subject:"old new device\: another sample of DWA\-125"

Re: old new device: another sample of DWA-125

2014-08-15 Thread Volodymyr Kostyrko


On 15.08.2014 04:41, Kevin Lo wrote:

The D-Link DWA-125 rev D1 uses the RTL8188EU chip.
Please try this patch, thanks.


Hm, looks better:

# ifconfig wlan0 list scan
SSID/MESH IDBSSID  CHAN RATE   S:N INT CAPS
NS  54:04:a6:5b:03:801   54M -140:-95  100 EP   RSN 
HTCAP WPS WME
ms18883 a0:f3:c1:b5:ec:081   54M -140:-95  100 EPS  RSN 
HTCAP WME ATH WPS
TP-LINK_7EAADE  a0:f3:c1:7e:aa:de6   54M -140:-95  100 EPS  RSN 
HTCAP WPA WME ATH WPS
TP-LINK_58DE70  10:fe:ed:58:de:706   54M -140:-95  100 ES   HTCAP 
WME ATH WPS
kyivstar21  10:fe:ed:59:71:1a   11   54M -140:-95  100 EPS  RSN 
HTCAP WME ATH WPS
Kyivstar-ho...  f8:1a:67:76:54:10   11   54M -140:-95  100 EPS  RSN 
HTCAP WPA WME ATH WPS
TP-LINK_C9C02C  c0:4a:00:c9:c0:2c1   54M -140:-95  100 EPS  RSN 
HTCAP WPA WME ATH WPS


But it still can't join the network, two minutes passed:

wlan0: flags=8c43 metric 
0 mtu 1500

ether c4:a8:1d:f3:b7:4a
inet6 fe80::c6a8:1dff:fef3:b74a%wlan0 prefixlen 64 scopeid 0x7
nd6 options=21
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid TP-LINK_58DE70 channel 8 (2447 MHz 11g)
regdomain NONE country UA authmode OPEN privacy OFF txpower 30
bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 
roam:rssi 7

roam:rate 5 protmode CTS bintval 0

Same configuration, ath_pci:

wlan0: flags=8843 metric 0 mtu 1500
ether c0:4a:00:eb:4c:17
inet6 fe80::c24a:ff:feeb:4c17%wlan0 prefixlen 64 scopeid 0x6
inet 192.168.1.105 netmask 0xff00 broadcast 192.168.1.255
nd6 options=21
media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
status: associated
ssid TP-LINK_58DE70 channel 6 (2437 MHz 11g ht/40-) bssid 
10:fe:ed:58:de:70

regdomain NONE country UA indoor ecm authmode OPEN privacy OFF
txpower 30 bmiss 7 scanvalid 60 protmode CTS ampdulimit 64k shortgi
wme burst

--
Sphinx of black quartz judge my vow.
___
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Re: old new device: another sample of DWA-125

2014-08-14 Thread Kevin Lo

On Wed, Aug 13, 2014 at 04:25:33PM +0300, Volodymyr Kostyrko wrote:
> 
> Hi all.

Hi,

> I have something called DWA-125 (model D1A, h/w ver: D1, f/w ver: 4.00).
> 
> # usbconfig -d 6.2 dump_device_desc
> ugen6.2:  at usbus6, cfg=0 md=HOST 
> spd=HIGH (480Mbps) pwr=ON (500mA)
> 
>bLength = 0x0012
>bDescriptorType = 0x0001
>bcdUSB = 0x0200
>bDeviceClass = 0x
>bDeviceSubClass = 0x
>bDeviceProtocol = 0x
>bMaxPacketSize0 = 0x0040
>idVendor = 0x2001
>idProduct = 0x330f
>bcdDevice = 0x
>iManufacturer = 0x0001  
>iProduct = 0x0002  
>iSerialNumber = 0x0003  
>bNumConfigurations = 0x0001
> 
> Patch to detect it:
> 
> Index: sys/dev/usb/usbdevs
> ===
> --- sys/dev/usb/usbdevs (revision 269923)
> +++ sys/dev/usb/usbdevs (working copy)
> @@ -1624,6 +1624,7 @@
>   productDLINK RTL8192CU_1   0x3307  RTL8192CU
>   productDLINK RTL8192CU_2   0x3309  RTL8192CU
>   productDLINK RTL8192CU_3   0x330a  RTL8192CU
> +productDLINK RTL8192CU_4   0x330f  RTL8192CU
>   productDLINK DWA131B   0x330d  DWA-131 rev B
>   product DLINK2 RTL8192SU_1 0x3300  RTL8192SU
>   product DLINK2 RTL8192SU_2 0x3302  RTL8192SU
> Index: sys/dev/usb/wlan/if_urtwn.c
> ===
> --- sys/dev/usb/wlan/if_urtwn.c (revision 269923)
> +++ sys/dev/usb/wlan/if_urtwn.c (working copy)
> @@ -112,6 +112,7 @@
>  URTWN_DEV(DLINK,RTL8192CU_1),
>  URTWN_DEV(DLINK,RTL8192CU_2),
>  URTWN_DEV(DLINK,RTL8192CU_3),
> +   URTWN_DEV(DLINK,RTL8192CU_4),
>  URTWN_DEV(DLINK,DWA131B),
>  URTWN_DEV(EDIMAX,   EW7811UN),
>  URTWN_DEV(EDIMAX,   RTL8192CU),
> 
> # kldload urtwn
> Aug 13 16:10:19 limbo kernel: urtwn0:  class 0/0, rev 2.00/0.00, addr 1> on usbus6
> Aug 13 16:10:20 limbo kernel: urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
> 
> urtwn0: flags=8802 metric 0 mtu 2290
>  ether 00:00:a8:1d:f3:b7
>  nd6 options=21
>  media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>  status: no carrier
> 
> # ifconfig wlan0 create wlandev urtwn0
> # ifconfig wlan0 country ua
> # ifconfig wlan0 up scan
> 
> Gives nothing.
> 
> # ifconfig wlan0
> wlan0: flags=8843 metric 0 mtu 1500
>  ether 00:00:a8:1d:f3:b7
>  inet6 fe80::200:a8ff:fe1d:f3b7%wlan0 prefixlen 64 scopeid 0x7
>  nd6 options=21
>  media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>  status: no carrier
>  ssid "" channel 1 (2412 MHz 11b)
>  regdomain NONE country UA authmode OPEN privacy OFF txpower 30
>  bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 
> roam:rssi 7
>  roam:rate 1 bintval 0
> 
> # ifconfig wlan0 list caps
> drivercaps=2181c001
> 
> Is there any easy way to make it work or should I just dump it?

The D-Link DWA-125 rev D1 uses the RTL8188EU chip.
Please try this patch, thanks.

Index: sys/dev/usb/usbdevs
===
--- sys/dev/usb/usbdevs (revision 270007)
+++ sys/dev/usb/usbdevs (working copy)
@@ -1592,6 +1592,7 @@ product DLINK DUBE100 0x1a00  10/100 Ethernet
 product DLINK DUBE100C10x1a02  DUB-E100 rev C1
 product DLINK DSB650TX40x200c  10/100 Ethernet
 product DLINK DWL120E  0x3200  DWL-120 rev E
+product DLINK DWA125D1 0x330f  DWA-125 rev D1
 product DLINK DWL122   0x3700  DWL-122
 product DLINK DWLG120  0x3701  DWL-G120
 product DLINK DWL120F  0x3702  DWL-120 rev F
Index: sys/dev/usb/wlan/if_urtwn.c
===
--- sys/dev/usb/wlan/if_urtwn.c (revision 270007)
+++ sys/dev/usb/wlan/if_urtwn.c (working copy)
@@ -152,6 +152,7 @@ static const STRUCT_USB_HOST_ID urtwn_devs[] = {
URTWN_DEV(TRENDNET, RTL8192CU),
URTWN_DEV(ZYXEL,RTL8192CU),
/* URTWN_RTL8188E */
+   URTWN_RTL8188E_DEV(DLINK,   DWA125D1),
URTWN_RTL8188E_DEV(REALTEK, RTL8188ETV),
URTWN_RTL8188E_DEV(REALTEK, RTL8188EU),
 #undef URTWN_RTL8188E_DEV
___
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

old new device: another sample of DWA-125

2014-08-13 Thread Volodymyr Kostyrko


Hi all.

I have something called DWA-125 (model D1A, h/w ver: D1, f/w ver: 4.00).

# usbconfig -d 6.2 dump_device_desc
ugen6.2:  at usbus6, cfg=0 md=HOST 
spd=HIGH (480Mbps) pwr=ON (500mA)


  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x
  bDeviceSubClass = 0x
  bDeviceProtocol = 0x
  bMaxPacketSize0 = 0x0040
  idVendor = 0x2001
  idProduct = 0x330f
  bcdDevice = 0x
  iManufacturer = 0x0001  
  iProduct = 0x0002  
  iSerialNumber = 0x0003  
  bNumConfigurations = 0x0001

Patch to detect it:

Index: sys/dev/usb/usbdevs
===
--- sys/dev/usb/usbdevs (revision 269923)
+++ sys/dev/usb/usbdevs (working copy)
@@ -1624,6 +1624,7 @@
 productDLINK RTL8192CU_1   0x3307  RTL8192CU
 productDLINK RTL8192CU_2   0x3309  RTL8192CU
 productDLINK RTL8192CU_3   0x330a  RTL8192CU
+productDLINK RTL8192CU_4   0x330f  RTL8192CU
 productDLINK DWA131B   0x330d  DWA-131 rev B
 product DLINK2 RTL8192SU_1 0x3300  RTL8192SU
 product DLINK2 RTL8192SU_2 0x3302  RTL8192SU
Index: sys/dev/usb/wlan/if_urtwn.c
===
--- sys/dev/usb/wlan/if_urtwn.c (revision 269923)
+++ sys/dev/usb/wlan/if_urtwn.c (working copy)
@@ -112,6 +112,7 @@
URTWN_DEV(DLINK,RTL8192CU_1),
URTWN_DEV(DLINK,RTL8192CU_2),
URTWN_DEV(DLINK,RTL8192CU_3),
+   URTWN_DEV(DLINK,RTL8192CU_4),
URTWN_DEV(DLINK,DWA131B),
URTWN_DEV(EDIMAX,   EW7811UN),
URTWN_DEV(EDIMAX,   RTL8192CU),

# kldload urtwn
Aug 13 16:10:19 limbo kernel: urtwn0: class 0/0, rev 2.00/0.00, addr 1> on usbus6

Aug 13 16:10:20 limbo kernel: urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R

urtwn0: flags=8802 metric 0 mtu 2290
ether 00:00:a8:1d:f3:b7
nd6 options=21
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier

# ifconfig wlan0 create wlandev urtwn0
# ifconfig wlan0 country ua
# ifconfig wlan0 up scan

Gives nothing.

# ifconfig wlan0
wlan0: flags=8843 metric 0 mtu 1500
ether 00:00:a8:1d:f3:b7
inet6 fe80::200:a8ff:fe1d:f3b7%wlan0 prefixlen 64 scopeid 0x7
nd6 options=21
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 1 (2412 MHz 11b)
regdomain NONE country UA authmode OPEN privacy OFF txpower 30
bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 
roam:rssi 7

roam:rate 1 bintval 0

# ifconfig wlan0 list caps
drivercaps=2181c001

Is there any easy way to make it work or should I just dump it?

--
Sphinx of black quartz judge my vow.
___
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Re: old new device: another sample of DWA-125

Re: old new device: another sample of DWA-125

old new device: another sample of DWA-125

3 matches

Site Navigation

Mail list logo

Footer information