Here's an example user named foo:
foo Auth-Type := System
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-Address = 192.168.2.21,
Framed-Netmask = 255.255.255.252,
Framed-Route = "192.168.2.20/30 192.168.2.21 1",
Framed-Compression = Van-Jacobson-TCP-IP,
Idle-Timeout = 0,
Framed-MTU = 1500
Note the Framed-Route line. /30 is equivalent to 255.255.255.252
This is just an example, you could use much larger blocks.
The subscriber would configure their equipment to use the IP address
192.168.2.21. 192.168.2.22 would be an IP usable within their LAN.
Remote gateway could be available in a larger network
specified by a more general netmask for the remote gateway where
appropriate.
Alternately, if you wish, you can do this:
foo Auth-Type := System
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-Address = 192.168.2.2,
Framed-Netmask = 255.255.255.255,
Framed-Route = "192.168.3.0/28 192.168.2.2 1",
Framed-Compression = Van-Jacobson-TCP-IP,
Idle-Timeout = 0,
Framed-MTU = 1500
This would instead of providing a merged LAN IP block provide a
WAN/LAN-style structure, where you could give each dialup device their own
single IP and then forward blocks over those single IPs to their LAN. In
this example, a /28 (13 usable addresses) is forwarded to this subscriber
for use in their LAN, they would have to have two separate interfaces, a
WAN interface for 192.168.2.2 and a LAN interface where they define one of
the IPs in the 192.168.3.0 block (such as 192.168.3.1).
--
Mark P. Hennessy [EMAIL PROTECTED]
On Mon, 19 Aug 2002, Li Lin wrote:
> Date: Mon, 19 Aug 2002 17:43:31 -0400
> From: Li Lin <[EMAIL PROTECTED]>
> To: 'Mark Hennessy' <[EMAIL PROTECTED]>
> Cc: Li Lin <[EMAIL PROTECTED]>
> Subject: RE: IP Pool questions
>
> Hi Mark:
>
> Yes, I am trying to set up a block of IPs to be passed to a subscriber.
>
> Thanks
>
> Li Lin
>
> -Original Message-
> From: Mark Hennessy [mailto:[EMAIL PROTECTED]]
> Sent: Monday, August 19, 2002 5:48 PM
> To: '[EMAIL PROTECTED]'
> Cc: Li Lin
> Subject: Re: IP Pool questions
>
> Are you trying to set up a block of IPs to be passed to a subscriber, or
> dynamically assign an IP from a pool to a subscriber?
>
> --
> Mark P. Hennessy
> [EMAIL PROTECTED]
>
> On Mon, 19 Aug 2002, Li Lin wrote:
>
> > Date: Mon, 19 Aug 2002 17:38:10 -0400
> > From: Li Lin <[EMAIL PROTECTED]>
> > Reply-To: [EMAIL PROTECTED]
> > To: "'[EMAIL PROTECTED]'"
> > <[EMAIL PROTECTED]>
> > Cc: Li Lin <[EMAIL PROTECTED]>
> > Subject: IP Pool questions
> >
> >
> > Dear Sir/Madam:
> >
> > I have a problem to setup IP pool. (The free radius server only assigns
> one
> > IP address)
> >
> > Could you please tell me:
> >
> > 1. whether freeradius-0.3 supports IP pool or not?
> > 2. any document for IP pool?
> >
> > Thanks
> >
> > Li Lin
> >
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html