Re: ciss0: ADAPTER HEARTBEAT FAILED? on a new bought HP dl360g3 | DMESG attached
Dennis Berger wrote: Hey list, after a few hours of uptime I get an highlighted kernelmessage. ciss0: ADAPTER HEARTBEAT FAILED yes this are capital chars. I wonder if this can be a driver problem or if it definitly a hardware failure. Server is a fresh HP DL360g3 sorry i can't attach a dmesg cause the machine don't boot anymore. stuck during bootloader with IO/ error. regards, Dennis ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED] Table 'FACP' at 0xbfff3340 Table 'SPCR' at 0xbfff3140 Table 'MCFG' at 0xbfff31c0 Table 'APIC' at 0xbfff3200 MADT: Found table at 0xbfff3200 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled MADT: Found CPU APIC ID 4 ACPI ID 4: disabled MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 6 ACPI ID 6: disabled MADT: Found CPU APIC ID 1 ACPI ID 1: disabled MADT: Found CPU APIC ID 5 ACPI ID 5: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: disabled MADT: Found CPU APIC ID 7 ACPI ID 7: disabled ACPI APIC Table: HP 0083 Calibrating clock(s) ... i8254 clock: 1193220 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter i8254 frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3200130128 Hz CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.13-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf43 Stepping = 3 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x641dSSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,b14 AMD Features=0x2000LM Logical CPUs per core: 2 real memory = 3221172224 (3071 MB) Physical memory chunk(s): 0x1000 - 0x0009efff, 647168 bytes (158 pages) 0x0010 - 0x003f, 3145728 bytes (768 pages) 0x00c25000 - 0xbc9bafff, 3151585280 bytes (769430 pages) avail memory = 3151409152 (3005 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffee0 bios32: Entry = 0xf (c00f) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf+0x96 pnpbios: Found PnP BIOS data at 0xc00f4f70 pnpbios: Entry = f:ae45 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec0 ioapic0: Routing external 8259A's - intpin 0 ioapic0: intpin 0 - ExtINT (edge, high) ioapic0: intpin 1 - ISA IRQ 1 (edge, high) ioapic0: intpin 2 - ISA IRQ 2 (edge, high) ioapic0: intpin 3 - ISA IRQ 3 (edge, high) ioapic0: intpin 4 - ISA IRQ 4 (edge, high) ioapic0: intpin 5 - ISA IRQ 5 (edge, high) ioapic0: intpin 6 - ISA IRQ 6 (edge, high) ioapic0: intpin 7 - ISA IRQ 7 (edge, high) ioapic0: intpin 8 - ISA IRQ 8 (edge, high) ioapic0: intpin 9 - ISA IRQ 9 (edge, high) ioapic0: intpin 10 - ISA IRQ 10 (edge, high) ioapic0: intpin 11 - ISA IRQ 11 (edge, high) ioapic0: intpin 12 - ISA IRQ 12 (edge, high) ioapic0: intpin 13 - ISA IRQ 13 (edge, high) ioapic0: intpin 14 - ISA IRQ 14 (edge, high) ioapic0: intpin 15 - ISA IRQ 15 (edge, high) ioapic0: intpin 16 - PCI IRQ 16 (level, low) ioapic0: intpin 17 - PCI IRQ 17 (level, low) ioapic0: intpin 18 - PCI IRQ 18 (level, low) ioapic0: intpin 19 - PCI IRQ 19 (level, low) ioapic0: intpin 20 - PCI IRQ 20 (level, low) ioapic0: intpin 21 - PCI IRQ 21 (level, low) ioapic0: intpin 22 - PCI IRQ 22 (level, low) ioapic0: intpin 23 - PCI IRQ 23 (level, low) MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec1 ioapic1: Changing APIC ID to 9 ioapic1: intpin 0 - PCI IRQ 24 (level, low) ioapic1: intpin 1 - PCI IRQ 25 (level, low) ioapic1: intpin 2 - PCI IRQ 26 (level, low) ioapic1: intpin 3 - PCI IRQ 27 (level, low) ioapic1: intpin 4 - PCI IRQ 28 (level, low) ioapic1: intpin 5 - PCI IRQ 29 (level, low) ioapic1: intpin 6 - PCI IRQ 30 (level, low) ioapic1: intpin 7 - PCI IRQ 31 (level, low) ioapic1: intpin 8 - PCI IRQ 32 (level, low) ioapic1: intpin 9 - PCI IRQ 33 (level, low) ioapic1: intpin 10 - PCI IRQ 34 (level, low) ioapic1: intpin 11 - PCI IRQ 35 (level, low) ioapic1: intpin 12 - PCI IRQ 36 (level, low) ioapic1: intpin 13 - PCI IRQ 37 (level, low) ioapic1: intpin 14 - PCI IRQ 38 (level, low) ioapic1: intpin 15 - PCI IRQ 39 (level, low) ioapic1: intpin 16 - PCI IRQ 40 (level, low) ioapic1: intpin 17 - PCI IRQ 41 (level, low) ioapic1: intpin 18 - PCI IRQ 42 (level, low) ioapic1: intpin 19 - PCI IRQ 43 (level, low) ioapic1: intpin 20 - PCI IRQ 44 (level, low) ioapic1: intpin 21 - PCI IRQ 45 (level, low) ioapic1: intpin 22 - PCI IRQ 46 (level, low) ioapic1: intpin 23 - PCI IRQ 47 (level, low) MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec82000 ioapic2: intpin 0 - PCI IRQ 48 (level, low) ioapic2: intpin 1 - PCI IRQ 49 (level, low) ioapic2: intpin 2 - PCI IRQ 50 (level, low) ioapic2: intpin 3 - PCI IRQ 51 (level, low) ioapic2: intpin 4 - PCI IRQ 52 (level, low) ioapic2: intpin 5 - PCI IRQ 53 (level, low) ioapic2: intpin 6 - PCI IRQ
Re: ciss0: ADAPTER HEARTBEAT FAILED? on a new bought HP dl360g3
On Mon, May 29, 2006, Dennis Berger wrote: ciss0: ADAPTER HEARTBEAT FAILED yes this are capital chars. I wonder if this can be a driver problem or if it definitly a hardware failure. We have had similar messages on a DL380 G3 in the past. They were gone as we replaced the system board incl SmartArray controller. Cheers, -cs ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ciss0: ADAPTER HEARTBEAT FAILED? on a new bought HP dl360g3
it looks like '6.1 with qouta' bug back again ... server works normaly for 10-15 minutes, then everything in the kernel working perfectly, user-land programs - hangs up ... cat /var/run/dmesg.boot: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #6: Wed May 31 20:43:31 MSD 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/CUSTOM ACPI APIC Table: PTLTD APIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.15-MHz K8-class CPU) Origin = GenuineIntel Id = 0xf41 Stepping = 1 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x659dSSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,CX16,b14 AMD Features=0x20100800SYSCALL,NX,LM Logical CPUs per core: 2 real memory = 9663676416 (9216 MB) avail memory = 8283570176 (7899 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0 Version 2.0 irqs 0-23 on motherboard ioapic1 Version 2.0 irqs 24-47 on motherboard ioapic2 Version 2.0 irqs 48-71 on motherboard ioapic3 Version 2.0 irqs 72-95 on motherboard ioapic4 Version 2.0 irqs 96-119 on motherboard kbd1 at kbdmux0 ichwd module loaded acpi0: PTLTD RSDT on motherboard acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0 cpu0: ACPI CPU on acpi0 cpu1: ACPI CPU on acpi0 cpu2: ACPI CPU on acpi0 cpu3: ACPI CPU on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pci0: unknown at device 0.1 (no driver attached) pci0: base peripheral at device 1.0 (no driver attached) pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0 pci1: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge at device 0.0 on pci1 pci2: ACPI PCI bus on pcib2 ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port 0x2400-0x24ff,0x2000-0x20ff mem 0xdc20-0xdc201fff irq 32 at device 2.0on pci2 ahd0: [GIANT-LOCKED] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs ahd1: Adaptec AIC7902 Ultra320 SCSI adapter port 0x2c00-0x2cff,0x2800-0x28ff mem 0xdc202000-0xdc203fff irq 33 at device 2.1on pci2 ahd1: [GIANT-LOCKED] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs pci1: base peripheral, interrupt controller at device 0.1 (no driver attached) pcib3: ACPI PCI-PCI bridge at device 0.2 on pci1 pci3: ACPI PCI bus on pcib3 3ware device driver for 9000 series storage controllers, version: 3.60.02.012 twa0: 3ware 9000 series Storage Controller port 0x3000-0x30ff mem 0xdc30-0xdc3000ff,0xde80-0xdeff irq 48 at device 1.0 on pci3 twa0: [FAST] twa0: INFO: (0x15: 0x1300): Controller details:: Model 9500S-12, 12 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047 em0: Intel(R) PRO/1000 Network Connection Version - 3.2.18 port 0x3400-0x343f mem 0xdc32-0xdc33 irq 54 at device 2.0 on pci3 em0: Ethernet address: 00:30:48:74:ad:f0 em1: Intel(R) PRO/1000 Network Connection Version - 3.2.18 port 0x3440-0x347f mem 0xdc34-0xdc35 irq 55 at device 2.1 on pci3 em1: Ethernet address: 00:30:48:74:ad:f1 pci1: base peripheral, interrupt controller at device 0.3 (no driver attached) pcib4: ACPI PCI-PCI bridge irq 16 at device 4.0 on pci0 pci4: ACPI PCI bus on pcib4 pcib5: ACPI PCI-PCI bridge irq 16 at device 6.0 on pci0 pci5: ACPI PCI bus on pcib5 pcib6: ACPI PCI-PCI bridge at device 0.0 on pci5 pci6: ACPI PCI bus on pcib6 pci5: base peripheral, interrupt controller at device 0.1 (no driver attached) pcib7: ACPI PCI-PCI bridge at device 0.2 on pci5 pci7: ACPI PCI bus on pcib7 twa1: 3ware 9000 series Storage Controller port 0x4000-0x40ff mem 0xdc50-0xdc5000ff,0xdf00-0xdf7f irq 96 at device 1.0 on pci7 twa1: [FAST] twa1: INFO: (0x15: 0x1300): Controller details:: Model 9500S-12, 12 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047 pci5: base peripheral, interrupt controller at device 0.3 (no driver attached) uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0x1400-0x141f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: Intel 82801EB (ICH5) USB controller USB-A on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0x1420-0x143f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: Intel 82801EB (ICH5) USB controller USB-B on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: Intel 82801EB (ICH5) USB controller USB-C port 0x1440-0x145f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: Intel 82801EB (ICH5) USB controller USB-C
ciss0: ADAPTER HEARTBEAT FAILED? on a new bought HP dl360g3
Hey list, after a few hours of uptime I get an highlighted kernelmessage. ciss0: ADAPTER HEARTBEAT FAILED yes this are capital chars. I wonder if this can be a driver problem or if it definitly a hardware failure. Server is a fresh HP DL360g3 sorry i can't attach a dmesg cause the machine don't boot anymore. stuck during bootloader with IO/ error. regards, Dennis ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ciss0: ADAPTER HEARTBEAT FAILED? on a new bought HP dl360g3
I forgot to tell that after this kernel message appears the maschine is still pingable, but whatever needs disk access doesn't work including sshd login. Dennis Berger wrote: Hey list, after a few hours of uptime I get an highlighted kernelmessage. ciss0: ADAPTER HEARTBEAT FAILED yes this are capital chars. I wonder if this can be a driver problem or if it definitly a hardware failure. Server is a fresh HP DL360g3 sorry i can't attach a dmesg cause the machine don't boot anymore. stuck during bootloader with IO/ error. regards, Dennis ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
