) with a intel 3.2 GHZ pentium 4 cpu (BX80546GP320). Intel tells me that the motherboard follows Intel MP specification version 1.4. The rerelease notes in HARDWARWE.TXT on the installation cdrom says the kernel automatically detects hperthreading capability and enables option smp. When I logon, I have the option of enabling or disabling acpi. There is no way I can get the system to function in a hyperthreading mode. I can only operate the computer by disabling hyperthreading on the BIOS and by not enabling acpi when I logon. This seems paradoxical since the literature says that freeBSD 5.2.1 supports hyperthreading, since I have all the appropriate hardware, and since I am enabling the proper option during logon. Do you have a solution? 2. My full email address is [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: no subject (file transmission)
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Chan Sent: Saturday, July 24, 2004 2:09 PM To: [EMAIL PROTECTED] Subject: no subject (file transmission) 1. I am running freeBSd ssd 5.2.1 on ~ntel motherboard (D865GBL) with a intel 3.2 GHZ pentium 4 cpu (BX80546GP320). Intel tells me that the motherboard follows Intel MP specification version 1.4. The rerelease notes in HARDWARWE.TXT on the installation cdrom says the kernel automatically detects hperthreading capability and enables option smp. When I logon, I have the option of enabling or disabling acpi. There is no way I can get the system to function in a hyperthreading mode. I can only operate the computer by disabling hyperthreading on the BIOS and by not enabling acpi when I logon. This seems paradoxical since the literature says that freeBSD 5.2.1 supports hyperthreading, since I have all the appropriate hardware, and since I am enabling the proper option during logon. Do you have a solution? 2. My full email address is [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Hello, I had some grief with the similar Intel 865 Perl board with p4 3.0 prescott cpu... I used 5.2.1, hyperthreading mode was working but if ACPI was enabled the system just crash at reboot.. Workaround was to disable acpi or upgrade to 5.2 current... Luckily I could replace this motherboard to an ASUS P4C800-E Deluxe Andras ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]