my FreeBSD-4.8-Stable custom kernel crashes in USB code during boot. It does not matter if any USB device is connected. I checked all combinations of no, one, or two devices connected out of my collection (USB memory stick, Sony clie handheld). The crash is reproducible at the same location in the USB driver.
A generic kernel does not crash, but does not detect the Clie.
Enclosed are a DDB stack trace (stacktrace.txt), my machine-specific config file (KISTE), as well as dmesg output from the generic kernel (dmesg.boot.txt).
Any hints?
Thanks in advance -Christoph Sold
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd4ff irq 5 at device 4.2 on pci usb0: <VIA 87C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: UIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered
Fatal trap 12: page fault while in kernel mode
fault virtual address : 0x4
fault code : supervisor read, page not present
instruction pointer : 0x8:0xc02df5ac
stack pointer : 0x10:0xc052ad20
frame pointer : 0x10:0xc052ad3c
code segment : base 0x0, limit 0xfffff, type 0x1b
: DPL 0, pres 1, def32 1, gran 1
processor eflags : interrupt enabled, resume, IOPL : 0
current process : 0 (swapper)
interrupt mask : none
trap number : 12
panic: page fault
Uptime: 0s
Automatic reboot in 15 seconds - press a key on the console to abort
Debugger("manual escape to debugger")
Stopped at Debugger+0x35: movb $0, in_Debugger.429
db> trace
Debugger(c03ea269) at Debugger+0x35
scgetc(c046db20,3,c0466540,1,7e) at scgetc+0x47a
sccngetch(2,c052abfc,c01c547e,c94520e0,c052ac0c) at sccngetch+0x10a
sccncheckc(c04520e0,c052ac0c,c01a8124,186a0,c0e35e20) at sccncheckc+0xa
cncheckc(186a06) at cncheckc+0x2e
shutdown_panic(0,100) at shutdown_panic+0x34
boot(100,10,c052ace0,c052ac74,c0373ab4) at boot+0x335
panic(c03f0d4c,c03f081f,c046e340,c0451b40,0) at panic+0x7d
trap_fatal(c052ace0,4,c046e340,c,0) at trap_fatal+0x344
trap_pfault(c052ace0,0,4,0,c154d000) at trap_pfault+0x12d
trap(c0520010,c0380010,8e4c0010,c15de400,c15cd000) at trap+0x40f
calltrap() at calltrap+0x11
--- trap 0xc, eip = 0xc02df5ac, esp = 0xc052ad20, ebp = 0xc052ad3c ---
uhci_idone(0,c15d4e00,c15cd000,c15d4e00,c052ad6c) at uhci_idons+0xc
uhci_waitintr(c15cd000,c15d4e00,c15d4e00,8,c052ad7c) at uhci_waitintr+0x62
uhci_device_ctrl_start(c15d4e00,0,c15d4e00,c052ae0c,c02e30be) at
uhci_device_ctrl_transfer(c15d4e00,c15d4e00,c052ae0c,c02e30be) at
uhci_device_ctrl_transfer+0x1f
usbd_transfer(c15d4e00,c052add4,c02e30c7,c15d4e00,c15d4db0) at usbd_transfer+0xa3
usb_sync_transfer(c15d4e00,c15d4db0,c15d4d80,c15d4db0,c15bc780) at
usb_sync_transfer+0x10
usbd_do_reqest_flags(c15d4d80,c052ac0c,c15d4db0,c15d4d80,0) at
usb_do_reqest_flags+0x67
usb_do_reqest(c15d4d80,c052ae0c,c15d4db0,c15d0d80,0) at usb_do_reqest+0x18
usb_get_desc(c15d4d80,1,0,8,c15d4db0) at usb_get_desc+0
x6a
usbd_new_device(c15d4f80,c15cd000,1,0,1,c15d4f30) at usbd_new_device+0x154
uhub_explore(015cc100,c15cc180,c15ccb80,0,c52aea0) at uhub_explore+0x203
usb_attach(c15cc180,c052aebc,c01b0f77,c15cc180,c15cd000) at usb_attach+0x106
DEVICE_ATTACH(c15ca080,c15ca080,c15ca300,0,1) at DEVICE_ATTACH+0x32
device_probe_and_attach(c15ca300) at device_probe_and_attach+0x67
uhci_pci_attach(c15ccb80,c052af08,c01b0f77,c15ccb80,c15ccb80) at uhci_pci_attach+0x2a4
DEVICE_ATTACH(c15ccb80,c15ccb80,c15ca180,0,0) at DEVICE_ATTACH+0x32
device_probe_and_attach(c15ccb80) at device_probe_and_attach+0x67
bus_generic_attach(c15ca080,c052af40,c01b0f77,c15ca080,c15ca080) at
bus_generic_attach+0x16
DEVICE_ATTACH(c15ca080,c15ca080,c15ca300,0,1) at DEVICE_ATTACH+0x32
device_probe_and_attach(c15ca080) at device_probe_and_attach+0x67
bus_generic_attach(c15ca180,c052af078,c01b0f77,c15ca180,c15ca180) at
bus_generic_attach+0x16
DEVICE_ATTACH(c15ca180,c15ca180,c0e48780,0,1) at DEVICE_ATTACH+0x32
device_probe_and_attach(c15ca180) at device_probe_and_attach+0x67
bus_generic_attach(c15ca300,c15ca300,c052afa4,c012e0c2,c15ca300) at
bus_generic_attach+0x16
nexus_attach(c15ca300,c052afc0,c01b0f77,c15ca300,c15ca300) at nexus_attach+0xd
DEVICE_ATTACH(c15ca300,c15ca300,c041da10,52f000,1) at DEVICE_ATTACH+0x32
device_probe_and_attach(c15ca300) at device_probe_and_attach+0x67
root_bus_configure(c0e48780,c03eb5ec,0) at root_bus_configure+0x16
configure(0,572c00,52f000,0,c012daa0) at configure+0x33
begin() at begin+0x47
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RC #3: Mon Mar 31 21:42:11 CEST 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (997.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268419072 (262128K bytes)
avail memory = 255614976 (249624K bytes)
Preloaded elf kernel "kernel.GENERIC" at 0xc056e000.
Preloaded elf module "vesa.ko" at 0xc056e0a4.
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc056b782 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00f0eb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xfc000000-0xfdffffff at device
0.0 on pci0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia GeForce2 GTS graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: Lexmark Lexmark Z42, rev 1.00/1.00, addr 2, iclass 7/1
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass0: USB Disk, rev 1.10/1.00, addr 2
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4
pci0: <unknown card> (vendor=0x1274, dev=0x5880) at 5.0 irq 9
dc0: <Intel 21143 10/100BaseTX> port 0xb400-0xb47f mem 0xed800000-0xed8003ff irq 5 at
device 10.0 on pci0
dc0: Ethernet address: 00:40:f4:0a:be:55
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <810a> port 0xb000-0xb0ff mem 0xed000000-0xed0000ff irq 10 at device 11.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xcb7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5L/0101.02> HP ENHANCED PCL5,PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 38166MB <ST340823A> [77545/16/63] at ata0-master UDMA66
acd0: DVD-ROM <LITEON DVD-ROM LTD122> at ata0-slave UDMA33
acd1: CD-RW <SONY CD-RW CRX140E> at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: < USB DISK 2.08> Removable Direct Access SCSI-0 device
da0: 650KB/s transfers
da0: 62MB (128000 512 byte sectors: 64H 32S/T 62C)
IP packet filtering initialized, divert disabled, rule-based forwarding enabled,
default to deny, logging disabled
cd9660: Joliet Extension (Level 3)
# # KISTE -- Host-specific kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # machine i386 cpu I686_CPU # CPU_ENABLE_SSE enables SSE/MMX2 instructions support. # CPU_FASTER_5X86_FPU enables faster FPU exception handler. options CPU_ENABLE_SSE options CPU_FASTER_5X86_FPU ident KISTE maxusers 0 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options FAST_IPSEC #new IPsec # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV # options. # NETSMBCRYPTO enables support for encrypted passwords. options NETSMB #SMB/CIFS requester options NETSMBCRYPTO #encrypted password support for SMB # mchain library. It can be either loaded as KLD or compiled into kernel options LIBMCHAIN #mbuf management library # netgraph(4). Enable the base netgraph code with the NETGRAPH option. # Individual node types can be enabled with the corresponding option # listed below; however, this is not strictly necessary as netgraph # will automatically load the corresponding KLD module if the node type # is not already compiled into the kernel. Each type below has a # corresponding man page, e.g., ng_async(8). options NETGRAPH #netgraph(4) system options NETGRAPH_ASYNC options NETGRAPH_BPF options NETGRAPH_CISCO options NETGRAPH_ECHO options NETGRAPH_ETHER options NETGRAPH_FRAME_RELAY options NETGRAPH_HOLE options NETGRAPH_IFACE options NETGRAPH_KSOCKET options NETGRAPH_L2TP options NETGRAPH_LMI # MPPC compression requires proprietary files (not included) #options NETGRAPH_MPPC_COMPRESSION options NETGRAPH_MPPC_ENCRYPTION options NETGRAPH_ONE2MANY options NETGRAPH_PPP options NETGRAPH_PPPOE options NETGRAPH_PPTPGRE options NETGRAPH_RFC1490 options NETGRAPH_SOCKET options NETGRAPH_TEE options NETGRAPH_TTY options NETGRAPH_UI options NETGRAPH_VJC options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem options SMBFS #SMB/CIFS filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=2000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. device isa device pci options PCI_QUIET #quiets PCI code on chipset settings device agp # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # This option allow you to override the default probe time for IDE # devices, to get a faster probe. Setting this below 10000 violate # the IDE specs, but may still work for you (it will work for most # people). # options IDE_DELAY=8000 # Be optimistic about Joe IDE device # SCSI Controllers device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa? device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # The following option probably won't work with the LCD displays. options VGA_WIDTH90 # support 90 column modes # To include support for VESA video modes options VESA # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 options MAXCONS=12 #cps Number of virtual consoles options SC_DFLT_FONT #cps Compile font in makeoptions SC_DFLT_FONT=iso15 options SC_DISABLE_REBOOT #cps Disable Ctrl-Alt-Del options SC_HISTORY_SIZE=400 #cps A bigger scrollback history options SC_PIXEL_MODE #cps Add support for raster text mode options SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)" options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)" device agp # support several AGP chipsets # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #cps device sio2 at isa? disable port IO_COM3 irq 5 #cps device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. device an # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device vlan 1 #VLAN support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpf) pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) pseudo-device tun #Tunnel driver (ppp(8), nos-tun(8)) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player # This allows you to actually store this configuration file into # the kernel binary itself, where it may be later read by saying: # strings -n 3 /kernel | sed -n 's/^___//p' > MYKERNEL # options INCLUDE_CONFIG_FILE # Include this file in kernel # Allow applications running in user space to control the Local Descriptor # Table (LDT). This is required by some ports. Future versions of FreeBSD # may require this option for some programs in the base system. # options USER_LDT #allow user-level control of i386 ldt # Enable the kernel debugger. # Don't drop into DDB for a panic. Intended for unattended operation # where you may want to drop to DDB from the console, but still want # the machine to recover from a panic options DDB options DDB_UNATTENDED # KTRACE enables the system-call tracing facility ktrace(2). # options KTRACE #kernel tracing # IPFIREWALL enables support for IP firewall construction, in # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT # limits the number of times a matching entry can be logged. # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any" # and if you do not add other rules during startup to allow access, # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open # in /etc/rc.conf when first enabling this feature, then refining the # firewall rules in /etc/rc.firewall after you've tested that the new kernel # feature works properly. # IPDIVERT enables the divert IP sockets, used by ``ipfw divert'' options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_FORWARD #enable transparent proxy support options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPDIVERT #divert sockets # RANDOM_IP_ID causes the ID field in IP packets to be randomized # instead of incremented by 1 with each packet generated. This # option closes a minor information leak which allows remote # observers to determine the rate of packet generation on the # machine by watching the counter. options RANDOM_IP_ID # TCP_DROP_SYNFIN adds support for ignoring TCP packets with SYN+FIN. This # prevents nmap et al. from identifying the TCP/IP stack, but breaks support # for RFC1644 extensions and is not recommended for web servers. # options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN # ICMP_BANDLIM enables icmp error response bandwidth limiting. You # typically want this option as it will help protect the machine from # D.O.S. packet attacks. # options ICMP_BANDLIM # DUMMYNET enables the "dummynet" bandwidth limiter. You need # IPFIREWALL as well. See the dummynet(4) and ipfw(8) manpages for more info. # When you run DUMMYNET it is advisable to also have "options HZ=1000" # to achieve a smoother scheduling of the traffic. # # BRIDGE enables bridging between ethernet cards -- see bridge(4). # You can use IPFIREWALL and DUMMYNET together with bridging. # options DUMMYNET pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device snp #Snoop device - to look at pty/vty/etc.. # Kernel side iconv library options LIBICONV # For PnP/PCI sound cards device pcm # Supported devices: # smb standard io through /dev/smb* # # Supported SMB interfaces: # iicsmb I2C to SMB bridge with any iicbus interface # bktr brooktree848 I2C hardware interface # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA) # viapm VIA VT82C586B,596,686A and VT8233 SMBus controllers # amdpm AMD 756 Power Management Unit # device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device viapm device amdpm device smb # I2C Bus # # Philips i2c bus support is provided by the `iicbus' device. # # Supported devices: # ic i2c network interface # iic i2c standard io # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. # # Supported interfaces: # pcf Philips PCF8584 ISA-bus controller # bktr brooktree848 I2C software interface # # Other: # iicbb generic I2C bit-banging code (needed by lpbb, bktr) # device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge device pcf0 at isa? port 0x320 irq 5 # crypto subsystem # # This is a port of the openbsd crypto framework. Include this when # configuring IPsec and when you have a h/w crypto device to accelerate # user applications that link to openssl. # # Drivers are ports from openbsd with some simple enhancements that have # been fed back to openbsd (and hopefully will be included). pseudo-device crypto # core crypto support pseudo-device cryptodev # /dev/crypto for access to h/w device hifn # Hifn 7951, 7781, etc. device ubsec # Broadcom 5501, 5601, 58xx options COMPAT_LINUX options PNPBIOS
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
