Re: problem with network card in P35+ICH9
I own a MSI P35 Neo with following chips [1]: "One Ultra DMA 66/100/133 IDE controller integrated in Marvell(R) 88SE6111" "SATAII controller integrated in ICH9/ICH9R and Marvell(R) 88SE6111 chipest" "Supports AHCI controller with SATA RAID 0/1/0+1/5 or JBOD mode by ICH9R" "Supports one SATAII port by 88SE6111" "Supports PCI Express LAN 10/100/1000 Fast Ethernet by Realtek 8111B" 1st problem: PATA DVD drive: boots the kernel from install cd -> can't mount root fs from cd for installation get 6 at boot loader and set hw.ata.atapi_dma=0 boot SATA works fine. i have similar motherboard, forget about Realtek 8111B it's terrible. buy some normal network card, or - use realtek but with hardware checksumming off. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: problem with network card in P35+ICH9
On Dec 9, 2007 4:00 PM, Playnet <[EMAIL PROTECTED]> wrote: > > > > > I have a server based gigabyte MB with core2 quadro, > > P35+ICH9 > > > > From the below let me guess it is in the MSI Neo familiy of > > Mobo's > > you will want the following patches for re: > > > > http://people.freebsd.org/~yongari/re/re.HEAD.patch > > > > If I am right about the Mobo you should also be getting > > mismatching > > reports on your SATA drives as well the inablity to have > > SATA and > > PATA > > together you will want the following patches to fix that: > > http://www.flosoft-systems.com/patchs/ahci.diff > > http://www.flosoft-systems.com/patchs/i82801-marvell.diff > > > > Patch for RE not compiling.. When these pathes will > be included in the kernel? > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > I own a MSI P35 Neo with following chips [1]: "One Ultra DMA 66/100/133 IDE controller integrated in Marvell(R) 88SE6111" "SATAII controller integrated in ICH9/ICH9R and Marvell(R) 88SE6111 chipest" "Supports AHCI controller with SATA RAID 0/1/0+1/5 or JBOD mode by ICH9R" "Supports one SATAII port by 88SE6111" "Supports PCI Express LAN 10/100/1000 Fast Ethernet by Realtek 8111B" 1st problem: PATA DVD drive: boots the kernel from install cd -> can't mount root fs from cd for installation 2nd problem: PATA HDD drive: is not recognized too 3rd problem: I can't tell you if the nic works because i can't boot any FreeBSD Live CD (Linux too) nor install FreeBSD to a PATA drive The SATA ports are recognized by the system as far as i saw on the boot messages so the ICH9/ICH9R shouldn't be the problem. Google won't tell me much about the Marvell 88SE6111 so i wonder if someone's out there who can code or already has a compiled driver driver for this piece of hardware. Unfortunately I can't compile my own kernel because I only have this one computer... There was a conversation on current@ a few months ago [2] but i think it stopped without any result. Last but not least a few links I found while searching for help: - http://lists.freebsd.org/pipermail/freebsd-bugs/2007-August/025584.html - http://butcher.heavennet.ru/patches/kernel/ata/marvell/README.txt [1] http://www.msi-computer.de/index.php?func=proddesc&prod_no=1215&maincat_no=1 [2] http://lists.freebsd.org/pipermail/freebsd-current/2007-October/077591.html -- ~ vb ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: problem with network card in P35+ICH9
> I have a server based gigabyte MB with core2 quadro, P35+ICH9 From the below let me guess it is in the MSI Neo familiy of Mobo's you will want the following patches for re: http://people.freebsd.org/~yongari/re/re.HEAD.patch If I am right about the Mobo you should also be getting mismatching reports on your SATA drives as well the inablity to have SATA and PATA together you will want the following patches to fix that: http://www.flosoft-systems.com/patchs/ahci.diff http://www.flosoft-systems.com/patchs/i82801-marvell.diff Patch for RE not compiling.. When these pathes will be included in the kernel? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: problem with network card in P35+ICH9
I think yes. Probably i have Gigabyte GA-P35-S3R (Realtek RTL8111B PCI-E (GbE) in S3R, my model i check tomorrow) is your phy (mii) detected OK? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: problem with network card in P35+ICH9
is your phy (mii) detected OK? FreeBSD 6.2 server# ifconfig -a re0: flags=8843 mtu 1500 options=1b inet 192.168.2.54 netmask 0xff00 broadcast 192.168.2.255 ether 00:1a:4d:53:54:4d media: Ethernet autoselect (none) status: no carrier server# dmesg |grep re0 re0: port 0xc000-0xc0ff mem 0xf900-0xf9000fff irq 16 at device 0.0 on pci4 miibus0: on re0 re0: Ethernet address: 00:1a:4d:53:54:4d re0: [FAST] But these lan works good into windows with the same cable and connection. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: problem with network card in P35+ICH9
Playnet wrote: > > > I have a server based gigabyte MB with core2 quadro, P35+ICH9 >From the below let me guess it is in the MSI Neo familiy of Mobo's you will want the following patches for re: http://people.freebsd.org/~yongari/re/re.HEAD.patch If I am right about the Mobo you should also be getting mismatching reports on your SATA drives as well the inablity to have SATA and PATA together you will want the following patches to fix that: http://www.flosoft-systems.com/patchs/ahci.diff http://www.flosoft-systems.com/patchs/i82801-marvell.diff > > FreeBSD 6.2 > > server# ifconfig -a re0: > flags=8843 mtu 1500 > options=1b inet 192.168.2.54 > netmask 0xff00 broadcast 192.168.2.255 ether 00:1a:4d:53:54:4d > media: Ethernet autoselect (none) status: no carrier > server# dmesg |grep re0 re0: Ethernet> port 0xc000-0xc0ff > mem 0xf900-0xf9000fff irq 16 at device 0.0 on pci4 miibus0: bus> on re0 re0: Ethernet address: 00:1a:4d:53:54:4d re0: [FAST] > But these lan works good into windows with the same cable and > connection. ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > -- Aryeh M. Friedman FloSoft Systems Developer, not business, friendly http://www.flosoft-systems.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
problem with network card in P35+ICH9
I have a server based gigabyte MB with core2 quadro, P35+ICH9 FreeBSD 6.2 server# ifconfig -a re0: flags=8843 mtu 1500 options=1b inet 192.168.2.54 netmask 0xff00 broadcast 192.168.2.255 ether 00:1a:4d:53:54:4d media: Ethernet autoselect (none) status: no carrier server# dmesg |grep re0 re0: port 0xc000-0xc0ff mem 0xf900-0xf9000fff irq 16 at device 0.0 on pci4 miibus0: on re0 re0: Ethernet address: 00:1a:4d:53:54:4d re0: [FAST] But these lan works good into windows with the same cable and connection. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
