Re: rlm_sqlcounter : file not found
Hi I must appologise, by mistake I included some user list in my email to all my friends and our customers Regards Bogdan - Original Message - From: "Josephine" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 09, 2002 1:26 PM Subject: RE: rlm_sqlcounter : file not found > Aaron Weiker wrote : > >>Before compile pass --with-experimental-modules to the configure script. > >>This should compile it in. You may get other modules that fail to > >>compile, what I had to do was just remove their directory and then run > >>configure again. > > > > Hi Aaron, > I can't get what you mean 'remove their directory and then run > configure'. Which directory you are referring ? > > Please advise. Thanks in advance. > > > Josephine. > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
RE: Failed to link to module 'rlm_sqlcounter': file not found
Have you compiled with --expeimental-modules ? See http://www.freeradius.org/radiusd/doc/rlm_sqlcounter Follow this doc and everythings gona be OK ... Nicolas > -Message d'origine- > De : [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] la part de alantu > Envoyé : dimanche 6 juillet 2003 14:00 > À : [EMAIL PROTECTED] > Objet : Failed to link to module 'rlm_sqlcounter': file not found > > > freeradius-users > Hi all > According to /doc/rlm_sqlcounter ,i use sqlcounter to limit > use for using time.when i run radius under debug model(radiusd > -X) ,receive the line "Failed to link to module 'rlm_sqlcounter': > file not found" Can someone help me out ? >Best regards > > alantu > [EMAIL PROTECTED] > 2003-07-06 > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Failed to link to module 'rlm_sqlcounter': file not found
freeradius-users Hi all According to /doc/rlm_sqlcounter ,i use sqlcounter to limit use for using time.when i run radius under debug model(radiusd -X) ,receive the line "Failed to link to module 'rlm_sqlcounter': file not found" Can someone help me out ? Best regards alantu [EMAIL PROTECTED] 2003-07-06 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
RE: rlm_sqlcounter : file not found
I have the same errors with the bad interpreter errors. It was because of the file locations in the configure file being wrong. The confiure process went fine. When I tried to do the make it failed. The error I recieved was: make: /usr/src/redhat/BUILD/freeradius-0.6/libtool: Command not found So I moved the entire freeradius-0.6 directory to /usr/src/redhat/BUILD Once I did that it worked fine. Hope this helps. Incidentally, I'm not able to get the rlm_sqlcounter module to work right. I think I am missing something in my database (using MySQL). For some reason when I try to use it my authentication doesn't work. When radiusd is started with the -xx option I get a Pair not matched error on the screen. Anyone know what I am missing? Thanks, Sheldon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Josephine Sent: Monday, August 12, 2002 6:48 AM To: [EMAIL PROTECTED] Subject: Re: rlm_sqlcounter : file not found Hi Atanu, This is Josephine. I get my rlm_sqlcounter installed. Let me tell you how to do it. Run "./configure --with-experimental-modules" in where the freeradius's folder had been unzip, then "make", finally "make install". Done. Josephine. - Original Message - Dear All I am also getting the same message as Josephine. I followed Sheldon Fougere's process but i could not compile it. I even tried to reinstall freeraius and went through the whole steps. But i could not make rlm_sqlcounter to work. Atanu Das - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: rlm_sqlcounter : file not found
Hi Atanu, This is Josephine. I get my rlm_sqlcounter installed. Let me tell you how to do it. Run "./configure --with-experimental-modules" in where the freeradius's folder had been unzip, then "make", finally "make install". Done. Josephine. - Original Message - Dear All I am also getting the same message as Josephine. I followed Sheldon Fougere's process but i could not compile it. I even tried to reinstall freeraius and went through the whole steps. But i could not make rlm_sqlcounter to work. Atanu Das - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: rlm_sqlcounter : file not found
Aaron Weiker wrote : >Josephine, >If you get errors during make, first identify where the error ocurred. >If you were able to compile without any problems before doing "configure >--with-experimental-modules" but afterwards you cannot run "make" >without it quitting in an error it may be due to a module. So what you >will need to do is look at the output from "make" to identify where the >error occured. If the error occured in the ./src/modules/ directory then >it is a module that couldn't compile. If you feel that this is a module >that you do not need there is no harm in deleting the module directory >and then re-running "configure --with-experimental-modules" then try >running "make" again to see if it got all of the way. >Aaron Weiker Hi Aaron, Thank you very much. I get my rlm_sqlcounter installed. Josephine. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: rlm_sqlcounter : file not found
Dear All I am also getting the same message as Josephine. I followed Sheldon Fougere's process but i could not compile it. I even tried to reinstall freeraius and went through the whole steps. But i could not make rlm_sqlcounter to work. Atanu Das System Development SS NetCom Pvt Ltd. Dhankheti Shillong-793003 Visit us at: www.neline.com - Original Message - From: "Josephine" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, August 12, 2002 8:12 AM Subject: RE: rlm_sqlcounter : file not found > > Hi Sheldon, > > Thank you for your reply. I have tried to do ./configure in the source > directory, but failed. The error message was > 'bash : ./configure: bad interpreter: Permission denied'. Do you know what's > went wrong? Is it because of no configure executable file in the folder. > Please advise. > Thank you. > > Josephine. > > > -Original Message- > Sheldon Fougere wrote : > Hi, > > I installed 0.6 using an RPM that I built using the spec file that came with > 0.6. I tried using the rlm_sqlcounter module. It said it couldn't find > rlm_sqlcounter. I looked in the /user/lib directory but it wasn't there. I > then went to the rlm_sqlcounter source directory and did the ./configure, > make, make install. > > When I tried to start radiusd, it was then able to find it. > > Hope this helps. > Sheldon > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
RE: rlm_sqlcounter : file not found
Hi Sheldon, Thank you for your reply. I have tried to do ./configure in the source directory, but failed. The error message was 'bash : ./configure: bad interpreter: Permission denied'. Do you know what's went wrong? Is it because of no configure executable file in the folder. Please advise. Thank you. Josephine. -Original Message- Sheldon Fougere wrote : Hi, I installed 0.6 using an RPM that I built using the spec file that came with 0.6. I tried using the rlm_sqlcounter module. It said it couldn't find rlm_sqlcounter. I looked in the /user/lib directory but it wasn't there. I then went to the rlm_sqlcounter source directory and did the ./configure, make, make install. When I tried to start radiusd, it was then able to find it. Hope this helps. Sheldon - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
RE: rlm_sqlcounter : file not found
Hi, I installed 0.6 using an RPM that I built using the spec file that came with 0.6. I tried using the rlm_sqlcounter module. It said it couldn't find rlm_sqlcounter. I looked in the /user/lib directory but it wasn't there. I then went to the rlm_sqlcounter source directory and did the ./configure, make, make install. When I tried to start radiusd, it was then able to find it. Hope this helps. Sheldon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Aaron Weiker Sent: Friday, August 09, 2002 9:27 AM To: [EMAIL PROTECTED] Subject: Re: rlm_sqlcounter : file not found Josephine wrote: >Aaron Weiker wrote : > > >>>Before compile pass --with-experimental-modules to the configure script. >>>This should compile it in. You may get other modules that fail to >>>compile, what I had to do was just remove their directory and then run >>>configure again. >>> >>> > > > >Hi Aaron, >I can't get what you mean 'remove their directory and then run >configure'. Which directory you are referring ? > > >Josephine. > Josephine, If you get errors during make, first identify where the error ocurred. If you were able to compile without any problems before doing "configure --with-experimental-modules" but afterwards you cannot run "make" without it quitting in an error it may be due to a module. So what you will need to do is look at the output from "make" to identify where the error occured. If the error occured in the ./src/modules/ directory then it is a module that couldn't compile. If you feel that this is a module that you do not need there is no harm in deleting the module directory and then re-running "configure --with-experimental-modules" then try running "make" again to see if it got all of the way. Aaron Weiker > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: rlm_sqlcounter : file not found
Josephine wrote: >Aaron Weiker wrote : > > >>>Before compile pass --with-experimental-modules to the configure script. >>>This should compile it in. You may get other modules that fail to >>>compile, what I had to do was just remove their directory and then run >>>configure again. >>> >>> > > > >Hi Aaron, >I can't get what you mean 'remove their directory and then run >configure'. Which directory you are referring ? > > >Josephine. > Josephine, If you get errors during make, first identify where the error ocurred. If you were able to compile without any problems before doing "configure --with-experimental-modules" but afterwards you cannot run "make" without it quitting in an error it may be due to a module. So what you will need to do is look at the output from "make" to identify where the error occured. If the error occured in the ./src/modules/ directory then it is a module that couldn't compile. If you feel that this is a module that you do not need there is no harm in deleting the module directory and then re-running "configure --with-experimental-modules" then try running "make" again to see if it got all of the way. Aaron Weiker > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
RE: rlm_sqlcounter : file not found
Aaron Weiker wrote : >>Before compile pass --with-experimental-modules to the configure script. >>This should compile it in. You may get other modules that fail to >>compile, what I had to do was just remove their directory and then run >>configure again. Hi Aaron, I can't get what you mean 'remove their directory and then run configure'. Which directory you are referring ? Please advise. Thanks in advance. Josephine. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html