Re: Atheros (ath) MSI wireless embedded chipset fails to attach on 7.0-STABLE
On Wed, Jul 2, 2008 at 3:54 PM, Sam Leffler [EMAIL PROTECTED] wrote: Alexander Sack wrote: Hello: I have installed FreeBSD-7.0-amd64 stable on my new AMD X2 Turon based notebook, a MSI-1710A (GX710Ax) which has a generic embedded controller. During boot up I notice that ATH complains with: ath_rate: version 1.2 SampleRate bit-rate selection algorithm ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) ath0: Atheros 5424/2424 mem 0xfd7f-0xfd7f irq 16 at device 0.0 on pci2 ath0: Reserved 0x1 bytes for rid 0x10 type 3 at 0xfd7f ath0: [MPSAFE] ath0: [ITHREAD] ath0: unable to attach hardware; HAL status 13 device_attach: ath0 attach returned 6 HAL status 13 from the header file seems to indicate that the 7.0-STABLE driver doesn't support my hardware revision. Here is my pciconf -l output: [EMAIL PROTECTED]:0:0:0: class=0x06 card=0x42cd1462 chip=0x79101002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:2:0: class=0x060400 card=0x42cd1462 chip=0x79131002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:4:0: class=0x060400 card=0x42cd1462 chip=0x79141002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:6:0: class=0x060400 card=0x42cd1462 chip=0x79161002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:7:0: class=0x060400 card=0x42cd1462 chip=0x79171002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:18:0:class=0x01018f card=0x42cd1462 chip=0x43801002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:0: class=0x0c0310 card=0x42cd1462 chip=0x43871002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:1: class=0x0c0310 card=0x42cd1462 chip=0x43881002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:2: class=0x0c0310 card=0x42cd1462 chip=0x43891002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:3: class=0x0c0310 card=0x42cd1462 chip=0x438a1002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:4: class=0x0c0310 card=0x42cd1462 chip=0x438b1002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:5: class=0x0c0320 card=0x42cd1462 chip=0x43861002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:20:0: class=0x0c0500 card=0x42cd1462 chip=0x43851002 rev=0x14 hdr=0x00 [EMAIL PROTECTED]:0:20:1:class=0x01018a card=0x42cd1462 chip=0x438c1002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:20:2: class=0x040300 card=0x42cd1462 chip=0x43831002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:20:3: class=0x060100 card=0x42cd1462 chip=0x438d1002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:20:4: class=0x060401 card=0x chip=0x43841002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:24:0: class=0x06 card=0x chip=0x11001022 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:24:1: class=0x06 card=0x chip=0x11011022 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:24:2: class=0x06 card=0x chip=0x11021022 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:24:3: class=0x06 card=0x chip=0x11031022 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:1:0:0: class=0x03 card=0x42cd1462 chip=0x95811002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:1:0:1: class=0x040300 card=0xaa081462 chip=0xaa081002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:2:0:0:class=0x02 card=0x10261a3b chip=0x001c168c rev=0x01 hdr=0x00 [EMAIL PROTECTED]:5:0:0: class=0x02 card=0x42cd1462 chip=0x816810ec rev=0x01 hdr=0x00 [EMAIL PROTECTED]:6:4:0:class=0x060700 card=0x42cd1462 chip=0x71341217 rev=0x21 hdr=0x02 [EMAIL PROTECTED]:6:4:2: class=0x080500 card=0x42cd1462 chip=0x71201217 rev=0x01 hdr=0x00 [EMAIL PROTECTED]:6:4:3: class=0x068000 card=0x42cd1462 chip=0x71301217 rev=0x01 hdr=0x00 [EMAIL PROTECTED]:6:4:4: class=0x0c0010 card=0x42cd1462 chip=0x00f71217 rev=0x02 hdr=0x00 ath0 is listed as rev=0x01 so I'm a little confused why I got HAL status 13. Does anyone know if this chipset is supported in 7.0-STABLE? If not, is it possible to try CURRENT on 7.0 which may fix it? I've attached my complete dmesg output. Again, any feedback would be much appreciated! Try the hal in http://www.freebsd.org/~sam. Again Sam, thanks for this, it worked for me... -aps ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Atheros (ath) MSI wireless embedded chipset fails to attach on 7.0-STABLE
Hello: I have installed FreeBSD-7.0-amd64 stable on my new AMD X2 Turon based notebook, a MSI-1710A (GX710Ax) which has a generic embedded controller. During boot up I notice that ATH complains with: ath_rate: version 1.2 SampleRate bit-rate selection algorithm ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) ath0: Atheros 5424/2424 mem 0xfd7f-0xfd7f irq 16 at device 0.0 on pci2 ath0: Reserved 0x1 bytes for rid 0x10 type 3 at 0xfd7f ath0: [MPSAFE] ath0: [ITHREAD] ath0: unable to attach hardware; HAL status 13 device_attach: ath0 attach returned 6 HAL status 13 from the header file seems to indicate that the 7.0-STABLE driver doesn't support my hardware revision. Here is my pciconf -l output: [EMAIL PROTECTED]:0:0:0:class=0x06 card=0x42cd1462 chip=0x79101002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:2:0:class=0x060400 card=0x42cd1462 chip=0x79131002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:4:0:class=0x060400 card=0x42cd1462 chip=0x79141002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:6:0:class=0x060400 card=0x42cd1462 chip=0x79161002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:7:0:class=0x060400 card=0x42cd1462 chip=0x79171002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:18:0: class=0x01018f card=0x42cd1462 chip=0x43801002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:0: class=0x0c0310 card=0x42cd1462 chip=0x43871002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:1: class=0x0c0310 card=0x42cd1462 chip=0x43881002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:2: class=0x0c0310 card=0x42cd1462 chip=0x43891002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:3: class=0x0c0310 card=0x42cd1462 chip=0x438a1002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:4: class=0x0c0310 card=0x42cd1462 chip=0x438b1002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:19:5: class=0x0c0320 card=0x42cd1462 chip=0x43861002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:20:0: class=0x0c0500 card=0x42cd1462 chip=0x43851002 rev=0x14 hdr=0x00 [EMAIL PROTECTED]:0:20:1: class=0x01018a card=0x42cd1462 chip=0x438c1002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:20:2: class=0x040300 card=0x42cd1462 chip=0x43831002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:20:3: class=0x060100 card=0x42cd1462 chip=0x438d1002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:20:4: class=0x060401 card=0x chip=0x43841002 rev=0x00 hdr=0x01 [EMAIL PROTECTED]:0:24:0: class=0x06 card=0x chip=0x11001022 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:24:1: class=0x06 card=0x chip=0x11011022 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:24:2: class=0x06 card=0x chip=0x11021022 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:0:24:3: class=0x06 card=0x chip=0x11031022 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:1:0:0:class=0x03 card=0x42cd1462 chip=0x95811002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:1:0:1:class=0x040300 card=0xaa081462 chip=0xaa081002 rev=0x00 hdr=0x00 [EMAIL PROTECTED]:2:0:0:class=0x02 card=0x10261a3b chip=0x001c168c rev=0x01 hdr=0x00 [EMAIL PROTECTED]:5:0:0:class=0x02 card=0x42cd1462 chip=0x816810ec rev=0x01 hdr=0x00 [EMAIL PROTECTED]:6:4:0:class=0x060700 card=0x42cd1462 chip=0x71341217 rev=0x21 hdr=0x02 [EMAIL PROTECTED]:6:4:2:class=0x080500 card=0x42cd1462 chip=0x71201217 rev=0x01 hdr=0x00 [EMAIL PROTECTED]:6:4:3:class=0x068000 card=0x42cd1462 chip=0x71301217 rev=0x01 hdr=0x00 [EMAIL PROTECTED]:6:4:4:class=0x0c0010 card=0x42cd1462 chip=0x00f71217 rev=0x02 hdr=0x00 ath0 is listed as rev=0x01 so I'm a little confused why I got HAL status 13. Does anyone know if this chipset is supported in 7.0-STABLE? If not, is it possible to try CURRENT on 7.0 which may fix it? I've attached my complete dmesg output. Again, any feedback would be much appreciated! -aps unity-dmesg Description: Binary data ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 7.0-STABLE SATA300 detected as SATA150
On Tue, Apr 22, 2008 at 3:11 PM, Abdullah Ibn Hamad Al-Marri [EMAIL PROTECTED] wrote: Hello, FreeBSD 7.0-STABLE #0: Tue Apr 22 17:32:02 UTC 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MX1 Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.63-MHz K8-class CPU) Origin = GenuineIntel Id = 0x6fb Stepping = 11 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0xe3fdSSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM AMD Features=0x20100800SYSCALL,NX,LM AMD Features2=0x1LAHF Cores per package: 2 usable memory = 4276047872 (4077 MB) avail memory = 4106981376 (3916 MB) ACPI APIC Table: INTEL DG31PR FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 Version 2.0 irqs 0-23 on motherboard acpi0: INTEL on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x408-0x40b on acpi0 acpi_hpet0: High Precision Event Timer iomem 0xfed0-0xfed003ff on acpi0 Timecounter HPET frequency 14318180 Hz quality 900 cpu0: ACPI CPU on acpi0 cpu1: ACPI CPU on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge irq 16 at device 1.0 on pci0 pci1: ACPI PCI bus on pcib1 vgapci0: VGA-compatible display port 0xd070-0xd077 mem 0xd020-0xd027,0xc000-0xcfff,0xd010-0xd01f irq 16 at device 2.0 on pci0 pcib2: ACPI PCI-PCI bridge irq 16 at device 28.0 on pci0 pci2: ACPI PCI bus on pcib2 pcib3: ACPI PCI-PCI bridge irq 17 at device 28.1 on pci0 pci3: ACPI PCI bus on pcib3 re0: RealTek 8168/8111B PCIe Gigabit Ethernet port 0xc000-0xc0ff mem 0xd002-0xd0020fff irq 17 at device 0.0 on pci3 miibus0: MII bus on re0 rgephy0: RTL8169S/8110S/8211B media interface PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:19:d1:a7:a4:72 re0: [FILTER] pcib4: ACPI PCI-PCI bridge at device 30.0 on pci0 pci4: ACPI PCI bus on pcib4 isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH7 SATA300 controller port 0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f irq 17 at device 31.2 on pci0 ^^ atapci0: [ITHREAD] ata2: ATA channel 0 on atapci0 ata2: [ITHREAD] ata3: ATA channel 1 on atapci0 ata3: [ITHREAD] pci0: serial bus, SMBus at device 31.3 (no driver attached) acpi_button0: Sleep Button on acpi0 acpi_button1: Power Button on acpi0 atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounters tick every 1.000 msec ad4: 238475MB WDC WD2500KS-00MJB0 02.01C03 at ata2-master SATA150 ^^^ ad6: 715404MB WDC WD7500AAKS-00RBA0 30.04G30 at ata3-master SATA150 SMP: AP CPU #1 Launched! Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/ Not sure if you know this but there should be no speed negotiation/DMA level issues with a native AHCI SATA implementation. If its reported as SATA-150, its probably a hardware issue (with FPDMA and the general DMA architecture of SATA, the driver really has no clue nor should it on what speed the bus speed is - its strictly up to your cable, chipset and drive). I would definitely check what Jeremy mentioned as well as a faulty cable! Long live no more CS jumpers -aps ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Don't recognizing SMP...
On Tue, Apr 8, 2008 at 9:52 AM, John Baldwin [EMAIL PROTECTED] wrote: On Monday 07 April 2008 02:45:47 pm Alexander Sack wrote: On Tue, Apr 1, 2008 at 5:43 AM, Andrei Kolu [EMAIL PROTECTED] wrote: On Monday 31 March 2008 12:31:49 한원희 wrote: I installed FreeBSD 7.0 on HP DL 380. This is a mptable result. # mptable Processors: APIC ID Version State Family Model Step Flags 0 0x14BSP, usable 6 2 1 0x0381 6 0x14AP, usable 15 2 9 0xbfebfbff 2 way cpus are same as 3.0GHz Xeon CPU. But they have different Family, Step, and Flags. SMP does NOT work with cpus with different steppings. You should find other matching pair for smp to work. Then this needs to be FIXED because MANY OEMs ship mixed stepping processors as Intel now supports it FreeBSD itself doesn't enforce this, we use whatever CPUs we find in the table and we don't actually bother reading the family/model/etc. from the APs at all. Assuming this is a non-ancient computer and non-ancient FreeBSD (5.2 or later) then FreeBSD isn't using the MP Table at all but the ACPI MADT table (available via acpidump -t). I would assume that as well. Yes it matters what steppings are mixed in terms of support but Intel DOES support a number of mixed steppings and OEMs like HP have shipped mixed stepping Proliant machines (I was on the fore-front of this issue with another platform so I know this to be fact). In fact there is some public documentation about this is you can stand Intel's search feature on their website :D! -aps ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Don't recognizing SMP...
On Tue, Apr 1, 2008 at 5:43 AM, Andrei Kolu [EMAIL PROTECTED] wrote: On Monday 31 March 2008 12:31:49 한원희 wrote: I installed FreeBSD 7.0 on HP DL 380. This is a mptable result. # mptable Processors: APIC ID Version State Family Model Step Flags 0 0x14BSP, usable 6 2 1 0x0381 6 0x14AP, usable 15 2 9 0xbfebfbff 2 way cpus are same as 3.0GHz Xeon CPU. But they have different Family, Step, and Flags. SMP does NOT work with cpus with different steppings. You should find other matching pair for smp to work. Then this needs to be FIXED because MANY OEMs ship mixed stepping processors as Intel now supports it -aps -- What lies behind us and what lies in front of us is of little concern to what lies within us. -Ralph Waldo Emerson ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]