Re: i915drm
Le Vendredi 30 Décembre 2005 16:05, Gianmarco Giovannelli a écrit : > Is there anyone here that can share it's > xorg.conf to use something of the new accel features of the card. There are only few parameters, see man i810 ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
At 13.16 29/12/2005, you wrote: >Le Jeudi 29 Décembre 2005 07:59, Gianmarco Giovannelli a écrit : > >> The plain xorg 6.8.2 seems not be able to >> recognize the card (at least the mine). >> Do you have used the patch : >> http://apocalyptech.com/linux/nc6120/xorg-6.8.2-i810.patch >> to compile it ? > >No it works out of the box for me. Confirmed. On my Fujitsu-Siemens lifebook p7010 (intel 855GM) the same enviroment (xorg 6.8.2 , dri-devel, module i915 in the kernel) let me have about 750 fps. Not so much but enough to play quake3 on this ultralow voltage centrino box. Is there anyone here that can share it's xorg.conf to use something of the new accel features of the card. Thanks... P.s. I tried also the patch for xorg 6.8.2 for using the i915 card but without any success to let it use the dri. Someone is taking care of this iussue ? :-) Happy New Year to everyone !!! Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://utenti.gufi.org/~gmarco/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
Le Jeudi 29 Décembre 2005 07:59, Gianmarco Giovannelli a écrit : > The plain xorg 6.8.2 seems not be able to > recognize the card (at least the mine). > Do you have used the patch : > http://apocalyptech.com/linux/nc6120/xorg-6.8.2-i810.patch > to compile it ? No it works out of the box for me. > I think there is a big confusion about this new module (i915). Yes, may be there are many different chipsets for this module ? > I hope that someone (Eric ?:-) take care of all this iussue as ap :-) > > Happy new year to everyone Thanks. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
At 22.16 27/12/2005, Patrick Lamaizière wrote: >With the patch from Alexey Popov (ftp://213.85.11.250/pub/drm3.patch) i've >got the good device /dev/dri/card0 > >> Are you sure that you're using the latest RELENG_6 _and_ >> the latest Xorg development snapshot? You need both for >> things to work correctly. > >Yes i run 6.0-STABLE, graphics/dri-devel (dri-6.2.20050719,1) and >x11-server/xorg-server-snap (xorg-server-6.8.99.903) > >With xorg-server-snap i've got the problem : >$ glxgears >ERROR: line 125, Function intelInitDriver, File intel_screen.c > >It seems better with xorg-6.8.2, dri is enabled and glxgears reports a FPS >~1200. I've got 500 FPS without DRI. The plain xorg 6.8.2 seems not be able to recognize the card (at least the mine). Do you have used the patch : http://apocalyptech.com/linux/nc6120/xorg-6.8.2-i810.patch to compile it ? I think there is a big confusion about this new module (i915). I hope that someone (Eric ?:-) take care of all this iussue asap :-) Happy new year to everyone Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://utenti.gufi.org/~gmarco/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
Le Lundi 19 Décembre 2005 21:35, Oliver Fromme : > Patrick Lamaizière <[EMAIL PROTECTED]> wrote: > > But dri does not work, Xorg seems to look for a /dev/dri/card0 and > > i've got only one device /dev/dri/card1 ? > Strange. It works fine for me: With the patch from Alexey Popov (ftp://213.85.11.250/pub/drm3.patch) i've got the good device /dev/dri/card0 > Are you sure that you're using the latest RELENG_6 _and_ > the latest Xorg development snapshot? You need both for > things to work correctly. Yes i run 6.0-STABLE, graphics/dri-devel (dri-6.2.20050719,1) and x11-server/xorg-server-snap (xorg-server-6.8.99.903) With xorg-server-snap i've got the problem : $ glxgears ERROR: line 125, Function intelInitDriver, File intel_screen.c It seems better with xorg-6.8.2, dri is enabled and glxgears reports a FPS ~1200. I've got 500 FPS without DRI. more info about the chipset: [EMAIL PROTECTED]:2:0: class=0x03 card=0x01641028 chip=0x35828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics Device' class= display subclass = VGA Thanks. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 dawnshade wrote: > On Friday 23 December 2005 08:11, Gianmarco Giovannelli wrote: > >>At 08.10 22/12/2005, dawnshade wrote: >> >On Thursday 22 December 2005 04:22, Gianmarco Giovannelli wrote: >> >> It seems to me that also Oliver has the same bug (0M) on his 915GM >> >> Any other with with centrino based 915 card can confirm this ? >> > >> >for me works fine: >> > >> >dmesg |grep -E 'drm|agp' >> >agp0: port 0xe000-0xe007 mem >> >0xd000-0xd007,0xa000-0xafff,0xd008-0xd00b irq 5 >> > at device 2.0 on pci0 >> >agp0: detected 7932k stolen memory >> >agp0: aperture size is 256M >> >drmsub0: : (child of agp_i810.c) on agp0 >> >info: [drm] AGP at 0xd000 0MB >> >info: [drm] Initialized i915 1.2.0 20041217 >> >>Uhm... you have the same 0M of me :-) >>Have you tried glxgears ? >>What are your results ? > > > glxinfo: > > name of display: :0.0 > display: :0 screen: 0 > direct rendering: Yes > server glx vendor string: SGI > > >> >try to upgrade port dri to dri-devel >> >I have the same situation - glxinfo shows that dri disabled, after >>portupgrade >> >-f -o graphics/dri-devel dri glxgears shown 1128.200 FPS (was ~300 and ~600 >> >w/o dri) >> >>Oops I don't remember about this. >>Can you please told me which versions (dri-devel, xorg) do you have >>(because I am running dri-devel !!! :-) ? > > > pkg_info |grep dri > dri-6.2.20050719,1 DRI OpenGL drivers snapshot > linux_dri-4.4.0 Binary Linux DRI libraries for 3D hardware acceleration of > > pkg_info |grep xorg > xorg-6.8.2 X.Org distribution metaport > xorg-clients-6.8.2 X client programs and related files from X.Org > xorg-documents-6.8.2 Documentation of X11 protocol and libraries from X.Org > xorg-fonts-100dpi-6.8.2 X.Org 100dpi bitmap fonts > xorg-fonts-75dpi-6.8.2 X.Org 75dpi bitmap fonts > xorg-fonts-cyrillic-6.8.2 X.Org Cyrillic bitmap fonts > xorg-fonts-encodings-6.8.2 X.Org font encoding files > xorg-fonts-miscbitmaps-6.8.2 X.Org miscellaneous bitmap fonts > xorg-fonts-truetype-6.8.2 X.Org TrueType fonts > xorg-fonts-type1-6.8.2 X.Org Type1 fonts > xorg-fontserver-6.8.2 X font server from X.Org > xorg-libraries-6.8.2 X11 libraries and headers from X.Org > xorg-manpages-6.8.2 X.Org library manual pages > xorg-nestserver-6.8.2 Nesting X server from X.Org > xorg-printserver-6.8.2_2 X Print server from X.Org > xorg-server-6.8.99.16_1 X.Org X server development snapshot and related > programs > xorg-vfbserver-6.8.2 X virtual framebuffer server from X.Org > > So the combination of dri-devel and xorg-6.8.99.16_1 works fine. For me the latest xorg-snap (903) does not work. Anyway here is a path for the vanilla xorg 6.8.2, it works: http://apocalyptech.com/linux/nc6120/xorg-6.8.2-i810.patch Best, Laci - -- László Károly <[EMAIL PROTECTED]> Department of Altaic StudiesEgyetem str. 2. University of Szeged H-6722 Szeged, Hungary PGP/GnuPG key: 1024D/869D81C5 Fingerprint: 1E61 3205 8F5A 87E7 1269 3396 1C63 F9FF 869D 81C5 Encrypted e-mail preferred. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (FreeBSD) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDrABuHGP5/4adgcURAkBpAJ9wjYqt9QCnTCAJTssO9H6argIM2ACfSKjd xR1Y/REFY5Be0O7bLE2+EJI= =iRsr -END PGP SIGNATURE- ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
On Friday 23 December 2005 08:11, Gianmarco Giovannelli wrote: > At 08.10 22/12/2005, dawnshade wrote: > >On Thursday 22 December 2005 04:22, Gianmarco Giovannelli wrote: > >> It seems to me that also Oliver has the same bug (0M) on his 915GM > >> Any other with with centrino based 915 card can confirm this ? > > > >for me works fine: > > > >dmesg |grep -E 'drm|agp' > >agp0: port 0xe000-0xe007 mem > >0xd000-0xd007,0xa000-0xafff,0xd008-0xd00b irq 5 > > at device 2.0 on pci0 > >agp0: detected 7932k stolen memory > >agp0: aperture size is 256M > >drmsub0: : (child of agp_i810.c) on agp0 > >info: [drm] AGP at 0xd000 0MB > >info: [drm] Initialized i915 1.2.0 20041217 > > Uhm... you have the same 0M of me :-) > Have you tried glxgears ? > What are your results ? glxinfo: name of display: :0.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig client glx vendor string: SGI client glx version string: 1.4 client glx extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) 915GM 20050225 OpenGL version string: 1.3 Mesa 6.3 OpenGL extensions: GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters, GL_ARB_shadow, GL_ARB_texture_border_clamp, GL_ARB_texture_compression, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_histogram, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1, GL_APPLE_client_storage, GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate, GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SUN_multi_draw_arrays glu version: 1.3 glu extensions: GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat -- 0x23 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None 0x24 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None 0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x26 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x27 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow 0x28 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow 0x29 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow 0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16
Re: i915drm
At 13.00 20/12/2005, dawnshade wrote: >On Tuesday 20 December 2005 11:37, Gianmarco Giovannelli wrote: >> hp:/home/gmarco> glxgears >> ERROR: line 125, Function intelInitDriver, File intel_screen.c >> libGL warning: 3D driver returned no fbconfigs. >> libGL error: InitDriver failed >> libGL error: reverting to (slow) indirect rendering >> 1024 frames in 5.0 seconds = 204.800 FPS >> 1260 frames in 5.0 seconds = 252.000 FPS >> 1267 frames in 5.0 seconds = 253.400 FPS >> >> (before patch it used to be about 600) > >try to upgrade port dri to dri-devel >I have the same situation - glxinfo shows that dri disabled, after portupgrade >-f -o graphics/dri-devel dri glxgears shown 1128.200 FPS (was ~300 and ~600 >w/o dri) Oops I don't remember about this. Can you please told me which versions (dri-devel, xorg) do you have (because I am running dri-devel !!! :-) ? Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://utenti.gufi.org/~gmarco/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
At 08.10 22/12/2005, dawnshade wrote: >On Thursday 22 December 2005 04:22, Gianmarco Giovannelli wrote: >> It seems to me that also Oliver has the same bug (0M) on his 915GM >> Any other with with centrino based 915 card can confirm this ? > >for me works fine: > >dmesg |grep -E 'drm|agp' >agp0: port 0xe000-0xe007 mem >0xd000-0xd007,0xa000-0xafff,0xd008-0xd00b irq 5 at >device 2.0 on pci0 >agp0: detected 7932k stolen memory >agp0: aperture size is 256M >drmsub0: : (child of agp_i810.c) on agp0 >info: [drm] AGP at 0xd000 0MB >info: [drm] Initialized i915 1.2.0 20041217 Uhm... you have the same 0M of me :-) Have you tried glxgears ? What are your results ? Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://utenti.gufi.org/~gmarco/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
On Thursday 22 December 2005 04:22, Gianmarco Giovannelli wrote: > It seems to me that also Oliver has the same bug (0M) on his 915GM > Any other with with centrino based 915 card can confirm this ? for me works fine: dmesg |grep -E 'drm|agp' agp0: port 0xe000-0xe007 mem 0xd000-0xd007,0xa000-0xafff,0xd008-0xd00b irq 5 at device 2.0 on pci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M drmsub0: : (child of agp_i810.c) on agp0 info: [drm] AGP at 0xd000 0MB info: [drm] Initialized i915 1.2.0 20041217 [EMAIL PROTECTED]:2:0: class=0x03 card=0x007a1025 chip=0x25928086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82915GM/GMS, 82910GML Integrated Graphics Device' class= display subclass = VGA 6-Stable, after MFC i915drm code. Acer TM 4151LMi ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
At 12.54 21/12/2005, you wrote: Hi. Alexey Popov wrote: >> > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't i915 DRM is not fully supported in -stable. You may try 7-current or this hack: ftp://213.85.11.250/pub/drm3.patch . >>> I have applied the patch et voila' :-) >>> drmsub0: : (child of agp_i810.c) on agp0 >>> info: [drm] AGP at 0xb008 0MB Not sure, but I think "0MB" here is weird. Full output (from Gianmarco): pci0: on pcib0 agp0: port 0x1800-0x1807 mem 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at device 2.0 on pci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M drmsub0: : (child of agp_i810.c) on agp0 info: [drm] AGP at 0xb008 0MB info: [drm] Initialized i915 1.2.0 20041217 pci0: at device 2.1 (no driver attached) Aperture size 256MB should be printed here instead of 0MB. There is three different i915gm with this bug reported: http://freebsd.rambler.ru/bsdmail/freebsd-stable_curr/msg3.html I think this bug is i915gm only, but have no hardware to dig in. I reply also in this list for the people not subscribed to the x11 list :-) It seems to me that also Oliver has the same bug (0M) on his 915GM ... Any other with with centrino based 915 card can confirm this ? If someone need a tester to fix it I am ready to help. Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://utenti.gufi.org/~gmarco/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
Hi. Gianmarco Giovannelli wrote: >> > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't i915 DRM is not fully supported in -stable. You may try 7-current or this hack: ftp://213.85.11.250/pub/drm3.patch . >>> I have applied the patch et voila' :-) >>> drmsub0: : (child of agp_i810.c) on agp0 >>> info: [drm] AGP at 0xb008 0MB >>> info: [drm] Initialized i915 1.2.0 20041217 >>> hp:/home/gmarco> glxgears >>> ERROR: line 125, Function intelInitDriver, File intel_screen.c >> Works for me with graphics/dri-devel and x11-server/xorg-server >The combination of graphics/dri-devel and x11-servers/xorg-server is not >suitable for i915gm. This chip is only supported by >x11-servers/xorg-server-snap. However it does not work well with either >graphics/dri-devel or dri from cvs (as of today). Infact I have tried all the combinations me too, but I found that plain xorg 6.8.2 doesn't work after the patch (it seems to remember it used to work before, but I can be wrong) and with the latest snapshot (903) the latest dri produces the error above resulting slover than before the patch. Is there any diagnostics on how plain xorg doesn't work? Personally I just made patch for successfully initializing i915.ko. I think, freebsd-x11 is better list for this thread. May be Eric can say something? With best regards, Alexey Popov ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
At 23.56 20/12/2005, you wrote: >> > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't i915 DRM is not fully supported in -stable. You may try 7-current or this hack: ftp://213.85.11.250/pub/drm3.patch . >>> >>> I have applied the patch et voila' :-) >>> drmsub0: : (child of agp_i810.c) on agp0 >>> info: [drm] AGP at 0xb008 0MB >>> info: [drm] Initialized i915 1.2.0 20041217 >>> hp:/home/gmarco> glxgears >>> ERROR: line 125, Function intelInitDriver, File intel_screen.c >> >> This looks like incompatibility between graphics/dri and xorg-server. >> See this thread: >> http://freebsd.rambler.ru/bsdmail/freebsd-x11_2005/msg00907.html >> Works for me with graphics/dri-devel and x11-server/xorg-server >> >The combination of graphics/dri-devel and x11-servers/xorg-server is not >suitable for i915gm. This chip is only supported by >x11-servers/xorg-server-snap. However it does not work well with either >graphics/dri-devel or dri from cvs (as of today). Infact I have tried all the combinations me too, but I found that plain xorg 6.8.2 doesn't work after the patch (it seems to remember it used to work before, but I can be wrong) and with the latest snapshot (903) the latest dri produces the error above resulting slover than before the patch. Any other idea/test/patch ? Let's keep fighting ... :-) Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://utenti.gufi.org/~gmarco/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
At 23.56 20/12/2005, you wrote: >> > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't i915 DRM is not fully supported in -stable. You may try 7-current or this hack: ftp://213.85.11.250/pub/drm3.patch . >>> >>> I have applied the patch et voila' :-) >>> drmsub0: : (child of agp_i810.c) on agp0 >>> info: [drm] AGP at 0xb008 0MB >>> info: [drm] Initialized i915 1.2.0 20041217 >>> hp:/home/gmarco> glxgears >>> ERROR: line 125, Function intelInitDriver, File intel_screen.c >> >> This looks like incompatibility between graphics/dri and xorg-server. >> See this thread: >> http://freebsd.rambler.ru/bsdmail/freebsd-x11_2005/msg00907.html >> Works for me with graphics/dri-devel and x11-server/xorg-server >> >The combination of graphics/dri-devel and x11-servers/xorg-server is not >suitable for i915gm. This chip is only supported by >x11-servers/xorg-server-snap. However it does not work well with either >graphics/dri-devel or dri from cvs (as of today). Infact I have tried all the combinations me too, but I found that plain xorg 6.8.2 doesn't work after the patch (it seems to remember it used to work before, but I can be wrong) and with the latest snapshot (903) the latest dri produces the error above resulting slover than before the patch. Any other idea/test/patch ? Let's keep fighting ... :-) Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://utenti.gufi.org/~gmarco/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexey Popov wrote: > Hi. > > Gianmarco Giovannelli wrote: > > > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't >>> >>> i915 DRM is not fully supported in -stable. You may try 7-current or >>> this hack: ftp://213.85.11.250/pub/drm3.patch . >> >> I have applied the patch et voila' :-) >> drmsub0: : (child of agp_i810.c) on agp0 >> info: [drm] AGP at 0xb008 0MB >> info: [drm] Initialized i915 1.2.0 20041217 >> hp:/home/gmarco> glxgears >> ERROR: line 125, Function intelInitDriver, File intel_screen.c > > This looks like incompatibility between graphics/dri and xorg-server. > See this thread: > http://freebsd.rambler.ru/bsdmail/freebsd-x11_2005/msg00907.html > Works for me with graphics/dri-devel and x11-server/xorg-server > The combination of graphics/dri-devel and x11-servers/xorg-server is not suitable for i915gm. This chip is only supported by x11-servers/xorg-server-snap. However it does not work well with either graphics/dri-devel or dri from cvs (as of today). Any idea? Best, Laci - -- László Károly <[EMAIL PROTECTED]> Department of Altaic StudiesEgyetem str. 2. University of Szeged H-6722 Szeged, Hungary PGP/GnuPG key: 1024D/869D81C5 Fingerprint: 1E61 3205 8F5A 87E7 1269 3396 1C63 F9FF 869D 81C5 Encrypted e-mail preferred. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (FreeBSD) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDqIwwHGP5/4adgcURAmoSAJ0Tr5UwwA3fl8akGg8lH83N4Km32QCfT97E abCFhp+R/kC0EFBI89YI+2Y= =RCvf -END PGP SIGNATURE- ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
On Tuesday 20 December 2005 11:37, Gianmarco Giovannelli wrote: > hp:/home/gmarco> glxgears > ERROR: line 125, Function intelInitDriver, File intel_screen.c > libGL warning: 3D driver returned no fbconfigs. > libGL error: InitDriver failed > libGL error: reverting to (slow) indirect rendering > 1024 frames in 5.0 seconds = 204.800 FPS > 1260 frames in 5.0 seconds = 252.000 FPS > 1267 frames in 5.0 seconds = 253.400 FPS > > (before patch it used to be about 600) try to upgrade port dri to dri-devel I have the same situation - glxinfo shows that dri disabled, after portupgrade -f -o graphics/dri-devel dri glxgears shown 1128.200 FPS (was ~300 and ~600 w/o dri) ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
Hi. Gianmarco Giovannelli wrote: > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't i915 DRM is not fully supported in -stable. You may try 7-current or this hack: ftp://213.85.11.250/pub/drm3.patch . I have applied the patch et voila' :-) drmsub0: : (child of agp_i810.c) on agp0 info: [drm] AGP at 0xb008 0MB info: [drm] Initialized i915 1.2.0 20041217 hp:/home/gmarco> glxgears ERROR: line 125, Function intelInitDriver, File intel_screen.c This looks like incompatibility between graphics/dri and xorg-server. See this thread: http://freebsd.rambler.ru/bsdmail/freebsd-x11_2005/msg00907.html Works for me with graphics/dri-devel and x11-server/xorg-server With best regards, Alexey Popov ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
At 08.04 20/12/2005, you wrote: Hi. László Károly wrote: > drmsub0: port 0x1800-0x1807 mem > 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at > device 2.0 on pci0 > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP. > device_attach: drmsub0 attach returned 12 > pci0: at device 2.1 (no driver attached) i915 DRM is not fully supported in -stable. You may try 7-current or this hack: ftp://213.85.11.250/pub/drm3.patch . Thanks for the input. I have applied the patch et voila' :-) pci0: on pcib0 agp0: controller> port 0x1800-0x1807 mem 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at device 2.0 on pci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M drmsub0: : (child of agp_i810.c) on agp0 info: [drm] AGP at 0xb008 0MB info: [drm] Initialized i915 1.2.0 20041217 pci0: at device 2.1 (no driver attached) Uhm... we are a very big step ahead :-) But ... hp:/home/gmarco> glxgears ERROR: line 125, Function intelInitDriver, File intel_screen.c libGL warning: 3D driver returned no fbconfigs. libGL error: InitDriver failed libGL error: reverting to (slow) indirect rendering 1024 frames in 5.0 seconds = 204.800 FPS 1260 frames in 5.0 seconds = 252.000 FPS 1267 frames in 5.0 seconds = 253.400 FPS (before patch it used to be about 600) and glxinfo: name of display: :0.0 display: :0 screen: 0 direct rendering: No server glx vendor string: SGI server glx version string: 1.2 server glx extensions: [...] even if the xorg.log: (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/libint10.so (II) I810(0): initializing int10 (==) I810(0): Write-combining range (0xa,0x2) was already clear (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (==) I810(0): Write-combining range (0x0,0x1000) was already clear (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 7872 kB (II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): Allocated 128 kB for the ring buffer at 0x0 (II) I810(0): Allocating at least 256 scanlines for pixmap cache (II) I810(0): Initial framebuffer allocation size: 8192 kByte (II) I810(0): Allocated 4 kB for HW cursor at 0x000 (0x2e3c) (WW) I810(0): xf86AllocateGARTMemory: allocation of 4 pages failed (Cannot allocate memory) (EE) I810(0): Failed to allocate HW (ARGB) cursor space. (II) I810(0): Allocated 4 kB for Overlay registers at 0xfffe000 (0x2e9a1000). (II) I810(0): Allocated 64 kB for the scratch buffer at 0xffee000 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenByBusid: Searching for BusID pci::00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenByBusid: drmOpenMinor returns 7 drmOpenByBusid: drmGetBusid reports pci::00:02.0 (II) I810(0): [drm] DRM interface version 1.2 (II) I810(0): [drm] created "i915" driver at busid "pci::00:02.0" (II) I810(0): [drm] added 8192 byte SAREA at 0xc4d8 (II) I810(0): [drm] mapped SAREA 0xc4d8 to 0x286c9000 (II) I810(0): [drm] framebuffer handle = 0xc002 (II) I810(0): [drm] added 1 reserved context for kernel (II) I810(0): Allocated 6144 kB for the back buffer at 0xf00. (II) I810(0): Allocated 6144 kB for the depth buffer at 0xe80. (II) I810(0): Allocated 32 kB for the logical context at 0xe7f8000. (II) I810(0): Allocated 44800 kB for textures at 0x82 (II) I810(0): Updated framebuffer allocation size from 8192 to 8216 kByte (II) I810(0): Updated pixmap cache from 256 scanlines to 259 scanlines (II) I810(0): 0x81e592c: Memory at offset 0x0002, size 8216 kBytes (II) I810(0): 0x81e3320: Memory at offset 0x0000, size 4 kBytes (II) I810(0): 0x81e3340: Memory at offset 0x, size 0 kBytes (II) I810(0): 0x81e0f84: Memory at offset 0x, size 128 kBytes (II) I810(0): 0x81e596c: Memory at offset 0x0ffee000, size 64 kBytes (II) I810(0): 0x81e3360: Memory at offset 0x0fffe000, size 4 kBytes (II) I810(0): 0x81e59bc: Memory at offset 0x0f00, size 6144 kBytes (II) I810(0): 0x81e59dc: Memory at offset 0x0e80, size 6144 kBytes (II) I810(0): 0x81e5a1c: Memory at offset 0x0e7f8000, size 32 kBytes (II) I810(0): 0x81e59fc: Memory at offset 0x0082, size 44800 kBytes (II) I810(0): Activating tiled memory for the back buffer. (II) I810(0): Activating tiled memory for the depth buffer. (II) I810(0): [drm] Registers = 0xb008 (II) I810(0): [drm] Back Buffer = 0xcf00 (II) I810(0): [drm] Depth Buffer = 0xce80 (I
Re: i915drm
At 21.29 19/12/2005, Oliver Fromme wrote: >Gianmarco <[EMAIL PROTECTED]> wrote: > > I am running FreeBSD 6.0-STABLE (of today) on a HP Pavillon (centrino based > > notebook with i915 graphic chipset). > >Same here (Centrino, i915, not HP though). > > > I am trying to use the latest drm hook for i915, but I get this error: > > >Is there any mentioning of an AGP device (agp0) in your >dmesg? If not, then that's probably the problem. It >is interesting that your drmsub0 comes directly as a >child of pci0. On my machine, it's a child of agp0. > >I get this in dmesg: > >agp0: port 0x1800-0x1807 > mem 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 > irq 16 at device 2.0 on pci0 >agp0: detected 7932k stolen memory >agp0: aperture size is 256M >drmsub0: : (child of agp_i810.c) on agp0 >info: [drm] AGP at 0xb008 0MB >info: [drm] Initialized i915 1.2.0 20041217 >pci0: at device 2.1 (no driver attached) > >That's with RELENG_6 from yesterday (Dec. 18, 12:00 GMT). >(By the way, it's normal that no driver is reported to be >attached to device 2.1.) Uhm.. I don't have the agp part... Should be my i915 not an agp card but i.e a pci express bus device ? In this case should I put in my kernel the agp device the same ? FreeBSD 6.0-STABLE #2: Sat Dec 17 10:38:28 CET 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/FREEBSD Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.13-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff Features2=0x180 AMD Features=0x10 real memory = 1064173568 (1014 MB) avail memory = 1036627968 (988 MB) [...] pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 drmsub0: port 0x1800-0x1807 mem 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at device 2.0 on pci0 error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP. device_attach: drmsub0 attach returned 12 pci0: at device 2.1 (no driver attached) [...] vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 >I'm using the latest Xorg development snapshot, which runs >fine, including 2D acceleration, hardware cursor and XVideo >extension with hardware acceleration (i.e. hardware scaler >and color space conversion). No problems whatsoever. Can you post your xorg.conf ? I am using it too (6.8.99.903) . I'd like to use the 3d accel mostly to play (i.e. Quake III :-) > > device agp # support several AGP chipsets > > device drm # DRM core module required by DRM drivers > > device i915drm # Intel i830 through i915 > >I have the same entries in my kernel config. Thanks for attention. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
Hi. László Károly wrote: > drmsub0: port 0x1800-0x1807 mem > 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at > device 2.0 on pci0 > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP. > device_attach: drmsub0 attach returned 12 > pci0: at device 2.1 (no driver attached) i915 DRM is not fully supported in -stable. You may try 7-current or this hack: ftp://213.85.11.250/pub/drm3.patch . With best regards, Alexey Popov ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Oliver Fromme wrote: > Gianmarco <[EMAIL PROTECTED]> wrote: > > I am running FreeBSD 6.0-STABLE (of today) on a HP Pavillon (centrino based > > notebook with i915 graphic chipset). > > Same here (Centrino, i915, not HP though). > > > I am trying to use the latest drm hook for i915, but I get this error: > > > > drmsub0: port 0x1800-0x1807 mem > > 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at > > device 2.0 on pci0 > > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize > AGP. > > device_attach: drmsub0 attach returned 12 > > pci0: at device 2.1 (no driver attached) > > Is there any mentioning of an AGP device (agp0) in your > dmesg? If not, then that's probably the problem. It > is interesting that your drmsub0 comes directly as a > child of pci0. On my machine, it's a child of agp0. > > I get this in dmesg: > > agp0: port 0x1800-0x1807 > mem 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 > irq 16 at device 2.0 on pci0 > agp0: detected 7932k stolen memory > agp0: aperture size is 256M > drmsub0: : (child of agp_i810.c) on agp0 > info: [drm] AGP at 0xb008 0MB > info: [drm] Initialized i915 1.2.0 20041217 > pci0: at device 2.1 (no driver attached) > In my HP Compaq nx6110 (i915GM) too drmsub wants to come directly as a child of pci0: drmsub0: port 0x7000-0x7007 mem 0xd040-0xd047,0xc000-0xcfff,0xd048-0xd04b irq 16 at device 2.0 on pci0 [drm:pid0:drm_load] [drm:pid0:drm_agp_init] agp_available = 0 error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP. [drm:pid0:drm_lastclose] device_attach: drmsub0 attach returned 12 pci0: at device 2.1 (no driver attached) If I have drm loaded after boot time (by X.org) there will be agpgart but no dri/cardX... Best, Laci - -- László Károly <[EMAIL PROTECTED]> Department of Altaic StudiesEgyetem str. 2. University of Szeged H-6722 Szeged, Hungary PGP/GnuPG key: 1024D/869D81C5 Fingerprint: 1E61 3205 8F5A 87E7 1269 3396 1C63 F9FF 869D 81C5 Encrypted e-mail preferred. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (FreeBSD) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDp026HGP5/4adgcURAt33AJ9GrO4sLJEMWguEqK/4JqaRWPXO/wCglKHu Txo1xArRPtpJMGeO0jLTKII= =6NZN -END PGP SIGNATURE- ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
Patrick Lamaizière <[EMAIL PROTECTED]> wrote: > But dri does not work, Xorg seems to look for a /dev/dri/card0 and i've got > only one device /dev/dri/card1 ? > > Xorg.log: > (II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fee000 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is -1, (No such file or directory) > drmOpenDevice: open result is -1, (No such file or directory) > drmOpenDevice: Open failed > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is -1, (No such file or directory) > drmOpenDevice: open result is -1, (No such file or directory) > drmOpenDevice: Open failed > [drm] failed to load kernel module "i915" Strange. It works fine for me: (II) I810(0): Allocated 64 kB for the scratch buffer at 0xffee000 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci::00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci::00:02.0 (II) I810(0): [drm] DRM interface version 1.2 (II) I810(0): [drm] created "i915" driver at busid "pci::00:02.0" (II) I810(0): [drm] added 8192 byte SAREA at 0xc5307000 (II) I810(0): [drm] mapped SAREA 0xc5307000 to 0x28744000 (II) I810(0): [drm] framebuffer handle = 0xc002 (II) I810(0): [drm] added 1 reserved context for kernel .. etc. ... Are you sure that you're using the latest RELENG_6 _and_ the latest Xorg development snapshot? You need both for things to work correctly. (I'm not using DRM/DRI, because I'm not playing games on my notebook, and I don't need 3D OpenGL "screen savers" either, but according to the logs and everything, it is detected and initialized correctly. However, I am using the XVideo extension for full-screen video playback with hardware acceleration, and that requires the presence of DRM, too -- that's why I configured it in my kernel.) Best regards Oliver -- Oliver Fromme, secnetix GmbH & Co. KG, Marktplatz 29, 85567 Grafing Dienstleistungen mit Schwerpunkt FreeBSD: http://www.secnetix.de/bsd Any opinions expressed in this message may be personal to the author and may not necessarily reflect the opinions of secnetix in any way. "The ITU has offered the IETF formal alignment with its corresponding technology, Penguins, but that won't fly." -- RFC 2549 ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
Gianmarco <[EMAIL PROTECTED]> wrote: > I am running FreeBSD 6.0-STABLE (of today) on a HP Pavillon (centrino based > notebook with i915 graphic chipset). Same here (Centrino, i915, not HP though). > I am trying to use the latest drm hook for i915, but I get this error: > > drmsub0: port 0x1800-0x1807 mem > 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at > device 2.0 on pci0 > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize > AGP. > device_attach: drmsub0 attach returned 12 > pci0: at device 2.1 (no driver attached) Is there any mentioning of an AGP device (agp0) in your dmesg? If not, then that's probably the problem. It is interesting that your drmsub0 comes directly as a child of pci0. On my machine, it's a child of agp0. I get this in dmesg: agp0: port 0x1800-0x1807 mem 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at device 2.0 on pci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M drmsub0: : (child of agp_i810.c) on agp0 info: [drm] AGP at 0xb008 0MB info: [drm] Initialized i915 1.2.0 20041217 pci0: at device 2.1 (no driver attached) That's with RELENG_6 from yesterday (Dec. 18, 12:00 GMT). (By the way, it's normal that no driver is reported to be attached to device 2.1.) I'm using the latest Xorg development snapshot, which runs fine, including 2D acceleration, hardware cursor and XVideo extension with hardware acceleration (i.e. hardware scaler and color space conversion). No problems whatsoever. > device agp # support several AGP chipsets > device drm # DRM core module required by DRM drivers > device i915drm # Intel i830 through i915 I have the same entries in my kernel config. > and my pciconf -vl shows: > > [EMAIL PROTECTED]:2:0: class=0x03 card=0x3080103c chip=0x25928086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82915GM/GMS, 82910GML Integrated Graphics Device' > class= display > subclass = VGA > [EMAIL PROTECTED]:2:1: class=0x038000 card=0x3080103c chip=0x27928086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82915GM/GMS,82910GML Mobile Express Family Graphics > Controller (??)' > class= display Just for comparison, this is mine: [EMAIL PROTECTED]:2:0: class=0x03 card=0xc01a144d chip=0x25928086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82915GM/GMS, 82910GML Integrated Graphics Device' class= display subclass = VGA [EMAIL PROTECTED]:2:1: class=0x038000 card=0xc01a144d chip=0x27928086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82915GM/GMS,82910GML Mobile Express Family Graphics Controller (??)' class= display Looks pretty much the same. Best regards Oliver -- Oliver Fromme, secnetix GmbH & Co. KG, Marktplatz 29, 85567 Grafing Dienstleistungen mit Schwerpunkt FreeBSD: http://www.secnetix.de/bsd Any opinions expressed in this message may be personal to the author and may not necessarily reflect the opinions of secnetix in any way. "I learned Java 3 years before Python. It was my language of choice. It took me two weekends with Python before I was more productive with it than with Java." -- Anthony Roberts ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
Le Dimanche 18 Décembre 2005 01:31, Gianmarco a écrit : > I am trying to use the latest drm hook for i915, but I get this error: > > drmsub0: port 0x1800-0x1807 mem > 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 > at device 2.0 on pci0 > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize > AGP. device_attach: drmsub0 attach returned 12 > pci0: at device 2.1 (no driver attached) > > > Any idea ? > > I have added to my kernel: > > device agp # support several AGP chipsets > device drm # DRM core module required by DRM drivers > device i915drm # Intel i830 through i915 Just put agp, Xorg will load i915.ko. I've got the same problem. But dri does not work, Xorg seems to look for a /dev/dri/card0 and i've got only one device /dev/dri/card1 ? Xorg.log: (II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fee000 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such file or directory) drmOpenDevice: open result is -1, (No such file or directory) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such file or directory) drmOpenDevice: open result is -1, (No such file or directory) drmOpenDevice: Open failed [drm] failed to load kernel module "i915" ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i915drm
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Gianmarco wrote: > HI all, > I am running FreeBSD 6.0-STABLE (of today) on a HP Pavillon (centrino based > notebook with i915 graphic chipset). > > I am trying to use the latest drm hook for i915, but I get this error: > > drmsub0: port 0x1800-0x1807 mem > 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at > device 2.0 on pci0 > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP. > device_attach: drmsub0 attach returned 12 > pci0: at device 2.1 (no driver attached) > > > Any idea ? > > I have added to my kernel: > > device agp # support several AGP chipsets > device drm # DRM core module required by DRM drivers > device i915drm # Intel i830 through i915 > > and my pciconf -vl shows: > > [EMAIL PROTECTED]:2:0: class=0x03 card=0x3080103c chip=0x25928086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82915GM/GMS, 82910GML Integrated Graphics Device' > class= display > subclass = VGA > [EMAIL PROTECTED]:2:1: class=0x038000 card=0x3080103c chip=0x27928086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82915GM/GMS,82910GML Mobile Express Family Graphics Controller > (??)' > class= display > > > Do I miss something ? Thanks ... > I have the same experience. But note that i915 (both agp and drm) is still in beta stage. Check this PR: http://www.freebsd.org/cgi/query-pr.cgi?pr=80396 (Problem Report kern/80396 : [agp] i915 AGP not supported). Best, Laci - -- László Károly <[EMAIL PROTECTED]> Department of Altaic StudiesEgyetem str. 2. University of Szeged H-6722 Szeged, Hungary PGP/GnuPG key: 1024D/869D81C5 Fingerprint: 1E61 3205 8F5A 87E7 1269 3396 1C63 F9FF 869D 81C5 Encrypted e-mail preferred. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (FreeBSD) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDpSuiHGP5/4adgcURAvMGAJ9xH4eVDTi9diO0EFL6P46nA/T4gACfdzDG Zbmfn16b72QAyMhqk6kRt2g= =ebZC -END PGP SIGNATURE- ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
i915drm
HI all, I am running FreeBSD 6.0-STABLE (of today) on a HP Pavillon (centrino based notebook with i915 graphic chipset). I am trying to use the latest drm hook for i915, but I get this error: drmsub0: port 0x1800-0x1807 mem 0xb008-0xb00f,0xc000-0xcfff,0xb000-0xb003 irq 16 at device 2.0 on pci0 error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP. device_attach: drmsub0 attach returned 12 pci0: at device 2.1 (no driver attached) Any idea ? I have added to my kernel: device agp # support several AGP chipsets device drm # DRM core module required by DRM drivers device i915drm # Intel i830 through i915 and my pciconf -vl shows: [EMAIL PROTECTED]:2:0: class=0x03 card=0x3080103c chip=0x25928086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82915GM/GMS, 82910GML Integrated Graphics Device' class= display subclass = VGA [EMAIL PROTECTED]:2:1: class=0x038000 card=0x3080103c chip=0x27928086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82915GM/GMS,82910GML Mobile Express Family Graphics Controller (??)' class= display Do I miss something ? Thanks ... -- Open WebMail Project (http://openwebmail.org) ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
