Re: RELENG_6 has problems with booting
I still experience hangs with RELENG_6. Today I though I give it another try. I used a fresh cvsup of RELENG_6. After rm -rf /usr/obj* make clean make cleandir make buildworld make buildkernel make install kernel I rebooted into single user mode in order to install the world and execute mergemaster. Even in single user mode the machine will hang after some minutes. I have no problems with RELENG_5. See my other mails in this thread for a verbose dmesg. Any hints on that? Greets, Jonathan -- Jonathan Weiss http://blog.innerewut.de ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: RELENG_6 has problems with booting
Le Lundi 18 Juillet 2005 10:50, Jonathan Weiss a écrit : Hi, When I do a boot in safe mode, everything is ok. Attachted is the dmesg from the verbose boot. Did you try without acpi ? I've got a similar problem with a nforce2 based mother board. Regards. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
RELENG_6 has problems with booting
Cheers, Yesterday I updated my 5-STABLE system to RELENG_6 through cvsupmake. My machine will only boot in safe mode. Verbose or normal boot will result in a hang that occuers normally during local package startup or filesystem scan. I get no panic or LOR, the machine just completely hangs. I used the GENERIC kernel with these points added: --- # PF device pf device pflog device pfsync # ALTQ options ALTQ options ALTQ_CBQ# Class Bases Queueing options ALTQ_RED# Random Early Drop options ALTQ_RIO# RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required for SMP build options ALTQ_DEBUG # Sound devicesound device snd_via82c686 #atapicam deviceatapicam # GBDE options GEOM_BDE options COMPAT_FREEBSD5 --- I also tried a kernel with `options SMP` commented out but it still hangs. The dmesg: --- Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA1 #2: Sat Jul 16 23:22:20 CEST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/XXX WARNING: WITNESS option enabled, expect reduced performance. Timecounter i8254 frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 2500+ (1830.01-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x6a0 Stepping = 0 Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,MMX,FXSR,SSE AMD Features=0xc0400800SYSCALL,MMX+,3DNow+,3DNow real memory = 536805376 (511 MB) avail memory = 515989504 (492 MB) npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: Host to PCI bridge pcibus 0 on motherboard pir0: PCI Interrupt Routing Table: 11 Entries on motherboard pci0: PCI bus on pcib0 $PIR: No matching entry for 0.1.INTA $PIR: No matching entry for 0.2.INTA $PIR: No matching entry for 0.2.INTB $PIR: No matching entry for 0.2.INTC $PIR: No matching entry for 0.4.INTA $PIR: No matching entry for 0.6.INTA agp0: NVIDIA nForce2 AGP Controller mem 0xd800-0xdbff at device 0.0 on pci0 pci0: memory, RAM at device 0.1 (no driver attached) pci0: memory, RAM at device 0.2 (no driver attached) pci0: memory, RAM at device 0.3 (no driver attached) pci0: memory, RAM at device 0.4 (no driver attached) pci0: memory, RAM at device 0.5 (no driver attached) isab0: PCI-ISA bridge at device 1.0 on pci0 isa0: ISA bus on isab0 pci0: serial bus, SMBus at device 1.1 (no driver attached) ohci0: OHCI (generic) USB controller mem 0xe0003000-0xe0003fff irq 12 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: OHCI (generic) USB controller on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: OHCI (generic) USB controller mem 0xe0004000-0xe0004fff irq 11 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: OHCI (generic) USB controller on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: EHCI (generic) USB 2.0 controller mem 0xe0005000-0xe00050ff irq 5 at device 2.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: EHCI (generic) USB 2.0 controller on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered ulpt0: Brother HL-5040, rev 2.00/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode nve0: NVIDIA nForce MCP2 Networking Adapter port 0xd000-0xd007 mem 0xe000-0xefff irq 11 at device 4.0 on pci0 nve0: Ethernet address 00:0c:6e:57:5a:25 miibus0: MII bus on nve0 rlphy0: RTL8201L 10/100 media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nve0: Ethernet address: 00:0c:6e:57:5a:25 nve0: [GIANT-LOCKED] pci0: multimedia, audio at device 6.0 (no driver attached) pcib1: PCIBIOS PCI-PCI bridge at device 8.0 on pci0 pci1: PCI bus on pcib1 ed0: NE2000 PCI Ethernet (RealTek 8029) port 0xc000-0xc01f irq 5 at device 8.0 on pci1 ed0: [GIANT-LOCKED] ed0: Ethernet address: 00:a0:d2:14:f5:33 ed0: if_start running deferred for Giant ed0: type NE2000 (16 bit) dc0: Davicom DM9102A 10/100BaseTX port 0xc400-0xc4ff mem 0xdf00-0xdfff irq 12 at device 10.0 on pci1 miibus1: MII bus on dc0 ukphy0: Generic IEEE 802.3u media interface on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
Re: RELENG_6 has problems with booting
On 7/17/2005 22:15, Jonathan Weiss wrote: Cheers, Yesterday I updated my 5-STABLE system to RELENG_6 through cvsupmake. My machine will only boot in safe mode. Verbose or normal boot will result in a hang that occuers normally during local package startup or filesystem scan. I get no panic or LOR, the machine just completely hangs. I used the GENERIC kernel with these points added: --- # PF device pf device pflog device pfsync # ALTQ options ALTQ options ALTQ_CBQ# Class Bases Queueing options ALTQ_RED# Random Early Drop options ALTQ_RIO# RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required for SMP build options ALTQ_DEBUG # Sound devicesound device snd_via82c686 #atapicam deviceatapicam # GBDE options GEOM_BDE options COMPAT_FREEBSD5 --- I also tried a kernel with `options SMP` commented out but it still hangs. The dmesg: --- Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA1 #2: Sat Jul 16 23:22:20 CEST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/XXX WARNING: WITNESS option enabled, expect reduced performance. Timecounter i8254 frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 2500+ (1830.01-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x6a0 Stepping = 0 Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,MMX,FXSR,SSE AMD Features=0xc0400800SYSCALL,MMX+,3DNow+,3DNow real memory = 536805376 (511 MB) avail memory = 515989504 (492 MB) npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: Host to PCI bridge pcibus 0 on motherboard pir0: PCI Interrupt Routing Table: 11 Entries on motherboard pci0: PCI bus on pcib0 $PIR: No matching entry for 0.1.INTA $PIR: No matching entry for 0.2.INTA $PIR: No matching entry for 0.2.INTB $PIR: No matching entry for 0.2.INTC $PIR: No matching entry for 0.4.INTA $PIR: No matching entry for 0.6.INTA agp0: NVIDIA nForce2 AGP Controller mem 0xd800-0xdbff at device 0.0 on pci0 pci0: memory, RAM at device 0.1 (no driver attached) pci0: memory, RAM at device 0.2 (no driver attached) pci0: memory, RAM at device 0.3 (no driver attached) pci0: memory, RAM at device 0.4 (no driver attached) pci0: memory, RAM at device 0.5 (no driver attached) isab0: PCI-ISA bridge at device 1.0 on pci0 isa0: ISA bus on isab0 pci0: serial bus, SMBus at device 1.1 (no driver attached) ohci0: OHCI (generic) USB controller mem 0xe0003000-0xe0003fff irq 12 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: OHCI (generic) USB controller on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: OHCI (generic) USB controller mem 0xe0004000-0xe0004fff irq 11 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: OHCI (generic) USB controller on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: EHCI (generic) USB 2.0 controller mem 0xe0005000-0xe00050ff irq 5 at device 2.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: EHCI (generic) USB 2.0 controller on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered ulpt0: Brother HL-5040, rev 2.00/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode nve0: NVIDIA nForce MCP2 Networking Adapter port 0xd000-0xd007 mem 0xe000-0xefff irq 11 at device 4.0 on pci0 nve0: Ethernet address 00:0c:6e:57:5a:25 miibus0: MII bus on nve0 rlphy0: RTL8201L 10/100 media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nve0: Ethernet address: 00:0c:6e:57:5a:25 nve0: [GIANT-LOCKED] pci0: multimedia, audio at device 6.0 (no driver attached) pcib1: PCIBIOS PCI-PCI bridge at device 8.0 on pci0 pci1: PCI bus on pcib1 ed0: NE2000 PCI Ethernet (RealTek 8029) port 0xc000-0xc01f irq 5 at device 8.0 on pci1 ed0: [GIANT-LOCKED] ed0: Ethernet address: 00:a0:d2:14:f5:33 ed0: if_start running deferred for Giant ed0: type NE2000 (16 bit) dc0: Davicom DM9102A 10/100BaseTX port 0xc400-0xc4ff mem 0xdf00-0xdfff irq 12 at device 10.0 on pci1 miibus1: MII bus on dc0 ukphy0: Generic IEEE 802.3u media interface on miibus1 ukphy0: 10baseT,
