Re: Call for Area SATA II RAID controller testers [Fwd: svn commit: r215234 - head/sys/dev/arcmsr]
On 11/19/2010 20:15, Mike Tancsa wrote: On 11/13/2010 4:03 AM, Xin LI wrote: Hi, I have just committed a new vendor release of arcmsr(4) driver. This is intended for 8.2-RELEASE so please test if you could. Hi, All seems to work well with the ARC-1110 card in RAID 10. Read and write speeds are about the same with the previous version of the driver on AMD64, RELENG_8. It also gets rid of a long standing bootup (cosmetic ?) error. Web and CLI work properly as well # areca-cli hw info The Hardware Monitor Information === Fan#1 Speed (RPM) : 2079 Battery Status : Not Installed HDD #1 Temp. : 40 HDD #2 Temp. : 39 HDD #3 Temp. : 38 HDD #4 Temp. : 38 === GuiErrMsg0x00: Success. . Hi, same here with an Areca 1680, using 20 disk in a Raid60. CLI sys info The System Information === Main Processor : 1200MHz CPU ICache Size: 32KB CPU DCache Size: 32KB CPU SCache Size: 512KB System Memory : 512MB/533MHz/ECC Firmware Version : V1.48 2010-07-08 BOOT ROM Version : V1.47 2009-06-25 Serial Number : Y931CABWAR800375 Controller Name: ARC-1680 Current IP Address : 192.168.5.203 === GuiErrMsg0x00: Success. dmesg: arcmsr0: Areca SAS 3G Host Adapter RAID Controller (RAID6 capable) mem 0xfbdfe000-0xfbdf irq 16 at device 0.0 on pci8 ARECA RAID ADAPTER0: Driver Version 1.20.00.19 2010-11-11 ARECA RAID ADAPTER0: FIRMWARE VERSION V1.48 2010-07-08 arcmsr0: [ITHREAD] Thank you for support Areca, we using it in 5 powerful boxes! Jan Winter ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
Re: Call for Area SATA II RAID controller testers [Fwd: svn commit: r215234 - head/sys/dev/arcmsr]
On 11/13/2010 4:03 AM, Xin LI wrote: Hi, I have just committed a new vendor release of arcmsr(4) driver. This is intended for 8.2-RELEASE so please test if you could. Hi, All seems to work well with the ARC-1110 card in RAID 10. Read and write speeds are about the same with the previous version of the driver on AMD64, RELENG_8. It also gets rid of a long standing bootup (cosmetic ?) error. Web and CLI work properly as well # areca-cli hw info The Hardware Monitor Information === Fan#1 Speed (RPM) : 2079 Battery Status : Not Installed HDD #1 Temp. : 40 HDD #2 Temp. : 39 HDD #3 Temp. : 38 HDD #4 Temp. : 38 === GuiErrMsg0x00: Success. # areca-cli sys info The System Information === Main Processor : 500MHz CPU ICache Size: 32KB CPU DCache Size: 32KB CPU SCache Size: 0KB System Memory : 128MB/333MHz/ECC Firmware Version : V1.48 2009-12-31 BOOT ROM Version : V1.48 2009-12-31 Serial Number : Y523CR000426 Controller Name: ARC-1110 === GuiErrMsg0x00: Success. --- /tmp/dmesg.boot 2010-11-19 14:24:11.0 -0500 +++ dmesg.boot 2010-11-19 15:01:16.0 -0500 @@ -2,7 +2,7 @@ Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. -FreeBSD 8.1-STABLE #0: Fri Nov 19 13:17:53 EST 2010 +FreeBSD 8.1-STABLE #1: Fri Nov 19 14:56:35 EST 2010 mdtan...@obsidian2.sentex.ca:/usr/obj/usr/src/sys/server amd64 Timecounter i8254 frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5800+ (2992.53-MHz K8-class CPU) @@ -44,7 +44,7 @@ pci3: PCI bus on pcib3 arcmsr0: Areca SATA Host Adapter RAID Controller mem 0xff2ff000-0xff2f,0xf640-0xf67f irq 18 at device 14.0 on pci3 -ARECA RAID ADAPTER0: Driver Version 1.20.00.17 2010-07-15 +ARECA RAID ADAPTER0: Driver Version 1.20.00.19 2010-11-11 ARECA RAID ADAPTER0: FIRMWARE VERSION V1.48 2009-12-31 arcmsr0: [ITHREAD] atapci0: ServerWorks HT1000 SATA150 controller port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb81f mem 0xff3fe000-0xff3f irq 11 at device 14.0 on pci1 @@ -119,7 +119,6 @@ uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 4 ports with 4 removable, self powered -(probe16:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step da0 at arcmsr0 bus 0 scbus0 target 0 lun 0 da0: Areca FBSD R001 Fixed Direct Access SCSI-5 device da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) ---Mike ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
Re: Call for Area SATA II RAID controller testers [Fwd: svn commit: r215234 - head/sys/dev/arcmsr]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi, Mike, On 11/19/10 12:15, Mike Tancsa wrote: Hi, All seems to work well with the ARC-1110 card in RAID 10. Read and write speeds are about the same with the previous version of the driver on AMD64, RELENG_8. It also gets rid of a long standing bootup (cosmetic ?) error. Web and CLI work properly as well Thanks! Cheers, - -- Xin LI delp...@delphij.nethttp://www.delphij.net/ FreeBSD - The Power to Serve! Live free or die -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.16 (FreeBSD) iQEcBAEBCAAGBQJM5t3xAAoJEATO+BI/yjfBos0H/itrG+M8j3aE5KqTrFcaaJ0w q0aBQQYv2ya3Y6wMt/MxHC7h3wkm61U6owoGHRAVCEUZXPBGRWUC3R4Gastae7R4 zcMc5K6aHeBM17qZQh0kds5nlSO6x0+hc1H3KpCCE2XJhHaRz8xPFlzFVkB3U5Fi 8uSXKq+KwJDar+7LloyFQqtf7Q22KaxmNoSI9bSwLK9OM02Si7hqk3W52pFxZGJJ P1duhT5S45fg+/6gqCg3uzw8M1UpGLHqN92okXHhAvUZdK/g3dixDrwfavxiRCvb ZTUfqeX58Pmgheh/+7I6XCpD1QTB2hgdiP64/Cqd4aHM5bsKdOkRD/XM+9RD72Y= =/7CP -END PGP SIGNATURE- ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
Call for Area SATA II RAID controller testers [Fwd: svn commit: r215234 - head/sys/dev/arcmsr]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi, I have just committed a new vendor release of arcmsr(4) driver. This is intended for 8.2-RELEASE so please test if you could. Thanks in advance! (Note: I have a tarball at http://people.freebsd.org/~delphij/misc/arcmsr.tar.xz which can be used for 8.x system, untar over /usr/src and rebuild the kernel or module depending on your configuration). - Original Message Subject: svn commit: r215234 - head/sys/dev/arcmsr Date: Sat, 13 Nov 2010 08:58:36 + (UTC) From: Xin LI delp...@freebsd.org To: src-committ...@freebsd.org, svn-src-...@freebsd.org, svn-src-h...@freebsd.org Author: delphij Date: Sat Nov 13 08:58:36 2010 New Revision: 215234 URL: http://svn.freebsd.org/changeset/base/215234 Log: Update to vendor release 1.20.00.19. Bug fixes: * Fixed inquiry data fails comparion at DV1 step * Fixed bad range input in bus_alloc_resource for ADAPTER_TYPE_B * Fixed arcmsr driver prevent arcsas support for Areca SAS HBA ARC13x0 Many thanks to Areca for continuing to support FreeBSD. This commit is intended for MFC before 8.2-RELEASE. Submitted by: Ching-Lung Huang ching2048 areca com tw -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.16 (FreeBSD) iQEcBAEBCAAGBQJM3lRTAAoJEATO+BI/yjfBs3wH/24ViOUPwdDjr9lDsX6RaWCQ Ux+9YsekrXLVks61zH8B1dW1rXmthk+aiXpE223UYkcb2M5sLgOQCBYlSDoSwJXu q8iLLZ9Dg6hWpLiS1u6sCj3jjsQbsDVuW1BCrCTSr/eOp6AbXI19GEDouPxVKkt3 wc1amh3eo6ZQAWnxksk+6/HK4nGJOQhjuEC8llybSsImeqqzoEGhRyqJVGa3NO7q fZfTX108QItRmx9Uavh3/2Sa4WA9RWWky+QUSg3hPZg1kNSYJOHuCHgEQIGEE+9R qG38IjHP+NPw0jZVAE7Qap0rA/iMY5FOKeLTjH0PvRBsFeRiPP22KRvdf8eQBM8= =X4q7 -END PGP SIGNATURE- ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org