hi these are my configuration files users radius Auth-Type:= Local, User-Password == "radius" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 172.16.3.33, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = Broadcast-Listen, Framed-Filter-Id = "std.ppp", Framed-MTU = 1500, Framed-Compression = Van-Jacobsen-TCP-IP proxy.conf realm local { type = radius authhost = LOCAL accthost = LOCAL secret = secret } clients.conf client x.x.x.x { secret = secret shortname = prueba }
Ok. when i use tools NtRadPing with user [EMAIL PROTECTED] and password radius, everything is OK. Login OK: [EMAIL PROTECTED] (from client prueba port 0) But when i try with the same user and pass from a mode DSL that use a RedBack to authentication appear this mistake. rad_recv: Access-Request packet from host 200.58.72.31:1812, id=177, length=101 User-Name = "[EMAIL PROTECTED]" User-Password = "radius" NAS-Identifier = "Redback" NAS-Real-Port = 268438312 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 3892320806 Connect-Info = "ubr-adsl" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: Looking up realm "local" for User-Name = "[EMAIL PROTECTED]" rlm_realm: Found realm "local" rlm_realm: Adding Stripped-User-Name = "radius" rlm_realm: Proxying request from user radius to realm local rlm_realm: Adding Realm = "local" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 5 users: Matched DEFAULT at 99 users: Matched DEFAULT at 118 users: Matched DEFAULT at 130 modcall[authorize]: module "files" returns ok for request 5 modcall: group authorize returns ok for request 5 rad_check_password: Found Auth-Type System auth: type "System" ## i think here is the mistake, but i don´t understand why, in my user file put Auth-Type == Local and in the log appear System. Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_unix: [radius]: invalid password modcall[authenticate]: module "unix" returns reject for request 5 modcall: group authenticate returns reject for request 5 auth: Failed to validate the user. Login incorrect: [EMAIL PROTECTED]/radius] (from client iRedBack port 3892320806) Delaying request 5 for 1 seconds Finished request 5 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 177 to 200.58.72.31:1812 i think that mistake is when try to authentication, but i don´t understand, why in my user file put Auth-Type == Local and in the log appear System. how can i change it. Tnanks Alvaro ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html