Re: Install freeze while or immediately after finish copying the ports-collection
* On 11/12/2005 9:55 PM Roland Smith wrote: Have you verified the checksum of the ISO image after you downloaded it? What happens if you don't install ports? (you can always do it later). Yep. Checksums are ok. If i just install a minimal system as Brandon suggested, the installation process works properly (except that disk geometry allegedly wrong, but the system-guessed values are correct for LBA mode). How do you know that the network card doesn't work? If you go to the emergency shell (alt-F4, IIRC) and type 'ifconfig', does it show a network interface with 'media: Ethernet'? Yes. The card is detected and also configured while the install process, but every try to connect to a ftp server fails. Sadly, another problem occured after rebooting. The slave harddisk had debian on it before the installation of BSD with grub written into the MBR. The problem is, i seems that bsd writes its own bootloader into th MBR of the slave harddisk. So grub is still in the master's MBR but the config files are of course not addressable. So is it possible to instruct the sysinstall to write its bootloader to the mbr of the master harddisk and detect and conigure winxp for dual boot? Thanks Timm ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Install freeze while or immediately after finish copying the ports-collection
On Sun, Nov 13, 2005 at 05:22:34PM +0100, Timm Florian Gloger wrote: If i just install a minimal system as Brandon suggested, the installation process works properly (except that disk geometry allegedly wrong, but the system-guessed values are correct for LBA mode). Well, that's something. How do you know that the network card doesn't work? If you go to the emergency shell (alt-F4, IIRC) and type 'ifconfig', does it show a network interface with 'media: Ethernet'? Yes. The card is detected and also configured while the install process, but every try to connect to a ftp server fails. Do you have a router and/or firewall? If so, is it configured correctly to let ftp from this machine through? snip So is it possible to instruct the sysinstall to write its bootloader to the mbr of the master harddisk and detect and conigure winxp for dual boot? I think this is covered in the Handbook. Roland -- R.F.Smith (http://www.xs4all.nl/~rsmith/) Please send e-mail as plain text. public key: http://www.xs4all.nl/~rsmith/pubkey.txt pgpB9tYcLov75.pgp Description: PGP signature
Re: Install freeze while or immediately after finish copying the ports-collection
Thanks for all your help. After installing the bootloader correctly, 6.0 boots well and fast. Also network is runnig now. Seems sysinstall did not bring it up after configuring, so i didi this manualy on the holo shell. I noticed a mistake i made during the diagnostic of the freezes. They may not be just the result of the atapi devices. After booting for a several times now i got 2 more freezes in not coherent periods of time after logging in. i am able to access the fs through the other os so i checked the message and other logfiles, but i cannot find any panic or other bad logentries. Any ideas/ suggestions? (Will post this as a new thread) Thanks a lot again Timm ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Install freeze while or immediately after finish copying the ports-collection
Timm, We had a similar problem during our install - the fix was to only install the bare minimum to get the system running 6.0, then install everything else after rebooting and re-running sysinstall. Thanks, Brandon Timm Florian Gloger wrote: Hi list, I am sorry to request help again, but now (after getting the system boot with the install cd [see other messages]) the install process freezes while or immediately after the copying the ports collection to my harddisk. First i thought i could be my usb keyboard (thought i read something like that somewhere else) but even with ps/2 devices the freeze occures. Using an extern ftp server for installation is not possible since my inboard 3com network interface seems to be not supported correctly. Any ideas? Thanks Timm ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED] . ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Install freeze while or immediately after finish copying the ports-collection
On Sat, Nov 12, 2005 at 09:36:24PM +0100, Timm Florian Gloger wrote: Hi list, I am sorry to request help again, but now (after getting the system boot with the install cd [see other messages]) the install process freezes while or immediately after the copying the ports collection to my harddisk. Have you verified the checksum of the ISO image after you downloaded it? What happens if you don't install ports? (you can always do it later). First i thought i could be my usb keyboard (thought i read something like that somewhere else) but even with ps/2 devices the freeze occures. Using an extern ftp server for installation is not possible since my inboard 3com network interface seems to be not supported correctly. Any ideas? How do you know that the network card doesn't work? If you go to the emergency shell (alt-F4, IIRC) and type 'ifconfig', does it show a network interface with 'media: Ethernet'? Anyway, ftp install uses the same install program. So unless you have a suspicion that it's the CD or the atapicd driver that causes the hang instead of sysinstall, I don't think ftp install will make a difference. Roland -- R.F.Smith (http://www.xs4all.nl/~rsmith/) Please send e-mail as plain text. public key: http://www.xs4all.nl/~rsmith/pubkey.txt pgpKoB0r9wWS1.pgp Description: PGP signature
