RELENG_4_4: random kernel traps with ipfilter(?)
hi. i've cvsup'ed yesterday with RELENG_4_4 tag and got strange traps and freezes with ipfilter(?) (both kernel compiled in and module). maximum uptime was about 75 minutes without any messages in /var/log/messages. haven't made debug kernel yet - is it known `feature' or I am the only lamb who put RELENG_4_4 on production server ? i would appreciate any way (other then debug kernel) to find out the reason. -- VAMPIRO-RIPN p.'s i've recvsup'ed source tree several times from different servers. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: Building x11/gnome from ports
On Sun, Sep 16, 2001 at 09:15:40PM -0400, Erik Gault wrote: i was able to get it to build a few weeks ago by independently building the guile-gnome package and then installing x11/gnome. i may have done some other minor fiddling, i can't remember exactly, but i was able to get it to build. sorry i don't have more detailed information... erik While trying to install x11/gnome from the ports tree, one of its runtime dependancies is x11-toolkits/guile-gnome which fails to build. It dies with the following: - === Building for guile-gnome-0.20_3 make all-recursive Making all in guile-gnome Making all in zvt Making all in bonobo Making all in gtkhtml guile -l ../../guile-gtk/gtk/config.scm -s ./../../guile-gtk/build-guile-gtk -I ../../guile-gtk glue ./gtkhtml.defs .tmpg mv .tmpg gtkhtml-glue.c ERROR: In procedure open-file: ERROR: No such file or directory: ../../guile-gtk/gtk/config.scm *** Error code 2 Stop in /usr/ports/x11-toolkits/guile-gnome/work/gnome-guile-0.20/guile-gno me/gtkhtml. I compiled gnome this night. It stopped at the same place. I went to that directory, did `make clean` `make` and everything was OK again. Gnome installed full way. *** Error code 1 - There is still an open PR ports/29463 but thats a compilation problem. This seems to be parsing a file called ../../guile-gtk/gtk/config.scm which doesn't exist, ../../guile-gtk/gtk/config.scm.in exists though and if you try to use it, errors, ERROR: Unbound variable: @USING_LTDL_SCM@ appear. Any ideas? The ports tree is cvsupped off RELEASE_4_4_0 yesterday. TIA, Jarrod Sayers Information Technologist School of Communication, Information and New Media University of South Australia, Magill Campus. Phone: +61 8 83024045 Fax: +61 8 83024745 To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message -- __o regards, Gunnar ---_ \,_ email: [EMAIL PROTECTED] (_)/ (_) To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
I WILL TEACH YOU TO HAVE SEX - MY CAN IS ON FOR YOU
Below is the result of your feedback form. It was submitted by ANNA ([EMAIL PROTECTED]) on Monday, September 17, 2001 at 08:33:34 --- message: Hello my friend My cam is always on for you.for your sex I cannot forget all the words that you told me last saturday while my wet pussy was open for you. Now you can connect to my CAM directly from my home page http://www.freebox.com/livesex I will teach you how to do. I have a new software for that. You'll find me nude waiting you. Don't leave me alone without you Anna --- To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: FIXME! snd_pcm.ko kernel panic
On Fri, Sep 14, 2001 at 06:05:11PM -0400, Brad Laue wrote: Upon patching the sources and recompiling, I kldunloaded snd_pcm.ko while snd_maestro3.ko was still loaded, and attempted to play an mp3; kernel panic ensued. Brad You need to make sure you've recompiled both snd_pcm.ko and snd_maestro3.ko by doing ``make'' in each of /sys/modules/sound/pcm and /sys/modules/sound/driver/maestro3 followed by ``make install''. -- +---+-+ |George Reid| FreeBSD Committer | | +44 7740 197460 | [EMAIL PROTECTED] | +---+-+ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: installworld error
On Sun, Sep 16, 2001 at 08:45:48PM -0600, z thompson wrote: I'm getting the following error with make installworld: if [ -h /usr/include/ufs/ffs ]; then rm -f /usr/include/ufs/ffs; fi if [ -h /usr/include/ufs/mfs ]; then rm -f /usr/include/ufs/mfs; fi if [ -h /usr/include/ufs/ufs ]; then rm -f /usr/include/ufs/ufs; fi if [ -h /usr/include/dev/ppbus ]; then rm -f /usr/include/dev/ppbus; fi if [ -h /usr/include/dev/usb ]; then rm -f /usr/include/dev/usb; fi if [ -h /usr/include/machine ]; then rm -f /usr/include/machine; fi mtree -deU -f /usr/src/include/../etc/mtree/BSD.include.dist -p /usr/include cd /usr/src/include/../sys; install -C -o root -g wheel -m 444 cam/*.h /usr/include/cam install: not found *** Error code 127 Stop in /usr/src/include. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Any ideas? I cvsupped early on 8/16. Looks like you have not /usr/obj with complete buildworld. -- Rgdz,/\ Sergey Osokin aka oZZ, \ / ASCII RIBBON CAMPAIGN [EMAIL PROTECTED]X AGAINST HTML MAIL http://freebsd.org.ru/~osa/ / \ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
pci/pcic cards
hi, I have 2 different cards: (pcmcia interface?) pci1: unknown card (vendor=0x16ab, dev=0x1103) at 7.0 irq 9 pci1: unknown card (vendor=0x8086, dev=0x1042) at 7.0 irq 9 any way i can get them to work? I also have an Orinoco/Lucent isa which is almost working - once i get a free irq :-) thanks, danny To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: FIXME! snd_pcm.ko kernel panic
Upon patching the sources and recompiling, I kldunloaded snd_pcm.ko while snd_maestro3.ko was still loaded, and attempted to play an mp3; kernel panic ensued. this should be impossible in two ways: 1. snd_maestro3 depends on snd_pcm so the module system should not permit snd_maestro3 to be present in the systemwithout snd_pcm . 2. if you just load snd_maestro3, snd_pcm will be autoloaded. an autoloaded module cannot be unloaded manually. -cg To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: Building x11/gnome from ports
On Mon, 17 Sep 2001, Gunnar Flygt wrote:
Date: Mon, 17 Sep 2001 09:04:23 +0200
From: Gunnar Flygt [EMAIL PROTECTED]
To: FreeBSD Stable [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Building x11/gnome from ports
[snip]
While trying to install x11/gnome from the ports tree, one of its
runtime dependancies is x11-toolkits/guile-gnome which fails to
build.
It dies with the following:
-
=== Building for guile-gnome-0.20_3
make all-recursive
Making all in guile-gnome
Making all in zvt
Making all in bonobo
Making all in gtkhtml
guile -l ../../guile-gtk/gtk/config.scm -s
./../../guile-gtk/build-guile-gtk -I ../../guile-gtk glue
./gtkhtml.defs .tmpg mv .tmpg gtkhtml-glue.c
ERROR: In procedure open-file:
ERROR: No such file or directory: ../../guile-gtk/gtk/config.scm ***
Error code 2
Stop in
/usr/ports/x11-toolkits/guile-gnome/work/gnome-guile-0.20/guile-gno
me/gtkhtml.
I compiled gnome this night. It stopped at the same place. I went to
that directory, did `make clean` `make` and everything was OK again.
Gnome installed full way.
Found the problem, it appears that a guile-gnome will only build if
gtkhtml is instaled before the configure script is run. The configure
script of guile-gnome goes looking for gtkhtml when its run and if it does
not find it, the guile-gnome port wont build. But as a part of the
guile-gnome code is gtkhtml, this is why it works the second time around,
after a 'make clean' the configure script has to be re-run, and it finds
it.
Can someone test this patch for the ports Makefile making it install
gtkhtml before the guile-gnome port? Im out of machines without it :)
--- ports/x11-toolkits/guile-gnome/Makefile Sun Sep 16 15:38:10 2001
+++ ports/x11-toolkits/guile-gnome/Makefile.new Mon Sep 17 18:20:15 2001
@@ -15,6 +15,8 @@
MAINTAINER=[EMAIL PROTECTED]
+BUILD_DEPENDS= gnome-gtkhtml-editor:${PORTSDIR}/www/gtkhtml
+
LIB_DEPENDS= guilegtk-1.2.0:${PORTSDIR}/x11-toolkits/guile-gtk
USE_LIBTOOL= yes
I may be barking up the wrong tree but my builds have begun working again.
Jarrod Sayers
Information Technologist
School of Communication, Information and New Media
University of South Australia, Magill Campus.
Phone: +61 8 83024045
Fax: +61 8 83024745
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-stable in the body of the message
mergemaster error in 4.4-STABLE?
(cvsup and build yesterday with install today) after doing installworld I ran mergemaster. The below is the output of cd /dev /bin/sh MAKEDEV all: *** You installed a new /dev/MAKEDEV script, so make sure that you run 'cd /dev /bin/sh MAKEDEV all' to rebuild your devices Would you like to run it now? y or n [n] y Running cd /dev /bin/sh MAKEDEV all MAKEDEV: arith: syntax error: ^Hà\x85^N^H^\\x86^N^HÈ\x85^N^Hà\x85^N^Hé\x85^N^Hë\x85^N^Hî\x85^N^H^\\x86^N^H bad node: mknod i4bteld1 Is this something to worry about? Regards +-- Dan Larsson -+- Tyfon Svenska AB -+- DL1999-RIPE 2AA5 90AE 5185 5924 1E0B 1A99 EC8A EA84 406B 06B9 To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: FreeBSD Books
On Sat, Sep 15, 2001 at 11:25:15PM -0500, Scott Corey wrote: Quite awhile back I remember that there were some FreeBSD books in the making i.e. Advanced BSD System Administration provisional title and BSD in a Nutshell what happened to them? Still in progress, I believe. BSD in a Nutshell is being written by Brett Glass, Advanced BSD System Administration (I think that's the correct title) is being written by Greg Lehey. N -- FreeBSD: The Power to Serve http://www.freebsd.org/ FreeBSD Documentation Project http://www.freebsd.org/docproj/ --- 15B8 3FFC DDB4 34B0 AA5F 94B7 93A8 0764 2C37 E375 --- PGP signature
Re: 4.4RC5: snd module testing (Test #1)
Also, I get /kernel: csa: card is unknown/invalid SSID (CS4610) and /kernel: csa0: CS4610/CS4611 mem 0x5000-0x500f,0x5010-0x5010f irq 11 at device 6.0 on pci0. - I have a Thinkpad 600e (2645-4au) with the CS4610 PCI Accelerator and a CS4239 ISA audio sound chip. we do not support the cs46xx with an isa codec rather than an ac97 codec. this configuration is not documented, and while i or one of the other sound coders may be able to figure it out, none of us have hardware with this setup. unless such hardware makes it into our hands, support is unlikely. i should add that as far as i know you are the first person with this setup to run freebsd. Actually, a *LOT* of FreeBSD developers, including a couple of former/current core members, have this same hardware setup. Nate To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: [SOLVED] Broken sound with 4.4-RC
On Mon, Sep 17, 2001 at 09:24:46PM -0500, Mike Meyer wrote: There have been multiple reports of gkrellm causing SMP systems to freeze - more accurately, gkrellm plugins cause this to happen. Which prompts me to ask if you are running SMP, and if you have any gkrellm plugins running. My system has single Celeron-300A with Iwill BD100+ motherboard. And yes, I run gkrellm's plugin reading sensor information. FWIW, if you define WITHOUT_SENSOR when you install gkrellm, it will not turn on the SUID bit on the binary. I've discovered this reading Makefile of port. Now, without SUID gkrellm does not show sensors states. This is not a problem for me. Eugene Grosbein To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: [SOLVED] Broken sound with 4.4-RC
Eugene Grosbein [EMAIL PROTECTED] types: On Mon, Sep 17, 2001 at 09:24:46PM -0500, Mike Meyer wrote: There have been multiple reports of gkrellm causing SMP systems to freeze - more accurately, gkrellm plugins cause this to happen. Which prompts me to ask if you are running SMP, and if you have any gkrellm plugins running. My system has single Celeron-300A with Iwill BD100+ motherboard. And yes, I run gkrellm's plugin reading sensor information. Gkrellm's sensor reading code isn't a plugin, it's built into gkrellm. Note that it makes lots of assumptions about the hardware that may not be true. If I try and run it using the SMB interface, it locks the machine up instantly when it hits the second SMB in the system. FWIW, if you define WITHOUT_SENSOR when you install gkrellm, it will not turn on the SUID bit on the binary. I've discovered this reading Makefile of port. Now, without SUID gkrellm does not show sensors states. This is not a problem for me. I'm running Dual Xeon PIIs. Running gkrellm with the sensor mode enabled and displaying works fine, including what little audio playback I do. However, if I enable a plugin - *any* plugin - the system will freeze up, possibly in as little as 15 minutes, possibly hours later. More plugins seem to make it happen faster. I believe there was a system change that's causing this, but haven't set down to chase down the problem. That I get a hard freeze doesn't help much. Final note: if plugins worked properly, I'd love to do a healthd plugin. Healthd has a number of advantages over the gkrellm code, like working reliably with more hardware, not locking the system up if I use it in SMB mode, being able to get information for both CPUs, being able to monitor more than one system, etc. mike -- Mike Meyer [EMAIL PROTECTED] http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
/kernel: i4b-L1 ifpi_isac_irq: unit 0: CRC error
Hello, I installed freebsd 4.3 last night on my old P100 with 64mb and a AVM Fritz Card PCI. It should run as a isdn-gateway for my network. The kernel compilation with i4b-00.96.00 runs without a problem and the rest of the isdn configuration I want to do later. After the reboot I have got this messages permanently on stdout: Sep 17 07:25:00 gateway /kernel: i4b-L1 ifpi_isac_irq: unit 0: CRC error Sep 17 07:25:00 gateway /kernel: i4b-L1 ifpi_isac_irq: unit 0: Receive Aborted error When I do a Warm Boot to my Linux System, I have got this messages: Sep 17 09:56:44 gateway kernel: ippp0: dialing 10 0191011... Sep 17 09:56:50 gateway kernel: isdn: HiSax,ch0 cause: E001B Sep 17 09:56:52 gateway kernel: isdn_net: local hangup ippp0 Because of this, I must Power Off my box to run the isdn on Linux again. I am new to FreeBSD and I don´t not what Info´s you need, here is all what I got: 1) dmesg 2) /var/log/messages 3) Kernel CONF 4) ifconfig can anyone help me ? Thanks in advance Thorsten ==dmesg== Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #0: Sun Sep 16 21:13:44 GMT 2001 [EMAIL PROTECTED]:/usr/src/sys/compile/GATEWAY Timecounter i8254 frequency 1193182 Hz CPU: Pentium/P54C (100.07-MHz 586-class CPU) Origin = GenuineIntel Id = 0x525 Stepping = 5 Features=0x1bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8 real memory = 67108864 (65536K bytes) config di pcic0 config di sn0 config di lnc0 config di ie0 config di fe0 config di ed0 config di cs0 config di bt0 config di aic0 config di aha0 config di adv0 config q avail memory = 60870656 (59444K bytes) Preloaded elf kernel kernel at 0xc0462000. Preloaded userconfig_script /boot/kernel.conf at 0xc046209c. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard pci0: PCI bus on pcib0 atapci0: Generic PCI ATA controller mem 0xf400-0xf4001fff at device 1.0 on pci0 atapci0: Busmastering DMA not supported rl0: RealTek 8139 10/100BaseTX port 0x6000-0x60ff mem 0xf4002000-0xf40020ff irq 11 at device 8.0 on pci0 rl0: Ethernet address: 00:e0:7d:74:bc:7b miibus0: MII bus on rl0 rlphy0: RealTek internal media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: S3 ViRGE DX/GX graphics accelerator at 9.0 irq 10 ifpi0: AVM Fritz!Card PCI port 0x6100-0x611f mem 0xf4003000-0xf400301f irq 9 at device 10.0 on pci0 ifpi0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) ifpi0: passive stack unit 0 isa0: ISA bus on motherboard fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 i4btel: 2 ISDN telephony interface device(s) attached i4brbch: 4 raw B channel access device(s) attached i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression) i4bctl: ISDN system control port attached i4btrc: 4 ISDN trace device(s) attached i4bisppp: 4 ISDN SyncPPP device(s) attached (VJ header compression) i4b: ISDN call control device attached ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 6197MB IBM-DHEA-36481 [12592/16/63] at ata0-master BIOSPIO acd0: CDROM CD-540E at ata1-master using BIOSPIO Mounting root from ufs:/dev/ad0s2a ==/var/log/messages== Sep 17 07:21:52 gateway /kernel: Copyright (c) 1992-2001 The FreeBSD Project. Sep 17 07:21:52 gateway /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Sep 17 07:21:52 gateway /kernel: The Regents of the University of California. All rights reserved. Sep 17 07:21:52 gateway /kernel: FreeBSD 4.3-RELEASE #0: Sun Sep 16 21:13:44 GMT 2001 Sep 17 07:21:52 gateway /kernel: [EMAIL PROTECTED]:/usr/src/sys/compile/GATEWAY Sep 17 07:21:52 gateway /kernel: Timecounter i8254 frequency 1193182 Hz Sep 17 07:21:52 gateway /kernel: CPU: Pentium/P54C (100.07-MHz 586-class CPU) Sep 17 07:21:52 gateway /kernel: Origin = GenuineIntel Id = 0x525 Stepping = 5
Re: Cisco Aironet 350..
Sergey Eremin [EMAIL PROTECTED] probably said: In other words Aironet 350 works fine with 4-stable? I'm using one to type this. Works just fine. ancontrol works just fine with some earlier versions but the an driver got various improvements in -STABLE. P. -- pir[EMAIL PROTECTED] [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: Problems getting STABLE running on a VAIO 505TL
Thanks! Now this should go in the docs somewhere. Later, George To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
Re: Cisco Aironet 350..
On Tue, 18 Sep 2001, Sergey Eremin wrote: sundevil# wicontrol -i an0 wicontrol: SIOCGWAVELAN: Operation not permitted Sep 17 22:39:16 sundevil /kernel: an0: seek to record failed You might want to consider using ifconfig (to the extent possible); that way, you don't need to use a different control program depending on which device you're using. In other words Aironet 350 works fine with 4-stable? It works, and it works perfectly! I didnt have a clue that the 'wireless-commands' were builtin in ifconfig, so smart, so simple. sundevil# ifconfig an0 an0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 10.0.1.10 netmask 0xff00 broadcast 10.0.1.255 inet6 fe80::240:96ff:fe50:271a%an0 prefixlen 64 scopeid 0x7 ether 00:40:96:50:27:1a media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) status: associated ssid monkey stationname FreeBSD channel 7 authmode OPEN powersavemode OFF powersavesleep 200 wepmode OFF weptxkey 1 wepkey 1:64-bit /calle -- Calle Lidström [EMAIL PROTECTED] Data Network Engineer - Tele2 Internet Operations. Tele2, Borgarfjordsgatan 16, Box 62, 164 94 Kista, SWEDEN Phone: +46-8-5626 4000 Fax: +46-8-5626 4746 SwipNet - The Swedish IP Network To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
