Original Message
Subject:Auth configuration help
Date: Wed, 24 Aug 2011 21:53:46 -0400
From: Dom
To: freeradius-users@lists.freeradius.org
I was hoping someone could help. We have a cisco 3825 with radius
server pointed to our freeradius installation. When I test radius
authentication using NTRadping using CHAP authentication everything
works fine. However when we try to connect via a standard dsl
connection we get these failures. I was hoping someone could help point
me in the right direction to fix the issue.
Thanks
rad_recv: Access-Request packet from host 64.34.66.5 port 1645, id=26,
length=134
Framed-Protocol = PPP
User-Name = "aew...@domain.ca"
User-Password = "password"
Calling-Station-Id = "bas10530096"
Connect-Info = "10"
NAS-Port-Type = Virtual
NAS-Port = 26
NAS-Port-Id = "Uniq-Sess-ID26"
Service-Type = Framed-User
NAS-IP-Address = 64.34..
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] Looking up realm "tekcorner.ca" for User-Name = "aew...@domain.ca"
[suffix] No such realm "domain.ca"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
[files] users: Matched entry DEFAULT at line 172
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.
Authentication may fail because of this.
++[pap] returns noop
ERROR: No authenticate method (Auth-Type) found for the request:
Rejecting the user
Failed to authenticate the user.
Using Post-Auth-Type Reject
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> aew...@domain.ca
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 26 to 64.34.xxx.xxx port 1645
Waking up in 4.9 seconds.
Cleaning up request 0 ID 26 with timestamp +97
Ready to process requests.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html